Thanks for doing the ddlog for this, comment below
On 29/06/2021 17:08, num...@ovn.org wrote:
From: Numan Siddique <num...@ovn.org>
The commit [1] didn't add the ddlog part.
[1] - 8087cbc7462("ovn-northd.c: Add proxy ARP support to OVN")
Signed-off-by: Numan Siddique <num...@ovn.org>
---
northd/ovn.dl | 1 +
northd/ovn.rs | 13 +++++++++++++
northd/ovn_northd.dl | 38 ++++++++++++++++++++++++++++++++++++++
tests/ovn.at | 4 ++--
4 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/northd/ovn.dl b/northd/ovn.dl
index f23ea3b9e1..3c7a734ddb 100644
--- a/northd/ovn.dl
+++ b/northd/ovn.dl
@@ -364,6 +364,7 @@ extern function is_dynamic_lsp_address(addr: string): bool
extern function extract_lsp_addresses(address: string):
Option<lport_addresses>
extern function extract_addresses(address: string): Option<lport_addresses>
extern function extract_lrp_networks(mac: string, networks: Set<string>):
Option<lport_addresses>
+extern function extract_ip_addresses(address: string): Option<lport_addresses>
extern function split_addresses(addr: string): (Set<string>, Set<string>)
diff --git a/northd/ovn.rs b/northd/ovn.rs
index d44f83bc75..5f0939409c 100644
--- a/northd/ovn.rs
+++ b/northd/ovn.rs
@@ -184,6 +184,18 @@ pub fn extract_lrp_networks(mac: &String, networks:
&ddlog_std::Set<String>) ->
}
}
+pub fn extract_ip_addresses(address: &String) -> ddlog_std::Option<lport_addresses> {
+ unsafe {
+ let mut laddrs: lport_addresses_c = Default::default();
+ if ovn_c::extract_ip_addresses(string2cstr(address).as_ptr(),
+ &mut laddrs as *mut lport_addresses_c) {
+ ddlog_std::Option::Some{x: laddrs.into_ddlog()}
+ } else {
+ ddlog_std::Option::None
+ }
+ }
+}
+
pub fn ovn_internal_version() -> String {
unsafe {
let s = ovn_c::ovn_get_internal_version();
@@ -623,6 +635,7 @@ mod ovn_c {
pub fn extract_addresses(address: *const raw::c_char, laddrs: *mut
lport_addresses_c, ofs: *mut raw::c_int) -> bool;
pub fn extract_lrp_networks__(mac: *const raw::c_char, networks:
*const *const raw::c_char,
n_networks: libc::size_t, laddrs: *mut
lport_addresses_c) -> bool;
+ pub fn extract_ip_addresses(address: *const raw::c_char, laddrs: *mut
lport_addresses_c) -> bool;
pub fn destroy_lport_addresses(addrs: *mut lport_addresses_c);
pub fn is_dynamic_lsp_address(address: *const raw::c_char) -> bool;
pub fn split_addresses(addresses: *const raw::c_char, ip4_addrs: *mut
ovs_svec, ipv6_addrs: *mut ovs_svec);
diff --git a/northd/ovn_northd.dl b/northd/ovn_northd.dl
index 52a6206a18..a7a327c7f0 100644
--- a/northd/ovn_northd.dl
+++ b/northd/ovn_northd.dl
@@ -3360,6 +3360,44 @@ for (CheckLspIsUp[check_lsp_is_up]) {
}
}
+Flow(.logical_datapath = sw._uuid,
+ .stage = s_SWITCH_IN_ARP_ND_RSP(),
+ .priority = 50,
+ .__match = __match,
+ .actions = __actions,
+ .external_ids = stage_hint(sp.lsp._uuid)) :-
+
+ sp in &SwitchPort(.sw = sw, .peer = Some{rp}),
+ rp.is_enabled(),
+ var proxy_ips = {
+ match (sp.lsp.options.get("arp_proxy")) {
+ None -> "",
+ Some {addresses} -> {
+ match (extract_ip_addresses(addresses)) {
+ None -> "",
+ Some{addr} -> {
+ var ip4_addrs = vec_empty();
+ for (ip4 in addr.ipv4_addrs) {
+ ip4_addrs.push("${ip4.addr}")
+ };
+ string_join(ip4_addrs, ",")
+ }
+ }
+ }
+ }
+ },
+ proxy_ips != "",
+ var __match = "arp.op == 1 && arp.tpa == {" ++ proxy_ips ++ "}",
+ var __actions = "eth.dst = eth.src; "
+ "eth.src = ${rp.networks.ea}; "
+ "arp.op = 2; /* ARP reply */ "
+ "arp.tha = arp.sha; "
+ "arp.sha = %s; "
+ "arp.tpa <-> arp.spa; "
+ "outport = inport; "
+ "flags.loopback = 1; "
+ "output;".
+
/* For ND solicitations, we need to listen for both the
* unicast IPv6 address and its all-nodes multicast address,
* but always respond with the unicast IPv6 address. */
diff --git a/tests/ovn.at b/tests/ovn.at
index db1a0a35c2..31f0b90996 100644
--- a/tests/ovn.at
+++ b/tests/ovn.at
@@ -26940,7 +26940,7 @@ ovs-vsctl -- add-port br-int vif1 -- \
# And proxy ARP flows for 69.254.239.254 and 169.254.239.2
# and check that SB flows have been added.
ovn-nbctl --wait=hv add Logical_Switch_Port rp-ls1 \
-options arp_proxy='"169.254.239.254 169.254.239.2"'
+options arp_proxy='"169.254.239.254,169.254.239.2"'
ovn-sbctl dump-flows > sbflows
AT_CAPTURE_FILE([sbflows])
@@ -26957,7 +26957,7 @@ AT_CHECK([ovn-sbctl dump-flows | grep ls_in_arp_rsp | grep "169.254.239.2"], [1]
# Add the flows back send arp request and check we see an ARP response
ovn-nbctl --wait=hv add Logical_Switch_Port rp-ls1 \
-options arp_proxy='"169.254.239.254 169.254.239.2"'
+options arp_proxy='"169.254.239.254,169.254.239.2"'
I think this change may break the non ddlog test. When I switched the
northd.c code
to use 'extract_ip_addresses()', I found that it expected the address
list to be of the form
"10.0.0.4 10.0.0.5" rather than comma separated. Hence I updated the
test in ovn.at
to use a non comma separated address list.
ls1_p1_mac=00:00:00:01:02:03
ls1_p1_ip=192.16.1.6
_______________________________________________
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev