-------- Forwarded Message --------
Subject: tracing ovs flows in br-int
Date: Mon, 18 Jan 2021 18:31:53 +0000
From: Brendan Doyle <brendan.do...@oracle.com>
Organization: Oracle Corporation
To: ovs-disc...@openvswitch.org
Hi Folks,
I'm trying to trace a flow through br-int but ovs-appctl ofproto/trace
br-int is not
giving me the output I expect to see.
I'm trying to trace the pkt below through br-int on the remote chassis.
The pkt
does get tunnel and delivered to its destination, which replies, and the
reply
is successfully tunneled back to the initiating host, so the flows are
working, but
I just can't seem to trace them.
pkt in question (extract from tcpdump):
------------------------------------------------------------------------------
00:00:00.000000 98:03:9b:59:af:1c > 98:03:9b:3f:d9:1e, ethertype IPv4
(0x0800), length 156: (tos 0x0, ttl 64, id 9804, offset 0, flags [DF],
proto UDP (17), length 142)
253.255.2.6.47096 > 253.255.0.35.6081: [udp sum ok] Geneve, Flags
[C], vni 0x392, proto TEB (0x6558), options [class Open Virtual
Networking (OVN) (0x102) type 0x80(C) len 8 data 00010007]
52:54:00:be:06:16 > 40:44:00:00:04:10, ethertype IPv4 (0x0800),
length 98: (tos 0x0, ttl 64, id 43284, offset 0, flags [DF], proto ICMP
(1), length 84)
192.16.1.6 > 169.254.169.254: ICMP echo request, id 25237, seq 1,
length 64
0x0000: 9803 9b3f d91e 9803 9b59 af1c 0800 4500
0x0010: 008e 264c 4000 4011 15eb fdff 0206 fdff
0x0020: 0023 b7f8 17c1 007a 10f4 0240 6558 0003
0x0030: 9200 0102 8001 0001 0007 4044 0000 0410
0x0040: 5254 00be 0616 0800 4500 0054 a914 4000
0x0050: 4001 7c81 c010 0106 a9fe a9fe 0800 f629
0x0060: 6295 0001 f166 0560 0000 0000 e3a5 0600
0x0070: 0000 0000 1011 1213 1415 1617 1819 1a1b
0x0080: 1c1d 1e1f 2021 2223 2425 2627 2829 2a2b
0x0090: 2c2d 2e2f 3031 3233 3435 3637
---------------------------------------------------------------------------
The ovs br-int details on the target chassis:
ovs-appctl dpif/show
system@ovs-system: hit:6576964 missed:4469
br-int:
br-int 65534/2: (internal)
ovn-ca-rai-0 2/1: (geneve: csum=true, key=flow, remote_ip=253.255.2.17)
ovn-ca-rai-1 11/1: (geneve: csum=true, key=flow,
remote_ip=253.255.0.34)
ovn-ca-rai-2 5/1: (geneve: csum=true, key=flow, remote_ip=253.255.0.33)
ovn-ca-rai-3 3/1: (geneve: csum=true, key=flow,
remote_ip=253.255.2.6) <-- tunnel port for VM host (3)
ovn-ca-rai-4 4/1: (geneve: csum=true, key=flow, remote_ip=253.255.2.5)
vethVn1M 84/3: (system) <-- Veth port (84)
I thought this command would replicate the pkt that is deviled to the
tunnel port
on the target chassis:
-------------------------------------------------------------
ovs-appctl ofproto/trace br-int in_port=3
98039b3fd91e98039b59af1c08004500008e264c4000401115ebfdff0206fdff0023b7f817c1007a10f402406558000392000102800100010007404400000410525400be0616080045000054a914400040017c81c0100106a9fea9fe0800f62962950001f166056000000000e3a5060000000000101112131415161718191a1b1c1d1e1f202122232425262728292a2b2c2d2e2f3031323334353637
Flow:
udp,in_port=3,vlan_tci=0x0000,dl_src=98:03:9b:59:af:1c,dl_dst=98:03:9b:3f:d9:1e,nw_src=253.255.2.6,nw_dst=253.255.0.35,nw_tos=0,nw_ecn=0,nw_ttl=64,tp_src=47096,tp_dst=6081
bridge("br-int")
----------------
0. in_port=3, priority 100
move:NXM_NX_TUN_ID[0..23]->OXM_OF_METADATA[0..23]
-> OXM_OF_METADATA[0..23] is now 0
move:NXM_NX_TUN_METADATA0[16..30]->NXM_NX_REG14[0..14]
-> NXM_NX_REG14[0..14] is now 0
move:NXM_NX_TUN_METADATA0[0..15]->NXM_NX_REG15[0..15]
-> NXM_NX_REG15[0..15] is now 0
resubmit(,33)
33. No match.
drop
Final flow: unchanged
Megaflow: recirc_id=0,eth,ip,tun_id=0/0xffffff,in_port=3,nw_frag=no
Datapath actions: drop
---------------------------------------------------------
But it says the packet is dropped, when in actual fact it is output on
port 84 as expected.
So I'm wondering am I inserting the pkt wrong? to the wrong port on the
remote chassis?
Thanks
Brendan.
_______________________________________________
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
