This change adds a 'bgp-mirror' option to LRP that allows
mirroring of BGP control plane traffic to an arbitrary LSP
in its peer LS.

The option expects a string with a LSP name. When set,
any traffic entering LS that's destined for any of the
LRP's IP addresses (including IPv6 LLA) is redirected
to the LSP specified in the option's value.

This enables external BGP daemons to listen on an interface
bound to a LSP and effectively act as if they were listening
on (and speaking from) LRP's IP address.

Signed-off-by: Martin Kalcok <martin.kal...@canonical.com>
---
 northd/northd.c         | 87 +++++++++++++++++++++++++++++++++++++++++
 northd/ovn-northd.8.xml | 23 +++++++++++
 ovn-nb.xml              | 14 +++++++
 tests/ovn-northd.at     | 45 +++++++++++++++++++++
 tests/system-ovn.at     | 86 ++++++++++++++++++++++++++++++++++++++++
 5 files changed, 255 insertions(+)

diff --git a/northd/northd.c b/northd/northd.c
index 4353df07d..e07bf68cc 100644
--- a/northd/northd.c
+++ b/northd/northd.c
@@ -13048,6 +13048,92 @@ build_arp_resolve_flows_for_lrp(struct ovn_port *op,
     }
 }
 
+static void
+build_bgp_redirect_rule__(
+        const char *s_addr, const char *bgp_port_name, bool is_ipv6,
+        struct ovn_port *ls_peer, struct lflow_table *lflows,
+        struct ds *match, struct ds *actions)
+{
+    int ip_ver = is_ipv6 ? 6 : 4;
+    /* Redirect packets in the input pipeline destined for LR's IP to
+     * the port specified in 'bgp-mirror' option.
+     */
+    ds_clear(match);
+    ds_clear(actions);
+    ds_put_format(match, "ip%d.dst == %s && tcp.dst == 179", ip_ver, s_addr);
+    ds_put_format(actions, "outport = \"%s\"; output;", bgp_port_name);
+    ovn_lflow_add(lflows, ls_peer->od, S_SWITCH_IN_L2_LKUP, 100,
+                  ds_cstr(match),
+                  ds_cstr(actions),
+                  ls_peer->lflow_ref);
+
+
+    /* Drop any traffic originating from 'bgp-mirror' port that does
+     * not originate from BGP daemon port. This blocks unnecessary
+     * traffic like ARP broadcasts or IPv6 router solicitation packets
+     * from the dummy 'bgp-mirror' port.
+     */
+    ds_clear(match);
+    ds_put_format(match, "inport == \"%s\"", bgp_port_name);
+    ovn_lflow_add(lflows, ls_peer->od, S_SWITCH_IN_CHECK_PORT_SEC, 80,
+                  ds_cstr(match),
+                  REGBIT_PORT_SEC_DROP " = 1; next;",
+                  ls_peer->lflow_ref);
+
+    ds_put_format(match,
+                  " && ip%d.src == %s && tcp.src == 179",
+                  ip_ver,
+                  s_addr);
+    ovn_lflow_add(lflows, ls_peer->od, S_SWITCH_IN_CHECK_PORT_SEC, 81,
+                  ds_cstr(match),
+                  REGBIT_PORT_SEC_DROP " = check_in_port_sec(); next;",
+                  ls_peer->lflow_ref);
+}
+
+static void
+build_lrouter_bgp_redirect(
+        struct ovn_port *op, struct lflow_table *lflows,
+        struct ds *match, struct ds *actions)
+{
+    /* LRP has to have a peer.*/
+    if (op->peer == NULL) {
+        return;
+    }
+    /* LRP has to have NB record.*/
+    if (op->nbrp == NULL) {
+        return;
+    }
+
+    /* Proceed only for LRPs that have 'bgp-mirror' option set. Value of this
+     * option is the name of LSP to which a BGP traffic will be mirrored.
+     */
+    const char *bgp_port = smap_get(&op->nbrp->options, "bgp-mirror");
+    if (bgp_port == NULL) {
+        return;
+    }
+
+    if (op->cr_port != NULL) {
+        static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(1, 5);
+        VLOG_WARN_RL(&rl, "Option 'bgp-mirror' is not supported on"
+                          " Distributed Gateway Port '%s'", op->key);
+        return;
+    }
+
+    /* Mirror traffic destined for LRP's IPs and default BGP port
+     * to the port defined in 'bgp-mirror' option.
+     */
+    for (size_t i = 0; i < op->lrp_networks.n_ipv4_addrs; i++) {
+        const char *ip_s = op->lrp_networks.ipv4_addrs[i].addr_s;
+        build_bgp_redirect_rule__(ip_s, bgp_port, false,  op->peer, lflows,
+                                  match, actions);
+    }
+    for (size_t i = 0; i < op->lrp_networks.n_ipv6_addrs; i++) {
+        const char *ip_s = op->lrp_networks.ipv6_addrs[i].addr_s;
+        build_bgp_redirect_rule__(ip_s, bgp_port, true, op->peer, lflows,
+                                  match, actions);
+    }
+}
+
 /* This function adds ARP resolve flows related to a LSP. */
 static void
 build_arp_resolve_flows_for_lsp(
@@ -16003,6 +16089,7 @@ build_lswitch_and_lrouter_iterate_by_lrp(struct 
ovn_port *op,
                                 lsi->meter_groups, op->lflow_ref);
     build_lrouter_icmp_packet_toobig_admin_flows(op, lsi->lflows, &lsi->match,
                                                  &lsi->actions, op->lflow_ref);
+    build_lrouter_bgp_redirect(op, lsi->lflows, &lsi->match, &lsi->actions);
 }
 
 static void *
diff --git a/northd/ovn-northd.8.xml b/northd/ovn-northd.8.xml
index b06b09ac5..1bf9d2dc0 100644
--- a/northd/ovn-northd.8.xml
+++ b/northd/ovn-northd.8.xml
@@ -284,6 +284,21 @@
         dropped in the next stage.
       </li>
 
+      <li>
+        For each logical port that's defined as a target of BGP mirroring (via
+        <code>bgp-mirror</code> option set on Logical Router Port), a filter is
+        set in place that disallows any traffic entering this port that does
+        not originate from Logical Router Port's IPs and default BGP port (
+        TCP 179). This filtering is achieved by two rules. First rule has
+        priority 81, it matches on <code>inport == <var>BGP_MIRROR_PORT</var>
+        &amp;&amp; ip.src == <var>LRP_IP</var> &amp;&amp; tcp.src == 179</code>
+        and allows traffic further with <code>REGBIT_PORT_SEC_DROP" =
+        check_in_port_sec(); next;</code>. Second rule with priority 80 matches
+        the rest of the traffic from that port and sets
+        <code>REGBIT_PORT_SEC_DROP" = 1; next;"</code> so that the packets are
+        dropped in the next stage.
+      </li>
+
       <li>
         For each (enabled) vtep logical port, a priority 70 flow is added which
         matches on all packets and applies the action
@@ -1949,6 +1964,14 @@ output;
         on the logical switch.
       </li>
 
+      <li>
+        For any logical port that's defined as a target of BGP mirroring (via
+        <code>bgp-mirror</code> option set on Logical Router Port), a
+        priority-100 flow is added that redirects traffic for Logical Router
+        Port IPs (including IPv6 LLA) and TCP port 179, to the targeted
+        logical port.
+      </li>
+
       <li>
         Priority-90 flows for transit switches that forward registered
         IP multicast traffic to their corresponding multicast group , which
diff --git a/ovn-nb.xml b/ovn-nb.xml
index 9552534f6..44d3591db 100644
--- a/ovn-nb.xml
+++ b/ovn-nb.xml
@@ -3440,6 +3440,20 @@ or
         </p>
       </column>
 
+      <column name="options" key="bgp-mirror" type='{"type": "string"}'>
+        <p>
+          This option expects a name of a Logical Switch Port that's present
+          in the peer's Logical Switch. If set, it causes any traffic
+          that's destined for Logical Router Port's IP addresses (including
+          its IPv6 LLA) and the default BGP port (TCP 179), to be mirrored
+          to the specified Logical Switch Port.
+
+          This allows external BGP daemon to be bound to a port in OVN's
+          Logical Switch and act as if it was listening on Logical Router
+          Port's IP address.
+        </p>
+      </column>
+
       <column name="options" key="gateway_mtu_bypass">
         <p>
           When configured, represents a match expression, in the same
diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at
index a389d1988..0c58066f6 100644
--- a/tests/ovn-northd.at
+++ b/tests/ovn-northd.at
@@ -12721,3 +12721,48 @@ AT_CHECK([ovn-sbctl dump-flows lr | grep lr_in_dnat | 
ovn_strip_lflows], [0], [d
 
 AT_CLEANUP
 ])
+
+OVN_FOR_EACH_NORTHD_NO_HV([
+AT_SETUP([BGP control plane mirroring])
+ovn_start
+
+check ovn-sbctl chassis-add hv1 geneve 127.0.0.1
+
+check ovn-nbctl lr-add lr -- \
+    lrp-add lr lr-ls 02:ac:10:01:00:01 172.16.1.1/24
+check ovn-nbctl --wait=sb set logical_router lr options:chassis=hv1
+
+check ovn-nbctl ls-add ls -- \
+    lsp-add ls ls-lr -- \
+    lsp-set-type ls-lr router -- \
+    lsp-set-addresses ls-lr router -- \
+    lsp-set-options ls-lr router-port=lr-ls
+
+check ovn-nbctl lsp-add ls lsp-bgp -- \
+    lsp-set-addresses lsp-bgp unknown
+
+# By default, no rules related to BGP mirroring are present
+AT_CHECK([ovn-sbctl dump-flows ls | grep ls_in_l2_lkup  | grep "tcp.dst == 
179" | wc -l], [0], [0
+])
+
+AT_CHECK([ovn-sbctl dump-flows ls | grep ls_in_check_port_sec | grep -E 
"priority=80|priority=81" | wc -l], [0], [0
+])
+
+# Set "lsp-bgp" port as target of BGP control plane mirrored traffic
+check ovn-nbctl --wait=sb set logical_router_port lr-ls 
options:bgp-mirror=lsp-bgp
+
+# Check that BGP control plane traffic is redirected to "lsp-bgp"
+AT_CHECK([ovn-sbctl dump-flows ls | grep ls_in_l2_lkup | grep "tcp.dst == 179" 
| ovn_strip_lflows], [0], [dnl
+  table=??(ls_in_l2_lkup      ), priority=100  , match=(ip4.dst == 172.16.1.1 
&& tcp.dst == 179), action=(outport = "lsp-bgp"; output;)
+  table=??(ls_in_l2_lkup      ), priority=100  , match=(ip6.dst == 
fe80::ac:10ff:fe01:1 && tcp.dst == 179), action=(outport = "lsp-bgp"; output;)
+])
+
+# Check that only BGP-related traffic is accepted on "lsp-bgp" port
+AT_CHECK([ovn-sbctl dump-flows ls | grep ls_in_check_port_sec | grep -E 
"priority=80|priority=81" | ovn_strip_lflows], [0], [dnl
+  table=??(ls_in_check_port_sec), priority=80   , match=(inport == "lsp-bgp"), 
action=(reg0[[15]] = 1; next;)
+  table=??(ls_in_check_port_sec), priority=81   , match=(inport == "lsp-bgp" 
&& ip4.src == 172.16.1.1 && tcp.src == 179), action=(reg0[[15]] = 
check_in_port_sec(); next;)
+  table=??(ls_in_check_port_sec), priority=81   , match=(inport == "lsp-bgp" 
&& ip6.src == fe80::ac:10ff:fe01:1 && tcp.src == 179), action=(reg0[[15]] = 
check_in_port_sec(); next;)
+])
+
+AT_CLEANUP
+])
diff --git a/tests/system-ovn.at b/tests/system-ovn.at
index c24ede7c5..fbcb05e59 100644
--- a/tests/system-ovn.at
+++ b/tests/system-ovn.at
@@ -13027,3 +13027,89 @@ OVS_TRAFFIC_VSWITCHD_STOP(["/failed to query port 
patch-.*/d
 /connection dropped.*/d"])
 AT_CLEANUP
 ])
+
+OVN_FOR_EACH_NORTHD([
+AT_SETUP([BGP control plane mirroring])
+ovn_start
+OVS_TRAFFIC_VSWITCHD_START()
+
+ADD_BR([br-int])
+ADD_BR([br-ext])
+
+ovs-ofctl add-flow br-ext action=normal
+# Set external-ids in br-int needed for ovn-controller
+ovs-vsctl \
+        -- set Open_vSwitch . external-ids:system-id=hv1 \
+        -- set Open_vSwitch . 
external-ids:ovn-remote=unix:$ovs_base/ovn-sb/ovn-sb.sock \
+        -- set Open_vSwitch . external-ids:ovn-encap-type=geneve \
+        -- set Open_vSwitch . external-ids:ovn-encap-ip=169.0.0.1 \
+        -- set bridge br-int fail-mode=secure other-config:disable-in-band=true
+
+# Start ovn-controller
+start_daemon ovn-controller
+
+ovn-nbctl lr-add R1 \
+    -- set Logical_Router R1 options:chassis=hv1
+
+ovn-nbctl ls-add public
+
+ovn-nbctl lrp-add R1 rp-public 00:00:02:01:02:03 172.16.1.1/24
+
+ovn-nbctl lsp-add public public-rp -- set Logical_Switch_Port public-rp \
+    type=router options:router-port=rp-public \
+    -- lsp-set-addresses public-rp router
+
+ovn-nbctl lsp-add public bgp-daemon \
+    -- lsp-set-addresses bgp-daemon unknown
+
+AT_CHECK([ovs-vsctl set Open_vSwitch . 
external-ids:ovn-bridge-mappings=phynet:br-ext])
+ovn-nbctl lsp-add public public1 \
+        -- lsp-set-addresses public1 unknown \
+        -- lsp-set-type public1 localnet \
+        -- lsp-set-options public1 network_name=phynet
+
+ovn-nbctl --wait=hv sync
+
+# Set option that redirects BGP control plane traffic to a LSP "bgp-daemon"
+ovn-nbctl --wait=sb set logical_router_port rp-public 
options:bgp-mirror=bgp-daemon
+
+# Create "bgp-daemon" interface in a namespace with IP and MAC matching LRP 
"rp-public"
+ADD_NAMESPACES(bgp-daemon)
+ADD_VETH(bgp-daemon, bgp-daemon, br-int, "172.16.1.1/24", "00:00:02:01:02:03")
+
+ADD_NAMESPACES(ext-foo)
+ADD_VETH(ext-foo, ext-foo, br-ext, "172.16.1.100/24", "00:10:10:01:02:13", \
+         "172.16.1.1")
+
+# Flip the interface down/up to get proper IPv6 LLA
+NS_EXEC([bgp-daemon], [ip link set down bgp-daemon])
+NS_EXEC([bgp-daemon], [ip link set up bgp-daemon])
+
+# Wait until IPv6 LLA loses the "tentative" flag otherwise it can't be bound 
to.
+OVS_WAIT_UNTIL([NS_EXEC([bgp-daemon], [ip a show dev bgp-daemon | grep 
"fe80::" | grep -v tentative])])
+OVS_WAIT_UNTIL([NS_EXEC([ext-foo], [ip a show dev ext-foo | grep "fe80::" | 
grep -v tentative])])
+
+# Verify that BGP control plane traffic is delivered to the "bgp-daemon"
+# interface on both IPv4 and IPv6 LLA addresses
+NETNS_DAEMONIZE([bgp-daemon], [nc -l -k 172.16.1.1 179], [bgp_v4.pid])
+NS_CHECK_EXEC([ext-foo], [echo "TCP test" | nc --send-only 172.16.1.1 179])
+
+NETNS_DAEMONIZE([bgp-daemon], [nc -l -6 -k fe80::200:2ff:fe01:203%bgp-daemon 
179], [bgp_v6.pid])
+NS_CHECK_EXEC([ext-foo], [echo "TCP test" | nc --send-only -6 
fe80::200:2ff:fe01:203%ext-foo 179])
+
+OVS_APP_EXIT_AND_WAIT([ovn-controller])
+
+as ovn-sb
+OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+
+as ovn-nb
+OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+
+as northd
+OVS_APP_EXIT_AND_WAIT([ovn-northd])
+
+as
+OVS_TRAFFIC_VSWITCHD_STOP(["/.*error receiving.*/d
+/.*terminating with signal 15.*/d"])
+AT_CLEANUP
+])
-- 
2.40.1

_______________________________________________
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to