On Thu, Jun 3, 2021 at 5:29 AM <num...@ovn.org> wrote: > > From: Numan Siddique <num...@ovn.org> > > After the commit [1], we do a full recompute of ct zone I-P engine for > any datapath binding change. This results in physical_flow() getting > called. In a highly scaled environment this can result in costly CPU > cycles. This patch addressed this by handling the datapath binding > changes incrementally in the ct_zone engine node. ct zone recomputation > is required only when a datapath binding is deleted or a logical router > datapath binding changes the snat-ct-zone option value. This patch > handles this. > > [1] - f9cab11d5fab("Allow explicit setting of the SNAT zone on a gateway router.") > > Signed-off-by: Numan Siddique <num...@ovn.org> > --- > controller/ovn-controller.c | 55 ++++++++++++++++++++++++++++++++++++- > controller/physical.c | 5 ++++ > tests/ovn-performance.at | 26 ++++++++++++++++++ > 3 files changed, 85 insertions(+), 1 deletion(-) > > diff --git a/controller/ovn-controller.c b/controller/ovn-controller.c > index b49786441..5b55a45b7 100644 > --- a/controller/ovn-controller.c > +++ b/controller/ovn-controller.c > @@ -1734,6 +1734,58 @@ en_ct_zones_run(struct engine_node *node, void *data) > engine_set_node_state(node, EN_UPDATED); > } > > +/* Handles datapath binding changes for the ct_zones engine. > + * Returns false if the datapath is deleted or if the requested snat > + * ct zone doesn't match with the ct_zones data. */ > +static bool > +ct_zones_datapath_binding_handler(struct engine_node *node, void *data) > +{ > + struct ed_type_ct_zones *ct_zones_data = data; > + const struct sbrec_datapath_binding *dp; > + struct ed_type_runtime_data *rt_data = > + engine_get_input_data("runtime_data", node); > + struct sbrec_datapath_binding_table *dp_table = > + (struct sbrec_datapath_binding_table *)EN_OVSDB_GET( > + engine_get_input("SB_datapath_binding", node)); > + > + SBREC_DATAPATH_BINDING_TABLE_FOR_EACH_TRACKED (dp, dp_table) { > + if (!get_local_datapath(&rt_data->local_datapaths, > + dp->tunnel_key)) { > + continue; > + } > + > + if (sbrec_datapath_binding_is_deleted(dp)) { > + /* Fall back to full recompute of ct_zones engine. */ > + return false; > + }
What if a datapath_binding is created? Should we return false as well? > + > + int req_snat_zone = datapath_snat_ct_zone(dp); > + if (req_snat_zone == -1) { > + /* datapath snat ct zone is not set. This condition will also hit > + * when CMS clears the snat-ct-zone for the logical router. > + * In this case there is no harm in using the previosly specified > + * snat ct zone for this datapath. Also it is hard to know > + * if this option was cleared or if this option is never set. */ > + continue; > + } > + > + /* Check if the requested snat zone has changed for the datapath > + * or not. If so, then fall back to full recompute of > + * ct_zone engine. */ > + char *snat_dp_zone_key = alloc_nat_zone_key(&dp->header_.uuid, "snat"); > + struct simap_node *simap_node = simap_find(&ct_zones_data->current, > + snat_dp_zone_key); > + free(snat_dp_zone_key); > + if (!simap_node || simap_node->data != req_snat_zone) { > + /* There is no entry yet or the requested snat zone has changed. > + * Trigger full recompute of ct_zones engine. */ > + return false; > + } > + } > + > + return true; > +} > + > /* The data in the ct_zones node is always valid (i.e., no stale pointers). */ > static bool > en_ct_zones_is_valid(struct engine_node *node OVS_UNUSED) > @@ -2758,7 +2810,8 @@ main(int argc, char *argv[]) > > engine_add_input(&en_ct_zones, &en_ovs_open_vswitch, NULL); > engine_add_input(&en_ct_zones, &en_ovs_bridge, NULL); > - engine_add_input(&en_ct_zones, &en_sb_datapath_binding, NULL); > + engine_add_input(&en_ct_zones, &en_sb_datapath_binding, > + ct_zones_datapath_binding_handler); > engine_add_input(&en_ct_zones, &en_runtime_data, NULL); > > engine_add_input(&en_runtime_data, &en_ofctrl_is_connected, NULL); > diff --git a/controller/physical.c b/controller/physical.c > index 04259d44a..e70efc71d 100644 > --- a/controller/physical.c > +++ b/controller/physical.c > @@ -15,6 +15,7 @@ > > #include <config.h> > #include "binding.h" > +#include "coverage.h" > #include "byte-order.h" > #include "encaps.h" > #include "flow.h" > @@ -48,6 +49,8 @@ > > VLOG_DEFINE_THIS_MODULE(physical); > > +COVERAGE_DEFINE(physical_run); > + > /* Datapath zone IDs for connection tracking and NAT */ > struct zone_ids { > int ct; /* MFF_LOG_CT_ZONE. */ > @@ -1528,6 +1531,8 @@ void > physical_run(struct physical_ctx *p_ctx, > struct ovn_desired_flow_table *flow_table) > { > + COVERAGE_INC(physical_run); > + > if (!hc_uuid) { > hc_uuid = xmalloc(sizeof(struct uuid)); > uuid_generate(hc_uuid); > diff --git a/tests/ovn-performance.at b/tests/ovn-performance.at > index e510c6cef..61356e16d 100644 > --- a/tests/ovn-performance.at > +++ b/tests/ovn-performance.at > @@ -462,6 +462,32 @@ OVN_CONTROLLER_EXPECT_HIT_COND( > [ovn-nbctl --wait=hv lrp-set-gateway-chassis lr1-public hv3 30 && ovn-nbctl --wait=hv sync] > ) > > +# Test physical_run for logical router and other datapath binding changes. > +OVN_CONTROLLER_EXPECT_HIT_COND( > + [hv1 hv2 hv3 hv4 hv5], [physical_run], [>0 >0 >0 =0 =0], > + [ovn-nbctl --wait=hv set logical_router lr1 options:snat-ct-zone=10 && ovn-nbctl --wait=hv sync] > +) > + > +OVN_CONTROLLER_EXPECT_HIT_COND( > + [hv1 hv2 hv3 hv4 hv5], [physical_run], [>0 >0 >0 =0 =0], > + [ovn-nbctl --wait=hv set logical_router lr1 options:snat-ct-zone=11 && ovn-nbctl --wait=hv sync] > +) > + > +OVN_CONTROLLER_EXPECT_NO_HIT( > + [hv1 hv2 hv3 hv4 hv5], [physical_run], > + [ovn-nbctl --wait=hv remove logical_router lr1 options snat-ct-zone && ovn-nbctl --wait=hv sync] > +) > + > +OVN_CONTROLLER_EXPECT_NO_HIT( > + [hv1 hv2 hv3 hv4 hv5], [physical_run], > + [ovn-sbctl set datapath_binding lr1 external_ids:foo=bar && ovn-nbctl --wait=hv sync] > +) > + > +OVN_CONTROLLER_EXPECT_NO_HIT( > + [hv1 hv2 hv3 hv4 hv5], [physical_run], > + [ovn-sbctl set datapath_binding ls1 external_ids:foo=bar && ovn-nbctl --wait=hv sync] > +) > + > # After this, BFD should be enabled from hv1 and hv2 to hv3. > # So there should be lflow_run hits in hv1, hv2, hv3 and hv4 > OVN_CONTROLLER_EXPECT_HIT_COND( > -- > 2.31.1 > > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev