On Fri, May 19, 2023 at 12:09 AM Tony Liu <tonyliu0...@hotmail.com> wrote: > > Hi Numan, > > Provider VLAN networks is able to connect VM and BMS on L2. > I am going to push this topic further. > > Provider VLAN network is different from regular virtual network. > It seems that I can't create a logical router to connect a provider VLAN > and regular VN. The way I am using provider VLAN is as external network > whose GW is on physical router. Also in a multi-tenancy cloud, provider > VLAN network can't be created by user. I wonder if we can build a regular > VN to connect VM and BMS? > > OVN is using Geneve which is not commonly supported by networking devices. > VxLAN doesn't seem to be an option cause OVN needs Geneve to carry metadata. > I see some vxlan supports in OVN but not sure how it works or for which case > exactly. > > Tungsten Fabric supports this because it uses vxlan as the overlay. To > connect VM > to BMS, vrouter will create a vxlan from compute node to BMS VTEP (typically > the ToR). > That's how BMS is brought into overlay by vxlan, and will be treated just > like a VM. > With the EVPN support in control plane, routing info is populated between > vrouter > and VTEPand. And with some orchestration to networking devices, the networking > support to BMS is seamless. One concern is that no SG for BMS, which can be > actually supported by networking device. > > Can the similar supported by OVN or any other overlay solution supported by > OVN > to connect BMS? >
I think I should have asked this question earlier. What is BMS ? I presumed it to be Bare metal server and thought that you want to communicate a bare metal server on your L2 network and a VM in OVN logical switch with localnet port. OVN supports ovn-controller-vtep to connect OVN to a vtep switch. I don't have much experience there. Maybe you can check it out ? https://www.ovn.org/support/dist-docs/ovn-controller-vtep.8.html Adding @Vladislav Odintsov to the thread who has been using ovn-controller-vtep to connect to a vtep switch and if he has any comments. Thanks Numan > > Thanks! > Tony > ________________________________________ > From: Numan Siddique <num...@ovn.org> > Sent: May 18, 2023 11:18 AM > To: Tony Liu > Cc: ovs-dev; ovs-discuss > Subject: Re: [ovs-discuss] [ovs-dev] connect VM on OVN/OVS and BMS on L2 > > > > On Thu, May 18, 2023, 1:15 PM Tony Liu via discuss > <ovs-disc...@openvswitch.org<mailto:ovs-disc...@openvswitch.org>> wrote: > Hi Numan, > > Good to see you pick it up, no need to bother OpenStack alias. > My ultimate target is to support VM and BMS L2 connectivity with OpenStack. > I used to make that work with other virtual networking stack, not sure how > much > it's supported by OVN/OVS. Any comments in that context > > > It is definitely supported with open stack. > > I think you need to create a provider vlan neutron network. > > Thanks > Numan > > > Thanks! > Tony > ________________________________________ > From: Numan Siddique <num...@ovn.org<mailto:num...@ovn.org>> > Sent: May 18, 2023 09:51 AM > To: Tony Liu > Cc: ovs-discuss; ovs-dev > Subject: Re: [ovs-dev] connect VM on OVN/OVS and BMS on L2 > > On Thu, May 18, 2023 at 12:19 PM Tony Liu > <tonyliu0...@hotmail.com<mailto:tonyliu0...@hotmail.com>> wrote: > > > > Hi, > > > > Could you anyone share experiences or point to some reference about how > > to connect VM on OVN/OVS and BMS on L2? Or say, how can I connect BMS > > to a logical switch on OVN/OVS? > > For this you need to create a localnet port in the logical switch. > > Something like this: > > ovn-nbctl ls-add public > # localnet port > ovn-nbctl lsp-add public ln-public > ovn-nbctl lsp-set-type ln-public localnet > ovn-nbctl lsp-set-addresses ln-public unknown > ovn-nbctl lsp-set-options ln-public network_name=public > > # create a few VM ports > > ovn-nbctl lsp-add public pub-port1 > ovn-nbctl lsp-set-addresses pub-port1 "50:54:00:00:00:03 > 172.168.0.100" (assuming your L2 network is > 172.168.0.0/24<http://172.168.0.0/24>) > > ovn-nbctl lsp-add public pub-port2 > ovn-nbctl lsp-set-addresses pub-port2 "50:54:00:00:00:04 172.168.0.101" > > # On the compute node(s) where you create the VMs > > ovs-vsctl set open . external_ids:ovn-bridge-mappings="public:br-ex" > > ovs-vsctl add-br br-ex > ovs-vsctl add-port eth1 # assuming eth1 is your physical interface > connecting to your L2 switch > > After this connectivity from your VM (bound to logical port pub-port1) > should be able to communicate to your BMS. > > > Thanks > Numan > > > > > > > Thanks! > > Tony > > _______________________________________________ > > dev mailing list > > d...@openvswitch.org<mailto:d...@openvswitch.org> > > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > > _______________________________________________ > discuss mailing list > disc...@openvswitch.org<mailto:disc...@openvswitch.org> > https://mail.openvswitch.org/mailman/listinfo/ovs-discuss > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev _______________________________________________ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev
