Hi Dumitru, nice to see it unified, thank you.
Acked-by: Ales Musil <amu...@redhat.com> On Tue, Jul 19, 2022 at 10:43 PM Dumitru Ceara <dce...@redhat.com> wrote: > Signed-off-by: Dumitru Ceara <dce...@redhat.com> > --- > V2: Rebase and fix up new calls in test "localnet connectivity with > multiple requested-chassis" > --- > tests/ovn-macros.at | 20 +++ > tests/ovn.at | 364 > ++++----------------------------------------------- > 2 files changed, 46 insertions(+), 338 deletions(-) > > diff --git a/tests/ovn-macros.at b/tests/ovn-macros.at > index 427b7b669..0ad6b58c4 100644 > --- a/tests/ovn-macros.at > +++ b/tests/ovn-macros.at > @@ -511,9 +511,13 @@ wait_for_ports_up() { > fi > } > > -# reset_pcap_file iface pcap_file > +# reset_iface_pcap_file iface pcap_file > # Resets the pcap file associates with OVS interface. should be used > # with dummy datapath. > +# > +# XXX: This should actually replace reset_pcap_file() as they do almost > +# exactly the same thing but the "wait while the pcap file has the size > +# of the PCAP header" check causes tests to fail. > reset_iface_pcap_file() { > local iface=$1 > local pcap_file=$2 > @@ -528,6 +532,20 @@ options:rxq_pcap=${pcap_file}-rx.pcap > OVS_WAIT_WHILE([test 24 = $(wc -c ${pcap_file}-tx.pcap | cut -d " " > -f1)]) > } > > +# reset_pcap_file iface pcap_file > +# Resets the pcap file associates with OVS interface. should be used > +# with dummy datapath. > +reset_pcap_file() { > + local iface=$1 > + local pcap_file=$2 > + check rm -f dummy-*.pcap > + check ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap > \ > +options:rxq_pcap=dummy-rx.pcap > + check rm -f ${pcap_file}*.pcap > + check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > +options:rxq_pcap=${pcap_file}-rx.pcap > +} > + > # Receive a packet on a dummy netdev interface. If we expect packets to be > # recorded, then wait until the pcap file reflects the change. > netdev_dummy_receive() { > diff --git a/tests/ovn.at b/tests/ovn.at > index 7d10610fd..a3e8a7758 100644 > --- a/tests/ovn.at > +++ b/tests/ovn.at > @@ -6487,16 +6487,6 @@ compare_dhcp_packets() { > fi > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - check ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap > \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > AT_CAPTURE_FILE([sbflows]) > ovn-sbctl dump-flows > sbflows > > @@ -7082,16 +7072,6 @@ test_dhcpv6() { > as hv1 ovs-appctl netdev-dummy/receive hv1-vif$inport $request > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > AT_CAPTURE_FILE([ofctl_monitor0.log]) > as hv1 ovs-ofctl monitor br-int resume --detach --no-chdir \ > --pidfile=ovs-ofctl0.pid 2> ofctl_monitor0.log > @@ -8789,16 +8769,6 @@ OVS_WAIT_UNTIL([ > ]) > ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 > nat-addresses="f0:00:00:00:00:03 192.168.0.3" > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > reset_pcap_file snoopvif hv1/snoopvif > OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 140]) > > @@ -8873,20 +8843,8 @@ OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"]) > # Otherwise a garp might be sent after pcap have been reset but before > chassis is removed > AT_CHECK([ovn-nbctl --wait=hv remove logical_router lr0 options chassis]) > > -reset_pcap_file() { > - local hv=$1 > - local iface=$2 > - local pcap_file=$3 > - as $hv > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > -reset_pcap_file hv1 snoopvif hv1/snoopvif > -reset_pcap_file hv2 snoopvif hv2/snoopvif > +as hv1 reset_pcap_file snoopvif hv1/snoopvif > +as hv2 reset_pcap_file snoopvif hv2/snoopvif > > hv1_uuid=$(ovn-sbctl --bare --columns _uuid list chassis hv1) > AT_CHECK([ovn-nbctl set logical_router lr0 options:chassis=hv1]) > @@ -8902,8 +8860,8 @@ OVN_CHECK_PACKETS([hv2/snoopvif-tx.pcap], > [empty_expected]) > # Temporarily remove lr0 chassis > AT_CHECK([ovn-nbctl remove logical_router lr0 options chassis]) > > -reset_pcap_file hv1 snoopvif hv1/snoopvif > -reset_pcap_file hv2 snoopvif hv2/snoopvif > +as hv1 reset_pcap_file snoopvif hv1/snoopvif > +as hv2 reset_pcap_file snoopvif hv2/snoopvif > > hv2_uuid=$(ovn-sbctl --bare --columns _uuid list chassis hv2) > AT_CHECK([ovn-nbctl set logical_router lr0 options:chassis=hv2]) > @@ -8988,16 +8946,6 @@ AT_CHECK([sort packets], [0], [expout]) > # due to GARP backoff > ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="" > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > as hv1 reset_pcap_file snoopvif hv1/snoopvif > > # Re-add nat-addresses option > @@ -10475,16 +10423,6 @@ AT_CAPTURE_FILE([dns]) > ovn-sbctl dump-flows > sbflows > AT_CAPTURE_FILE([sbflows]) > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > # set_dns_params host_name > # Sets the dns_req_data and dns_resp_data > set_dns_params() { > @@ -11862,16 +11800,6 @@ sort packets | cat > # due to GARP backoff > ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="" > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > as hv1 reset_pcap_file snoopvif hv1/snoopvif > > # Add OVS ports for foo1 and foo2 on hv3 > @@ -12137,15 +12065,6 @@ AS_BOX([Verify packet at outside1 i.e > nexthop(172.16.1.1) port]) > > > expected=${nexthop_mac}${gw_mac}08004500001c000000003f110100${foo1_ip}${dst_ip}0035111100080000 > echo $expected > hv3-vif1.expected > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > check as hv1 ovs-appctl dpctl/del-flows > > as hv1 reset_pcap_file br-ex_n2 hv1/br-ex_n2 > @@ -12306,16 +12225,6 @@ ovs-vsctl -- add-port br-int hv1-vif3 -- \ > wait_for_ports_up > check ovn-nbctl --wait=hv sync > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > # Make sure that ovn-controller has installed the corresponding OF Flow. > OVS_WAIT_UNTIL([test 1 = `as hv1 ovs-ofctl dump-flows br-int | grep -c > "ipv6_dst=ff02::2,nw_ttl=255,icmp_type=133,icmp_code=0"`]) > > @@ -13563,16 +13472,6 @@ wait_for_ports_up > check ovn-nbctl --wait=hv sync > OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"] ["hv3"]) > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > as hv1 reset_pcap_file snoopvif hv1/snoopvif > as hv2 reset_pcap_file br-phys_n1 hv2/br-phys_n1 > as hv3 reset_pcap_file br-phys_n1 hv3/br-phys_n1 > @@ -13909,16 +13808,6 @@ trim_zeros() { > sed 's/\(00\)\{1,\}$//' > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > # Test the IPv6 Neighbor Solicitation (NS) - nd_ns action for unknown MAC > # addresses. ovn-controller should generate an IPv6 NS request for IPv6 > # packets whose MAC is unknown (in the ARP_REQUEST router pipeline stage. > @@ -14305,23 +14194,12 @@ send_arp() { > echo "${request}" > } > > -reset_pcap_file() { > - local hv=$1 > - local iface=$2 > - local pcap_file=$3 > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=dummy-tx.pcap \ > - > options:rxq_pcap=dummy-rx.pcap > - check rm -f ${pcap_file}*.pcap > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > - > options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > reset_env() { > - reset_pcap_file hv1 first hv1/first > - reset_pcap_file hv2 second hv2/second > - reset_pcap_file hv3 third hv3/third > - reset_pcap_file hv1 migrator hv1/migrator > - reset_pcap_file hv2 migrator hv2/migrator > + as hv1 reset_pcap_file first hv1/first > + as hv2 reset_pcap_file second hv2/second > + as hv3 reset_pcap_file third hv3/third > + as hv1 reset_pcap_file migrator hv1/migrator > + as hv2 reset_pcap_file migrator hv2/migrator > > for port in hv1/migrator hv2/migrator hv1/first hv2/second hv3/third; > do > : > $port.expected > @@ -14653,23 +14531,12 @@ send_garp() { > echo "${request}" > } > > -reset_pcap_file() { > - local hv=$1 > - local iface=$2 > - local pcap_file=$3 > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=dummy-tx.pcap \ > - > options:rxq_pcap=dummy-rx.pcap > - check rm -f ${pcap_file}*.pcap > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > - > options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > reset_env() { > - reset_pcap_file hv1 first hv1/first > - reset_pcap_file hv2 second hv2/second > - reset_pcap_file hv3 third hv3/third > - reset_pcap_file hv1 migrator hv1/migrator > - reset_pcap_file hv2 migrator hv2/migrator > + as hv1 reset_pcap_file first hv1/first > + as hv2 reset_pcap_file second hv2/second > + as hv3 reset_pcap_file third hv3/third > + as hv1 reset_pcap_file migrator hv1/migrator > + as hv2 reset_pcap_file migrator hv2/migrator > > for port in hv1/migrator hv2/migrator hv1/first hv2/second hv3/third; > do > : > $port.expected > @@ -14679,9 +14546,9 @@ reset_env() { > : > $hv/n1.expected > done > > - reset_pcap_file hv1 br-phys_n1 hv1/br-phys_n1 > - reset_pcap_file hv2 br-phys_n1 hv2/br-phys_n1 > - reset_pcap_file hv3 br-phys_n1 hv3/br-phys_n1 > + as hv1 reset_pcap_file br-phys_n1 hv1/br-phys_n1 > + as hv2 reset_pcap_file br-phys_n1 hv2/br-phys_n1 > + as hv3 reset_pcap_file br-phys_n1 hv3/br-phys_n1 > } > > check_packets() { > @@ -15072,23 +14939,12 @@ send_rarp() { > echo "${request}" > } > > -reset_pcap_file() { > - local hv=$1 > - local iface=$2 > - local pcap_file=$3 > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=dummy-tx.pcap \ > - > options:rxq_pcap=dummy-rx.pcap > - check rm -f ${pcap_file}*.pcap > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > - > options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > reset_env() { > - reset_pcap_file hv1 migrator hv1/migrator > - reset_pcap_file hv2 migrator hv2/migrator > - reset_pcap_file hv1 first hv1/first > - reset_pcap_file hv2 second hv2/second > - reset_pcap_file hv3 outside hv3/outside > + as hv1 reset_pcap_file migrator hv1/migrator > + as hv2 reset_pcap_file migrator hv2/migrator > + as hv1 reset_pcap_file first hv1/first > + as hv2 reset_pcap_file second hv2/second > + as hv3 reset_pcap_file outside hv3/outside > > for port in hv1/migrator hv2/migrator hv1/first hv2/second > hv3/outside; do > : > $port.expected > @@ -15268,21 +15124,10 @@ send_rarp() { > echo "${request}" > } > > -reset_pcap_file() { > - local hv=$1 > - local iface=$2 > - local pcap_file=$3 > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=dummy-tx.pcap \ > - > options:rxq_pcap=dummy-rx.pcap > - check rm -f ${pcap_file}*.pcap > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > - > options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > reset_env() { > - reset_pcap_file hv1 migrator hv1/migrator > - reset_pcap_file hv2 migrator hv2/migrator > - reset_pcap_file hv1 first hv1/first > + as hv1 reset_pcap_file migrator hv1/migrator > + as hv2 reset_pcap_file migrator hv2/migrator > + as hv1 reset_pcap_file first hv1/first > > for port in hv1/migrator hv2/migrator hv1/first; do > : > $port.expected > @@ -15552,17 +15397,6 @@ done > OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up sw-p1` = xup]) > OVS_WAIT_UNTIL([test x`ovn-nbctl lsp-get-up sw-p2` = xup]) > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > - > -} > - > construct_expected_ra() { > local src_mac=000000000001 > local dst_mac=333300000001 > @@ -15712,20 +15546,9 @@ for hv in hv1 hv2; do > options:rxq_pcap=$hv/port-rx.pcap > done > > -reset_pcap_file() { > - local hv=$1 > - local iface=$2 > - local pcap_file=$3 > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=dummy-tx.pcap \ > - > options:rxq_pcap=dummy-rx.pcap > - check rm -f ${pcap_file}*.pcap > - as $hv check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > - > options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > reset_env() { > - reset_pcap_file hv1 br-phys_n1 hv1/br-phys_n1 > - reset_pcap_file hv2 br-phys_n1 hv2/br-phys_n1 > + as hv1 reset_pcap_file br-phys_n1 hv1/br-phys_n1 > + as hv2 reset_pcap_file br-phys_n1 hv2/br-phys_n1 > > for port in hv1/n1 hv2/n1; do > : > $port.expected > @@ -15826,17 +15649,6 @@ done > > wait_for_ports_up > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > - > -} > - > construct_expected_ra() { > local src_mac=000000000001 > local dst_mac=333300000001 > @@ -16868,17 +16680,6 @@ ${dst_ip}0035111100080000 > done > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > - > sip=`ip_to_hex 10 0 0 4` > dip=`ip_to_hex 10 0 0 6` > > @@ -17171,16 +16972,6 @@ ${dst_ip}0035111100080000 > done > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - check ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap > \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > # Add a default deny ACL and an allow ACL for specific IP traffic. > check ovn-nbctl acl-add ls1 to-lport 2 'arp' allow > check ovn-nbctl acl-add ls1 to-lport 1 'ip4' drop > @@ -18414,16 +18205,6 @@ test_dhcpv6() { > as hv1 ovs-appctl netdev-dummy/receive hv${inport}-ext${inport} > $request > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > AT_CAPTURE_FILE([ofctl_monitor0_hv1.log]) > as hv1 ovs-ofctl monitor br-int resume --detach --no-chdir \ > --pidfile=ovs-ofctl0.pid 2> ofctl_monitor0_hv1.log > @@ -19097,16 +18878,6 @@ ovs-vsctl -- add-port br-int hv1-vif2 -- \ > options:rxq_pcap=hv1/vif2-rx.pcap \ > ofport-request=1 > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > - options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > - options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > # IPv4 outgoing traffic generated inside the cluster > test_ip_packet_larger() { > local mtu=$1 > @@ -21016,16 +20787,6 @@ ovn_start > # - 1 port bound on hv2 (sw3-p2) > # - 1 localnet port (sw3-ln) > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - check ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap > \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > ovn-nbctl ls-add sw1 > ovn-nbctl ls-add sw2 > ovn-nbctl ls-add sw3 > @@ -21602,16 +21363,6 @@ ovn_start > # - 1 port bound on hv2 (sw2-p2) > # - IGMP Querier from 20.0.0.254 > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - check ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap > \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > check ovn-nbctl ls-add sw1 \ > -- lsp-add sw1 sw1-p1 > > @@ -21758,16 +21509,6 @@ ovn_start > # - 1 port bound on hv2 (sw3-p2) > # - 1 localnet port (sw3-ln) > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - check ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap > \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - check ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > check ovn-nbctl ls-add sw1 > check ovn-nbctl ls-add sw2 > check ovn-nbctl ls-add sw3 > @@ -25732,16 +25473,6 @@ OVN_FOR_EACH_NORTHD([ > AT_SETUP([Load Balancer LS hairpin]) > ovn_start > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > build_udp() { > local sport=$1 dport=$2 chksum=$3 > local len=000a > @@ -28038,16 +27769,6 @@ ovs-vsctl -- add-port br-phys hv2-phys1 -- \ > options:rxq_pcap=hv2/phys1-rx.pcap \ > ofport-request=1 > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > send_arp_request() { > local eth_src=$1 spa=$2 tpa=$3 > local eth_dst=ffffffffffff > @@ -28207,17 +27928,6 @@ ${dst_ip}0035111100080000 > done > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > - > # Create overlapping ACLs resulting in duplicated desired OVS flows > check ovn-nbctl acl-add ls1 to-lport 1001 \ > 'outport == "lsp1" && ip4 && ip4.src == 10.0.0.2' allow > @@ -28325,16 +28035,6 @@ ${dst_ip}0035111100080000 > done > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > # Create an address set > ovn-nbctl create Address_Set name=as1 \ > addresses=\"10.0.0.2\",\"10.0.0.3\" > @@ -29525,16 +29225,6 @@ send_icmp_packet() { > as hv$hv ovs-appctl netdev-dummy/receive hv$hv-vif$inport $packet > } > > -reset_pcap_file() { > - local iface=$1 > - local pcap_file=$2 > - ovs-vsctl -- set Interface $iface options:tx_pcap=dummy-tx.pcap \ > -options:rxq_pcap=dummy-rx.pcap > - rm -f ${pcap_file}*.pcap > - ovs-vsctl -- set Interface $iface > options:tx_pcap=${pcap_file}-tx.pcap \ > -options:rxq_pcap=${pcap_file}-rx.pcap > -} > - > trim_zeros() { > sed 's/\(00\)\{1,\}$//' > } > > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > -- Ales Musil Senior Software Engineer - OVN Core Red Hat EMEA <https://www.redhat.com> amu...@redhat.com IM: amusil <https://red.ht/sig> _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev