On Tue, Sep 20, 2022 at 2:05 AM Ihar Hrachyshka <ihrac...@redhat.com> wrote:
> Signed-off-by: Ihar Hrachyshka <ihrac...@redhat.com> > --- > tests/ovn.at | 124 +++++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 124 insertions(+) > > diff --git a/tests/ovn.at b/tests/ovn.at > index cd4561069..564a5c149 100644 > --- a/tests/ovn.at > +++ b/tests/ovn.at > @@ -33084,3 +33084,127 @@ OVS_WAIT_UNTIL([ovs-vsctl --columns _uuid --bare > find Port \ > OVN_CLEANUP([hv1]) > AT_CLEANUP > ]) > + > +OVN_FOR_EACH_NORTHD([ > +AT_SETUP([multiple controllers on the same host can talk to each other]) > +AT_KEYWORDS([ovntest]) > +ovn_start > +net_add n1 > + > +sim_add hv1 > +as hv1 > +ovs-vsctl add-br br-phys-1 > +ovs-vsctl add-br br-phys-2 > +ovs-vsctl set open . external-ids:ovn-bridge-mappings-hv1=phys:br-phys-1 > +ovs-vsctl set open . external-ids:ovn-bridge-mappings-hv2=phys:br-phys-2 > + > +ovn_attach n1 br-phys-1 192.168.1.1 24 > + > +# the file is read once at startup so it's safe to write it > +# here after the first ovn-controller has started > +echo hv2 > ${OVN_SYSCONFDIR}/system-id-override > + > +# This function is similar to ovn_attach but makes sure it doesn't > +# mess with another controller settings > +start_virtual_controller() { > + local net=$1 bridge=$2 int_bridge=$3 ip=$4 masklen=${5-24} > encap=${6-geneve,vxlan} systemid=${7-$sandbox} cli_args=${@:8} > + net_attach $net $bridge || return 1 > + > + mac=`ovs-vsctl get Interface $bridge mac_in_use | sed s/\"//g` > + arp_table="$arp_table $sandbox,$bridge,$ip,$mac" > + ovs-appctl netdev-dummy/ip4addr $bridge $ip/$masklen >/dev/null || > return 1 > + ovs-appctl ovs/route/add $ip/$masklen $bridge >/dev/null || return 1 > + > + local ovn_remote > + if test X$HAVE_OPENSSL = Xyes; then > + ovn_remote=$SSL_OVN_SB_DB > + else > + ovn_remote=unix:$ovs_base/ovn-sb/ovn-sb.sock > + fi > + ovs-vsctl \ > + -- set Open_vSwitch . > external-ids:ovn-remote-$systemid=$ovn_remote \ > + -- set Open_vSwitch . > external-ids:ovn-encap-type-$systemid=$encap \ > + -- set Open_vSwitch . external-ids:ovn-encap-ip-$systemid=$ip \ > + -- set Open_vSwitch . > external-ids:ovn-bridge-$systemid=$int_bridge \ > + -- --may-exist add-br $int_bridge \ > + -- set bridge $int_bridge fail-mode=secure > other-config:disable-in-band=true \ > + || return 1 > + > + ovn-controller --enable-dummy-vif-plug ${cli_args} -vconsole:off > --detach --no-chdir > +} > + > +# for some reason SSL ovsdb configuration overrides CLI, so > +# delete ssl config from ovsdb to give CLI arguments priority > +ovs-vsctl del-ssl > + > +start_virtual_controller n1 br-phys-2 br-int-2 192.168.2.1 24 > geneve,vxlan hv2 \ > + --pidfile=${OVS_RUNDIR}/ovn-controller-2.pid \ > + --log-file=${OVS_RUNDIR}/ovn-controller-2.log \ > + -p $PKIDIR/testpki-hv2-privkey.pem \ > + -c $PKIDIR/testpki-hv2-cert.pem \ > + -C $PKIDIR/testpki-cacert.pem > +pidfile="$OVS_RUNDIR"/ovn-controller-2.pid > +on_exit "test -e \"$pidfile\" && kill \`cat \"$pidfile\"\`" > + > +# Disable local ARP responder to pass ARP requests through tunnels > +check ovn-nbctl \ > + ls-add ls \ > + -- add Logical_Switch ls other_config vlan-passthru=true > +ovn-nbctl lsp-add ls lp1 > +ovn-nbctl lsp-add ls lp2 > +ovn-nbctl lsp-set-addresses lp1 "00:00:00:00:00:01 10.0.0.1" > +ovn-nbctl lsp-set-addresses lp2 "00:00:00:00:00:02 10.0.0.2" > + > +ovn-nbctl lsp-add ls ln_port > +ovn-nbctl lsp-set-addresses ln_port unknown > +ovn-nbctl lsp-set-type ln_port localnet > +ovn-nbctl lsp-set-options ln_port network_name=phys > + > +ovs-vsctl -- add-port br-int vif1 -- \ > + set interface vif1 external-ids:iface-id=lp1 \ > + options:tx_pcap=hv1/vif1-tx.pcap \ > + options:rxq_pcap=hv1/vif1-rx.pcap > +ovs-vsctl -- add-port br-int-2 vif2 -- \ > + set interface vif2 external-ids:iface-id=lp2 \ > + options:tx_pcap=hv1/vif2-tx.pcap \ > + options:rxq_pcap=hv1/vif2-rx.pcap > + > +reset_env() { > + as hv1 reset_pcap_file vif1 hv1/vif1 > + as hv1 reset_pcap_file vif2 hv1/vif2 > + for port in hv1/vif1 hv1/vif2; do > + : > $port.expected > + done > +} > + > +check_packets() { > + OVN_CHECK_PACKETS_REMOVE_BROADCAST([hv1/vif1-tx.pcap], > [hv1/vif1.expected]) > + OVN_CHECK_PACKETS_REMOVE_BROADCAST([hv1/vif2-tx.pcap], > [hv1/vif2.expected]) > +} > + > +send_arp() { > + local hv=$1 inport=$2 eth_src=$3 eth_dst=$4 spa=$5 tpa=$6 > + local > request=${eth_dst}${eth_src}08060001080006040001${eth_src}${spa}${eth_dst}${tpa} > + as ${hv} ovs-appctl netdev-dummy/receive $inport $request > + echo "${request}" > +} > + > +wait_for_ports_up > +ovn-nbctl --wait=hv sync > + > +OVN_POPULATE_ARP > + > +reset_env > + > +lp1_spa=$(ip_to_hex 10 0 0 1) > +lp2_spa=$(ip_to_hex 10 0 0 2) > +request=$(send_arp hv1 vif1 000000000001 000000000002 $lp1_spa $lp2_spa) > +echo $request >> hv1/vif2.expected > +request=$(send_arp hv1 vif2 000000000002 000000000001 $lp2_spa $lp1_spa) > +echo $request >> hv1/vif1.expected > + > +check_packets > + > +OVN_CLEANUP([hv1]) > +AT_CLEANUP > +]) > -- > 2.34.1 > > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > Looks good to me, thanks. Reviewed-by: Ales Musil <amu...@redhat.com> -- Ales Musil Senior Software Engineer - OVN Core Red Hat EMEA <https://www.redhat.com> amu...@redhat.com IM: amusil <https://red.ht/sig> _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev