Introduce build_check_pkt_len_flows_for_lrp routine to configure check_pkt_larger logical flow for a given logical port. This is a preliminary patch to enable check_pkt_larger support for gw router use case.
Acked-by: Mark Michelson <mmich...@redhat.com> Acked-by: Mark D. Gray <mark.d.g...@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianc...@redhat.com> --- northd/ovn-northd.c | 203 +++++++++++++++++++++++--------------------- 1 file changed, 107 insertions(+), 96 deletions(-) diff --git a/northd/ovn-northd.c b/northd/ovn-northd.c index ebe12cace..18f6f90ce 100644 --- a/northd/ovn-northd.c +++ b/northd/ovn-northd.c @@ -10914,6 +10914,110 @@ build_arp_resolve_flows_for_lrouter_port( } +static void +build_check_pkt_len_flows_for_lrp(struct ovn_port *op, + struct hmap *lflows, struct hmap *ports, + struct shash *meter_groups, struct ds *match, + struct ds *actions) +{ + int gw_mtu = 0; + + if (op->nbrp) { + gw_mtu = smap_get_int(&op->nbrp->options, "gateway_mtu", 0); + } + /* Add the flows only if gateway_mtu is configured. */ + if (gw_mtu <= 0) { + return; + } + + ds_clear(match); + ds_put_format(match, "outport == %s", op->json_key); + + ds_clear(actions); + ds_put_format(actions, + REGBIT_PKT_LARGER" = check_pkt_larger(%d);" + " next;", gw_mtu + VLAN_ETH_HEADER_LEN); + ovn_lflow_add_with_hint(lflows, op->od, S_ROUTER_IN_CHK_PKT_LEN, 50, + ds_cstr(match), ds_cstr(actions), + &op->nbrp->header_); + + for (size_t i = 0; i < op->od->nbr->n_ports; i++) { + struct ovn_port *rp = ovn_port_find(ports, + op->od->nbr->ports[i]->name); + if (!rp || rp == op) { + continue; + } + + if (rp->lrp_networks.ipv4_addrs) { + ds_clear(match); + ds_put_format(match, "inport == %s && outport == %s" + " && ip4 && "REGBIT_PKT_LARGER, + rp->json_key, op->json_key); + + ds_clear(actions); + /* Set icmp4.frag_mtu to gw_mtu */ + ds_put_format(actions, + "icmp4_error {" + REGBIT_EGRESS_LOOPBACK" = 1; " + "eth.dst = %s; " + "ip4.dst = ip4.src; " + "ip4.src = %s; " + "ip.ttl = 255; " + "icmp4.type = 3; /* Destination Unreachable. */ " + "icmp4.code = 4; /* Frag Needed and DF was Set. */ " + "icmp4.frag_mtu = %d; " + "next(pipeline=ingress, table=%d); };", + rp->lrp_networks.ea_s, + rp->lrp_networks.ipv4_addrs[0].addr_s, + gw_mtu, + ovn_stage_get_table(S_ROUTER_IN_ADMISSION)); + ovn_lflow_add_with_hint__(lflows, op->od, + S_ROUTER_IN_LARGER_PKTS, 50, + ds_cstr(match), ds_cstr(actions), + NULL, + copp_meter_get( + COPP_ICMP4_ERR, + rp->od->nbr->copp, + meter_groups), + &rp->nbrp->header_); + } + + if (rp->lrp_networks.ipv6_addrs) { + ds_clear(match); + ds_put_format(match, "inport == %s && outport == %s" + " && ip6 && "REGBIT_PKT_LARGER, + rp->json_key, op->json_key); + + ds_clear(actions); + /* Set icmp6.frag_mtu to gw_mtu */ + ds_put_format(actions, + "icmp6_error {" + REGBIT_EGRESS_LOOPBACK" = 1; " + "eth.dst = %s; " + "ip6.dst = ip6.src; " + "ip6.src = %s; " + "ip.ttl = 255; " + "icmp6.type = 2; /* Packet Too Big. */ " + "icmp6.code = 0; " + "icmp6.frag_mtu = %d; " + "next(pipeline=ingress, table=%d); };", + rp->lrp_networks.ea_s, + rp->lrp_networks.ipv6_addrs[0].addr_s, + gw_mtu, + ovn_stage_get_table(S_ROUTER_IN_ADMISSION)); + ovn_lflow_add_with_hint__(lflows, op->od, + S_ROUTER_IN_LARGER_PKTS, 50, + ds_cstr(match), ds_cstr(actions), + NULL, + copp_meter_get( + COPP_ICMP6_ERR, + rp->od->nbr->copp, + meter_groups), + &rp->nbrp->header_); + } + } +} + /* Local router ingress table CHK_PKT_LEN: Check packet length. * * Any IPv4 packet with outport set to the distributed gateway @@ -10943,102 +11047,9 @@ build_check_pkt_len_flows_for_lrouter( "next;"); if (od->l3dgw_port && od->l3redirect_port) { - int gw_mtu = 0; - if (od->l3dgw_port->nbrp) { - gw_mtu = smap_get_int(&od->l3dgw_port->nbrp->options, - "gateway_mtu", 0); - } - /* Add the flows only if gateway_mtu is configured. */ - if (gw_mtu <= 0) { - return; - } - - ds_clear(match); - ds_put_format(match, "outport == %s", od->l3dgw_port->json_key); - - ds_clear(actions); - ds_put_format(actions, - REGBIT_PKT_LARGER" = check_pkt_larger(%d);" - " next;", gw_mtu + VLAN_ETH_HEADER_LEN); - ovn_lflow_add_with_hint(lflows, od, S_ROUTER_IN_CHK_PKT_LEN, 50, - ds_cstr(match), ds_cstr(actions), - &od->l3dgw_port->nbrp->header_); - - for (size_t i = 0; i < od->nbr->n_ports; i++) { - struct ovn_port *rp = ovn_port_find(ports, - od->nbr->ports[i]->name); - if (!rp || rp == od->l3dgw_port) { - continue; - } - - if (rp->lrp_networks.ipv4_addrs) { - ds_clear(match); - ds_put_format(match, "inport == %s && outport == %s" - " && ip4 && "REGBIT_PKT_LARGER, - rp->json_key, od->l3dgw_port->json_key); - - ds_clear(actions); - /* Set icmp4.frag_mtu to gw_mtu */ - ds_put_format(actions, - "icmp4_error {" - REGBIT_EGRESS_LOOPBACK" = 1; " - "eth.dst = %s; " - "ip4.dst = ip4.src; " - "ip4.src = %s; " - "ip.ttl = 255; " - "icmp4.type = 3; /* Destination Unreachable. */ " - "icmp4.code = 4; /* Frag Needed and DF was Set. */ " - "icmp4.frag_mtu = %d; " - "next(pipeline=ingress, table=%d); };", - rp->lrp_networks.ea_s, - rp->lrp_networks.ipv4_addrs[0].addr_s, - gw_mtu, - ovn_stage_get_table(S_ROUTER_IN_ADMISSION)); - ovn_lflow_add_with_hint__(lflows, od, - S_ROUTER_IN_LARGER_PKTS, 50, - ds_cstr(match), ds_cstr(actions), - NULL, - copp_meter_get( - COPP_ICMP4_ERR, - rp->od->nbr->copp, - meter_groups), - &rp->nbrp->header_); - } - - if (rp->lrp_networks.ipv6_addrs) { - ds_clear(match); - ds_put_format(match, "inport == %s && outport == %s" - " && ip6 && "REGBIT_PKT_LARGER, - rp->json_key, od->l3dgw_port->json_key); - - ds_clear(actions); - /* Set icmp6.frag_mtu to gw_mtu */ - ds_put_format(actions, - "icmp6_error {" - REGBIT_EGRESS_LOOPBACK" = 1; " - "eth.dst = %s; " - "ip6.dst = ip6.src; " - "ip6.src = %s; " - "ip.ttl = 255; " - "icmp6.type = 2; /* Packet Too Big. */ " - "icmp6.code = 0; " - "icmp6.frag_mtu = %d; " - "next(pipeline=ingress, table=%d); };", - rp->lrp_networks.ea_s, - rp->lrp_networks.ipv6_addrs[0].addr_s, - gw_mtu, - ovn_stage_get_table(S_ROUTER_IN_ADMISSION)); - ovn_lflow_add_with_hint__(lflows, od, - S_ROUTER_IN_LARGER_PKTS, 50, - ds_cstr(match), ds_cstr(actions), - NULL, - copp_meter_get( - COPP_ICMP6_ERR, - rp->od->nbr->copp, - meter_groups), - &rp->nbrp->header_); - } - } + build_check_pkt_len_flows_for_lrp(od->l3dgw_port, lflows, + ports, meter_groups, + match, actions); } } } -- 2.31.1 _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev