From: Ankur Sharma <ankur.sha...@nutanix.com> This patch has northd changes to put port range in the logical flow based on configuration.
Port range is NOT applicable for stateless dnat_and_snat rules. Changes to parse the logical flow, which specifies port_range for ct_nat action. Example logical flow: ct_snat(10.15.24.135,1-30000) Signed-off-by: Ankur Sharma <ankur.sha...@nutanix.com> Acked-by: Mark Michelson <mmich...@redhat.com> --- include/ovn/actions.h | 7 ++++++ include/ovn/lex.h | 1 + lib/actions.c | 48 ++++++++++++++++++++++++++++++++++++++ lib/lex.c | 5 +++- northd/ovn-northd.c | 31 +++++++++++++++++++++---- tests/ovn-northd.at | 64 +++++++++++++++++++++++++++++++++++++++++++++++++++ tests/ovn.at | 34 +++++++++++++++++++++++---- 7 files changed, 180 insertions(+), 10 deletions(-) diff --git a/include/ovn/actions.h b/include/ovn/actions.h index 9b01492..2cec369 100644 --- a/include/ovn/actions.h +++ b/include/ovn/actions.h @@ -233,6 +233,13 @@ struct ovnact_ct_nat { struct in6_addr ipv6; ovs_be32 ipv4; }; + + struct { + bool exists; + uint16_t port_lo; + uint16_t port_hi; + } port_range; + uint8_t ltable; /* Logical table ID of next table. */ }; diff --git a/include/ovn/lex.h b/include/ovn/lex.h index 8d55857..1da6ccc 100644 --- a/include/ovn/lex.h +++ b/include/ovn/lex.h @@ -63,6 +63,7 @@ enum lex_type { LEX_T_EXCHANGE, /* <-> */ LEX_T_DECREMENT, /* -- */ LEX_T_COLON, /* : */ + LEX_T_HYPHEN, /* - */ }; /* Subtype for LEX_T_INTEGER and LEX_T_MASKED_INTEGER tokens. diff --git a/lib/actions.c b/lib/actions.c index 6351db7..5d9d93b 100644 --- a/lib/actions.c +++ b/lib/actions.c @@ -770,6 +770,38 @@ parse_ct_nat(struct action_context *ctx, const char *name, } lexer_get(ctx->lexer); + if (lexer_match(ctx->lexer, LEX_T_COMMA)) { + + if (ctx->lexer->token.type != LEX_T_INTEGER || + ctx->lexer->token.format != LEX_F_DECIMAL) { + lexer_syntax_error(ctx->lexer, "expecting Integer for port " + "range"); + } + + cn->port_range.port_lo = ntohll(ctx->lexer->token.value.integer); + lexer_get(ctx->lexer); + + if (lexer_match(ctx->lexer, LEX_T_HYPHEN)) { + + if (ctx->lexer->token.type != LEX_T_INTEGER) { + lexer_syntax_error(ctx->lexer, "expecting Integer for port " + "range"); + } + cn->port_range.port_hi = ntohll( + ctx->lexer->token.value.integer); + + if (cn->port_range.port_hi <= cn->port_range.port_lo) { + lexer_syntax_error(ctx->lexer, "range high should be " + "greater than range lo"); + } + lexer_get(ctx->lexer); + } else { + cn->port_range.port_hi = 0; + } + + cn->port_range.exists = true; + } + if (!lexer_force_match(ctx->lexer, LEX_T_RPAREN)) { return; } @@ -799,6 +831,17 @@ format_ct_nat(const struct ovnact_ct_nat *cn, const char *name, struct ds *s) ipv6_format_addr(&cn->ipv6, s); ds_put_char(s, ')'); } + + if (cn->port_range.exists) { + ds_chomp(s, ')'); + ds_put_format(s, ",%d", cn->port_range.port_lo); + + if (cn->port_range.port_hi) { + ds_put_format(s, "-%d", cn->port_range.port_hi); + } + ds_put_char(s, ')'); + } + ds_put_char(s, ';'); } @@ -861,6 +904,11 @@ encode_ct_nat(const struct ovnact_ct_nat *cn, } } + if (cn->port_range.exists) { + nat->range.proto.min = cn->port_range.port_lo; + nat->range.proto.max = cn->port_range.port_hi; + } + ofpacts->header = ofpbuf_push_uninit(ofpacts, nat_offset); ct = ofpacts->header; if (cn->family == AF_INET || cn->family == AF_INET6) { diff --git a/lib/lex.c b/lib/lex.c index 7a2ab41..94f6c77 100644 --- a/lib/lex.c +++ b/lib/lex.c @@ -301,6 +301,9 @@ lex_token_format(const struct lex_token *token, struct ds *s) case LEX_T_COLON: ds_put_char(s, ':'); break; + case LEX_T_HYPHEN: + ds_put_char(s, '-'); + break; default: OVS_NOT_REACHED(); } @@ -757,7 +760,7 @@ next: token->type = LEX_T_DECREMENT; p++; } else { - lex_error(token, "`-' is only valid as part of `--'."); + token->type = LEX_T_HYPHEN; } break; diff --git a/northd/ovn-northd.c b/northd/ovn-northd.c index 0762781..71d420d 100644 --- a/northd/ovn-northd.c +++ b/northd/ovn-northd.c @@ -8849,7 +8849,13 @@ build_lrouter_flows(struct hmap *datapaths, struct hmap *ports, is_v6 ? "6" : "4", nat->logical_ip); } else { ds_put_format(&actions, "flags.loopback = 1; " - "ct_dnat(%s);", nat->logical_ip); + "ct_dnat(%s", nat->logical_ip); + + if (strlen(nat->external_port_range)) { + ds_put_format(&actions, ",%s", + nat->external_port_range); + } + ds_put_format(&actions, ");"); } ovn_lflow_add_with_hint(lflows, od, S_ROUTER_IN_DNAT, 100, @@ -8877,8 +8883,12 @@ build_lrouter_flows(struct hmap *datapaths, struct hmap *ports, ds_put_format(&actions, "ip%s.dst=%s; next;", is_v6 ? "6" : "4", nat->logical_ip); } else { - ds_put_format(&actions, "ct_dnat(%s);", - nat->logical_ip); + ds_put_format(&actions, "ct_dnat(%s", nat->logical_ip); + if (strlen(nat->external_port_range)) { + ds_put_format(&actions, ",%s", + nat->external_port_range); + } + ds_put_format(&actions, ");"); } ovn_lflow_add_with_hint(lflows, od, S_ROUTER_IN_DNAT, 100, @@ -8982,8 +8992,14 @@ build_lrouter_flows(struct hmap *datapaths, struct hmap *ports, ds_put_format(&actions, "ip%s.src=%s; next;", is_v6 ? "6" : "4", nat->external_ip); } else { - ds_put_format(&actions, "ct_snat(%s);", + ds_put_format(&actions, "ct_snat(%s", nat->external_ip); + + if (strlen(nat->external_port_range)) { + ds_put_format(&actions, ",%s", + nat->external_port_range); + } + ds_put_format(&actions, ");"); } /* The priority here is calculated such that the @@ -9020,8 +9036,13 @@ build_lrouter_flows(struct hmap *datapaths, struct hmap *ports, ds_put_format(&actions, "ip%s.src=%s; next;", is_v6 ? "6" : "4", nat->external_ip); } else { - ds_put_format(&actions, "ct_snat(%s);", + ds_put_format(&actions, "ct_snat(%s", nat->external_ip); + if (strlen(nat->external_port_range)) { + ds_put_format(&actions, ",%s", + nat->external_port_range); + } + ds_put_format(&actions, ");"); } /* The priority here is calculated such that the diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at index d127152..8cc3f70 100644 --- a/tests/ovn-northd.at +++ b/tests/ovn-northd.at @@ -1074,6 +1074,70 @@ AT_CHECK([ovn-sbctl dump-flows R1 | grep ip6.src=| wc -l], [0], [2 AT_CLEANUP +AT_SETUP([ovn -- check portrange dnat, snat and dnat_and_snat rules]) +ovn_start + +ovn-sbctl chassis-add gw1 geneve 127.0.0.1 + +ovn-nbctl lr-add R1 +ovn-nbctl lrp-add R1 R1-S1 02:ac:10:01:00:01 172.16.1.1/24 + +ovn-nbctl ls-add S1 +ovn-nbctl lsp-add S1 S1-R1 +ovn-nbctl lsp-set-type S1-R1 router +ovn-nbctl lsp-set-addresses S1-R1 router +ovn-nbctl --wait=sb lsp-set-options S1-R1 router-port=R1-S1 + +ovn-nbctl lrp-set-gateway-chassis R1-S1 gw1 + +uuid=`ovn-sbctl --columns=_uuid --bare find Port_Binding logical_port=cr-R1-S1` +echo "CR-LRP UUID is: " $uuid + +# IPV4 +ovn-nbctl --portrange lr-nat-add R1 dnat_and_snat 172.16.1.1 50.0.0.11 1-3000 + +OVS_WAIT_UNTIL([test 2 = `ovn-sbctl dump-flows R1 | grep lr_in_unsnat | \ +wc -l`]) + +AT_CHECK([ovn-sbctl dump-flows R1 | grep ct_snat | grep 3000 | wc -l], [0], [1 +]) + +AT_CHECK([ovn-sbctl dump-flows R1 | grep ct_dnat | grep 3000 | wc -l], [0], [1 +]) + + +ovn-nbctl lr-nat-del R1 dnat_and_snat 172.16.1.1 + +ovn-nbctl --portrange lr-nat-add R1 snat 172.16.1.1 50.0.0.11 1-3000 + +OVS_WAIT_UNTIL([test 2 = `ovn-sbctl dump-flows R1 | grep lr_in_unsnat | \ +wc -l`]) + +AT_CHECK([ovn-sbctl dump-flows R1 | grep ct_snat | grep 3000 | wc -l], [0], [1 +]) + +AT_CHECK([ovn-sbctl dump-flows R1 | grep ct_dnat | grep 3000 | wc -l], [0], [0 +]) + +ovn-nbctl lr-nat-del R1 snat 172.16.1.1 + +ovn-nbctl --portrange --stateless lr-nat-add R1 dnat_and_snat 172.16.1.2 50.0.0.12 1-3000 +ovn-sbctl dump-flows R1 + +OVS_WAIT_UNTIL([test 3 = `ovn-sbctl dump-flows R1 | grep lr_in_unsnat | \ +wc -l`]) + +AT_CHECK([ovn-sbctl dump-flows R1 | grep ct_snat | grep 3000 | grep 172.16.1.2 | wc -l], [0], [0 +]) + +AT_CHECK([ovn-sbctl dump-flows R1 | grep ct_dnat | grep 3000 | grep 172.16.1.2 | wc -l], [0], [0 +]) + + +ovn-nbctl lr-nat-del R1 dnat_and_snat 172.16.1.1 + +AT_CLEANUP + AT_SETUP([ovn -- check Load balancer health check and Service Monitor sync]) AT_SKIP_IF([test $HAVE_PYTHON = no]) ovn_start diff --git a/tests/ovn.at b/tests/ovn.at index 0135838..314be47 100644 --- a/tests/ovn.at +++ b/tests/ovn.at @@ -136,7 +136,6 @@ fe:x => error("Invalid numeric constant.") (){}[[]]==!=<<=>>=!&&||..,;=<->--: => ( ) { } [[ ]] == != < <= > >= ! && || .. , ; = <-> -- : & => error("`&' is only valid as part of `&&'.") | => error("`|' is only valid as part of `||'.") -- => error("`-' is only valid as part of `--'.") ^ => error("Invalid character `^' in input.") ]) @@ -1049,15 +1048,29 @@ ct_dnat(192.168.1.2); ct_dnat(fd11::2); encodes as ct(commit,table=19,zone=NXM_NX_REG11[0..15],nat(dst=fd11::2)) has prereqs ip +ct_dnat(192.168.1.2, 1-3000); + formats as ct_dnat(192.168.1.2,1-3000); + encodes as ct(commit,table=19,zone=NXM_NX_REG11[0..15],nat(dst=192.168.1.2:1-3000)) + has prereqs ip ct_dnat(192.168.1.2, 192.168.1.3); - Syntax error at `,' expecting `)'. + Syntax error at `192.168.1.3' expecting Integer for port range. ct_dnat(foo); Syntax error at `foo' expecting IPv4 or IPv6 address. ct_dnat(foo, bar); Syntax error at `foo' expecting IPv4 or IPv6 address. ct_dnat(); Syntax error at `)' expecting IPv4 or IPv6 address. +ct_dnat(192.168.1.2, foo); + Syntax error at `foo' expecting Integer for port range. +ct_dnat(192.168.1.2, 1000-foo); + Syntax error at `foo' expecting Integer for port range. +ct_dnat(192.168.1.2, 1000); + formats as ct_dnat(192.168.1.2,1000); + encodes as ct(commit,table=19,zone=NXM_NX_REG11[0..15],nat(dst=192.168.1.2:1000)) + has prereqs ip +ct_dnat(192.168.1.2, 1000-100); + Syntax error at `100' range high should be greater than range lo. # ct_snat ct_snat; @@ -1069,16 +1082,29 @@ ct_snat(192.168.1.2); ct_snat(fd11::2); encodes as ct(commit,table=19,zone=NXM_NX_REG12[0..15],nat(src=fd11::2)) has prereqs ip +ct_snat(192.168.1.2, 1-3000); + formats as ct_snat(192.168.1.2,1-3000); + encodes as ct(commit,table=19,zone=NXM_NX_REG12[0..15],nat(src=192.168.1.2:1-3000)) + has prereqs ip ct_snat(192.168.1.2, 192.168.1.3); - Syntax error at `,' expecting `)'. + Syntax error at `192.168.1.3' expecting Integer for port range. ct_snat(foo); Syntax error at `foo' expecting IPv4 or IPv6 address. ct_snat(foo, bar); Syntax error at `foo' expecting IPv4 or IPv6 address. ct_snat(); Syntax error at `)' expecting IPv4 or IPv6 address. - +ct_snat(192.168.1.2, foo); + Syntax error at `foo' expecting Integer for port range. +ct_snat(192.168.1.2, 1000-foo); + Syntax error at `foo' expecting Integer for port range. +ct_snat(192.168.1.2, 1000); + formats as ct_snat(192.168.1.2,1000); + encodes as ct(commit,table=19,zone=NXM_NX_REG12[0..15],nat(src=192.168.1.2:1000)) + has prereqs ip +ct_snat(192.168.1.2, 1000-100); + Syntax error at `100' range high should be greater than range lo. # ct_clear ct_clear; encodes as ct_clear -- 1.8.3.1 _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev