On 1/14/25 03:41, Ales Musil wrote:


On Mon, Dec 16, 2024 at 8:03 PM Mark Michelson <[email protected] <mailto:[email protected]>> wrote:

    This introduces a new southbound table called ACL_ID for storing
    persistent ACL conntrack IDs. These IDs are generated by ovn-northd for
    any ACL that is of type "allow-established".

    Signed-off-by: Mark Michelson <[email protected]
    <mailto:[email protected]>>
    ---


Hi Mark,

I have a few small comments down below.

    v2 -> v3:
      * Since there are now two factors that determine if an ACL should be
        synced to the SB DB, there is a helper function in en-acl-ids.c that
        can be used to tell if an ACL is a candidate for having an ID
    synced.

    v1 -> v2:
      * Formatting issues are fixed.
      * UUIDs of NB ACLs and SB ACL_IDs are the same.
      * There is no separate sync function. The incremental processing
        run function syncs the NB and SB data.
      * The engine node no longer needs to allocate data.

    Feedback not addressed in this version:
      * The bitmap_scan() code is unchanged. This is because a change
        in the next patch addresses the issue that Ales pointed out.
      * I did not add a comment around the ovsdb_idl_omit_alert() call
        because the comment at the top of the section already says
        what was suggested.
    ---
      northd/automake.mk <http://automake.mk>       |   2 +
      northd/en-acl-ids.c      | 104 +++++++++++++++++++++++++++++++++++++++
      northd/en-acl-ids.h      |  13 +++++
      northd/inc-proc-northd.c |  14 +++++-
      northd/northd.h          |   4 ++
      northd/ovn-northd.c      |   4 ++
      ovn-sb.ovsschema         |  12 +++--
      ovn-sb.xml               |  13 +++++
      tests/ovn.at <http://ovn.at>             |  40 +++++++++++++++
      9 files changed, 202 insertions(+), 4 deletions(-)
      create mode 100644 northd/en-acl-ids.c
      create mode 100644 northd/en-acl-ids.h

    diff --git a/northd/automake.mk <http://automake.mk>
    b/northd/automake.mk <http://automake.mk>
    index 6566ad299..d46dfd763 100644
    --- a/northd/automake.mk <http://automake.mk>
    +++ b/northd/automake.mk <http://automake.mk>
    @@ -34,6 +34,8 @@ northd_ovn_northd_SOURCES = \
             northd/en-ls-stateful.h \
             northd/en-sampling-app.c \
             northd/en-sampling-app.h \
    +       northd/en-acl-ids.c \
    +       northd/en-acl-ids.h \
             northd/inc-proc-northd.c \
             northd/inc-proc-northd.h \
             northd/ipam.c \
    diff --git a/northd/en-acl-ids.c b/northd/en-acl-ids.c
    new file mode 100644
    index 000000000..80c8a80cc
    --- /dev/null
    +++ b/northd/en-acl-ids.c
    @@ -0,0 +1,104 @@
    +/*
    + * Licensed under the Apache License, Version 2.0 (the "License");
    + * you may not use this file except in compliance with the License.
    + * You may obtain a copy of the License at:
    + *
    + * http://www.apache.org/licenses/LICENSE-2.0
    <http://www.apache.org/licenses/LICENSE-2.0>
    + *
    + * Unless required by applicable law or agreed to in writing, software
    + * distributed under the License is distributed on an "AS IS" BASIS,
    + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
    implied.
    + * See the License for the specific language governing permissions and
    + * limitations under the License.
    + */
    +
    +#include <config.h>
    +
    +#include "en-acl-ids.h"
    +#include "lib/uuidset.h"
    +#include "lib/ovn-sb-idl.h"
    +#include "lib/ovn-nb-idl.h"
    +#include "lib/bitmap.h"
    +
    +#include "openvswitch/vlog.h"
    +
    +VLOG_DEFINE_THIS_MODULE(northd_acl_ids);
    +
    +#define MAX_ACL_ID 65535
    +
    +void *
    +en_acl_id_init(struct engine_node *node OVS_UNUSED,
    +               struct engine_arg *arg OVS_UNUSED)
    +{
    +    return NULL;
    +}
    +
    +static bool
    +should_sync_to_sb(const struct nbrec_acl *nb_acl)
    +{
    +    return !strcmp(nb_acl->action, "allow-related") &&
    +           smap_get_bool(&nb_acl->options,
    +                         "bypass_match_for_established",
    +                         false);
    +}
    +
    +void
    +en_acl_id_run(struct engine_node *node, void *data OVS_UNUSED)
    +{
    +    const struct engine_context *eng_ctx = engine_get_context();
    +    if (!eng_ctx->ovnnb_idl_txn || !eng_ctx->ovnsb_idl_txn) {
    +        return;
    +    }


I'm pretty sure that the engine run can only happen if both idls are capable of writing.

    +
    +    const struct nbrec_acl_table *nb_acl_table =
    +        EN_OVSDB_GET(engine_get_input("NB_acl", node));
    +    const struct sbrec_acl_id_table *sb_acl_id_table =
    +        EN_OVSDB_GET(engine_get_input("SB_acl_id", node));
    +    struct uuidset visited = UUIDSET_INITIALIZER(&visited);
    +    unsigned long *id_bitmap = bitmap_allocate(MAX_ACL_ID);
    +
    +    const struct nbrec_acl *nb_acl;
    +    const struct sbrec_acl_id *sb_id;
    +    SBREC_ACL_ID_TABLE_FOR_EACH_SAFE (sb_id, sb_acl_id_table) {
    +        nb_acl = nbrec_acl_table_get_for_uuid(nb_acl_table,
    +                                              &sb_id->header_.uuid);
    +        if (nb_acl && should_sync_to_sb(nb_acl)) {
    +            bitmap_set1(id_bitmap, sb_id->id);
    +            uuidset_insert(&visited, &sb_id->header_.uuid);
    +        } else {
    +            sbrec_acl_id_delete(sb_id);
    +        }
    +    }
    +
    +    size_t scan_start = 1;
    +    size_t scan_end = MAX_ACL_ID;
    +    NBREC_ACL_TABLE_FOR_EACH (nb_acl, nb_acl_table) {
    +        if (uuidset_find_and_delete(&visited, &nb_acl->header_.uuid)) {
    +            continue;
    +        }
    +        if (!should_sync_to_sb(nb_acl)) {
    +            continue;
    +        }
    +        int64_t new_id = bitmap_scan(id_bitmap, 0,
    +                                     scan_start, scan_end + 1);
    +        if (new_id == scan_end + 1) {
    +            static struct vlog_rate_limit rl =
    VLOG_RATE_LIMIT_INIT(1, 1);
    +            VLOG_WARN_RL(&rl, "Exhausted all ACL IDs");
    +            break;
    +        }
    +        sb_id =
    sbrec_acl_id_insert_persist_uuid(eng_ctx->ovnsb_idl_txn,
+  &nb_acl->header_.uuid);
    +        sbrec_acl_id_set_id(sb_id, new_id);
    +        bitmap_set1(id_bitmap, new_id);
    +        scan_start = new_id + 1;
    +    }
    +
    +    engine_set_node_state(node, EN_UPDATED);
    +    uuidset_destroy(&visited);
    +    bitmap_free(id_bitmap);
    +}
    +
    +void
    +en_acl_id_cleanup(void *data OVS_UNUSED)
    +{
    +}
    diff --git a/northd/en-acl-ids.h b/northd/en-acl-ids.h
    new file mode 100644
    index 000000000..f878f55d9
    --- /dev/null
    +++ b/northd/en-acl-ids.h
    @@ -0,0 +1,13 @@
    +#ifndef EN_ACL_IDS_H
    +#define EN_ACL_IDS_H
    +
    +#include <config.h>
    +#include <stdbool.h>
    +
    +#include "lib/inc-proc-eng.h"
    +
    +bool northd_acl_id_handler(struct engine_node *node, void *data);
    +void *en_acl_id_init(struct engine_node *, struct engine_arg *);
    +void en_acl_id_run(struct engine_node *, void *data);
    +void en_acl_id_cleanup(void *data);
    +#endif
    diff --git a/northd/inc-proc-northd.c b/northd/inc-proc-northd.c
    index 6e0aa04c4..8025f1c28 100644
    --- a/northd/inc-proc-northd.c
    +++ b/northd/inc-proc-northd.c
    @@ -41,6 +41,7 @@
      #include "en-sampling-app.h"
      #include "en-sync-sb.h"
      #include "en-sync-from-sb.h"
    +#include "en-acl-ids.h"
      #include "unixctl.h"
      #include "util.h"

    @@ -102,7 +103,8 @@ static unixctl_cb_func chassis_features_list;
          SB_NODE(fdb, "fdb") \
          SB_NODE(static_mac_binding, "static_mac_binding") \
          SB_NODE(chassis_template_var, "chassis_template_var") \
    -    SB_NODE(logical_dp_group, "logical_dp_group")
    +    SB_NODE(logical_dp_group, "logical_dp_group") \
    +    SB_NODE(acl_id, "acl_id")

      enum sb_engine_node {
      #define SB_NODE(NAME, NAME_STR) SB_##NAME,
    @@ -161,6 +163,7 @@ static ENGINE_NODE(route_policies,
    "route_policies");
      static ENGINE_NODE(routes, "routes");
      static ENGINE_NODE(bfd, "bfd");
      static ENGINE_NODE(bfd_sync, "bfd_sync");
    +static ENGINE_NODE(acl_id, "acl_id");

      void inc_proc_northd_init(struct ovsdb_idl_loop *nb,
                                struct ovsdb_idl_loop *sb)
    @@ -186,6 +189,9 @@ void inc_proc_northd_init(struct ovsdb_idl_loop *nb,
                           global_config_sb_chassis_handler);
          engine_add_input(&en_global_config, &en_sampling_app, NULL);

    +    engine_add_input(&en_acl_id, &en_nb_acl, NULL);
    +    engine_add_input(&en_acl_id, &en_sb_acl_id, NULL);
    +
          engine_add_input(&en_northd, &en_nb_mirror, NULL);
          engine_add_input(&en_northd, &en_nb_static_mac_binding, NULL);
          engine_add_input(&en_northd, &en_nb_chassis_template_var, NULL);
    @@ -344,6 +350,7 @@ void inc_proc_northd_init(struct ovsdb_idl_loop *nb,
                           northd_output_mac_binding_aging_handler);
          engine_add_input(&en_northd_output, &en_fdb_aging,
                           northd_output_fdb_aging_handler);
    +    engine_add_input(&en_northd_output, &en_acl_id, NULL);

This should follow the convention and add a handler that just returns true.

Just so I understand, is this convention specifically used for direct inputs to the en_northd_output node? Is this to prevent unnecessary recomputes since en_northd_output is essentially a "dummy" node that everything eventually feeds into?

If so, then it also makes sense why you suggested a similar change in patch 4 for the new input to en_controller_output.



          struct engine_arg engine_arg = {
              .nb_idl = nb->idl,
    @@ -364,6 +371,8 @@ void inc_proc_northd_init(struct ovsdb_idl_loop *nb,
              = mac_binding_by_datapath_index_create(sb->idl);
          struct ovsdb_idl_index *fdb_by_dp_key =
              ovsdb_idl_index_create1(sb->idl, &sbrec_fdb_col_dp_key);
    +    struct ovsdb_idl_index *sbrec_acl_id_by_id =
    +        ovsdb_idl_index_create1(sb->idl, &sbrec_acl_id_col_id);


I don't see this index being used anywhere.


          engine_init(&en_northd_output, &engine_arg);

    @@ -388,6 +397,9 @@ void inc_proc_northd_init(struct ovsdb_idl_loop *nb,
          engine_ovsdb_node_add_index(&en_sb_fdb,
                                      "fdb_by_dp_key",
                                      fdb_by_dp_key);
    +    engine_ovsdb_node_add_index(&en_sb_acl_id,
    +                                "sbrec_acl_id_by_id",
    +                                sbrec_acl_id_by_id);

          struct ovsdb_idl_index *sbrec_address_set_by_name
              = ovsdb_idl_index_create1(sb->idl,
    &sbrec_address_set_col_name);
    diff --git a/northd/northd.h b/northd/northd.h
    index d60c944df..bccb1c5d8 100644
    --- a/northd/northd.h
    +++ b/northd/northd.h
    @@ -63,12 +63,16 @@ struct northd_input {
          struct eth_addr svc_monitor_mac_ea;
          const struct chassis_features *features;

    +    /* ACL ID inputs. */
    +    const struct acl_id_data *acl_id_data;
    +
          /* Indexes */
          struct ovsdb_idl_index *sbrec_chassis_by_name;
          struct ovsdb_idl_index *sbrec_chassis_by_hostname;
          struct ovsdb_idl_index *sbrec_ha_chassis_grp_by_name;
          struct ovsdb_idl_index *sbrec_ip_mcast_by_dp;
          struct ovsdb_idl_index *sbrec_fdb_by_dp_and_port;
    +    struct ovsdb_idl_index *sbrec_acl_id_by_id;
      };

      /* A collection of datapaths. E.g. all logical switch datapaths,
    or all
    diff --git a/northd/ovn-northd.c b/northd/ovn-northd.c
    index fb29c3c21..bbb321248 100644
    --- a/northd/ovn-northd.c
    +++ b/northd/ovn-northd.c
    @@ -896,6 +896,10 @@ main(int argc, char *argv[])
              ovsdb_idl_omit_alert(ovnsb_idl_loop.idl,
                                   &sbrec_logical_dp_group_columns[i]);
          }
    +    for (size_t i = 0; i < SBREC_ACL_ID_N_COLUMNS; i++) {
    +        ovsdb_idl_omit_alert(ovnsb_idl_loop.idl,
    +                             &sbrec_acl_id_columns[i]);
    +    }

          unixctl_command_register("sb-connection-status", "", 0, 0,
                                   ovn_conn_show, ovnsb_idl_loop.idl);
    diff --git a/ovn-sb.ovsschema b/ovn-sb.ovsschema
    index 73abf2c8d..ef7d28d82 100644
    --- a/ovn-sb.ovsschema
    +++ b/ovn-sb.ovsschema
    @@ -1,7 +1,7 @@
      {
          "name": "OVN_Southbound",
    -    "version": "20.37.0",
    -    "cksum": "1950136776 31493",
    +    "version": "20.38.0",
    +    "cksum": "3668645444 31756",
          "tables": {
              "SB_Global": {
                  "columns": {
    @@ -617,6 +617,12 @@
                          "type": {"key": "string", "value": "string",
                                   "min": 0, "max": "unlimited"}}},
                  "indexes": [["chassis"]],
    -            "isRoot": true}
    +            "isRoot": true},
    +       "ACL_ID": {
    +           "columns": {
    +               "id": {"type": {"key": {"type": "integer",
    +                                              "minInteger": 0,
    +                                              "maxInteger": 32767}}}},
    +           "isRoot": true}
          }
      }
    diff --git a/ovn-sb.xml b/ovn-sb.xml
    index ea4adc1c3..b4759f72c 100644
    --- a/ovn-sb.xml
    +++ b/ovn-sb.xml
    @@ -5217,4 +5217,17 @@ tcp.flags = RST;
            The set of variable values for a given chassis.
          </column>
        </table>
    +
    +  <table name="ACL_ID">
    +    <p>
    +      Each record represents an identifier that
    <code>ovn-northd</code> needs
    +      to synchronize with instances of <code>ovn-controller</code>.
    The UUID
    +      of each record corresponds directly with an <ref
    table="ACL"/> record
    +      in the northbound database.
    +    </p>
    +    <column name="id">
    +      An identifier corresponding to a northbound
    +      <code>allow-established</code> ACL.
    +    </column>
    +  </table>
      </database>
    diff --git a/tests/ovn.at <http://ovn.at> b/tests/ovn.at <http://ovn.at>
    index 2fdf1a88c..41524a2fc 100644
    --- a/tests/ovn.at <http://ovn.at>
    +++ b/tests/ovn.at <http://ovn.at>
    @@ -39761,3 +39761,43 @@ OVN_CLEANUP([hv1])

      AT_CLEANUP
      ])
    +
    +AT_SETUP([ACL Conntrack ID propagation])
    +ovn_start
    +
    +dnl In this test, we want to ensure that southbound ACL_ID
    +dnl entries are created for northbound ACLs of type "allow-related"
    +dnl when the "bypass_match_for_established" option is set to true.
    +dnl
    +dnl If an ACL is of a different type, does not have the option set
    +dnl to true, or is deleted, then there should be no soutbhound ACL_ID.
    +
    +check ovn-nbctl ls-add sw
    +check ovn-nbctl --wait=sb acl-add sw from-lport 1000 1 allow-related
    +acl_uuid=$(fetch_column nb:ACL _uuid priority=1000)
    +
    +dnl The ACL is not have the bypass option set, so SBDB should have
    no rows.
    +wait_row_count ACL_ID 0
    +
    +dnl When we set the option, the SBDB should pick it up.
    +check ovn-nbctl --wait=sb set ACL $acl_uuid
    options:bypass_match_for_established=true
    +
    +wait_row_count ACL_ID 1
    +
    +dnl Setting to a new action should remove the row from the SBDB.
    +check ovn-nbctl --wait=sb set ACL $acl_uuid action=drop
    +
    +wait_row_count ACL_ID 0
    +
    +dnl Set back to allow-related and make sure it shows up in the SBDB.
    +check ovn-nbctl --wait=sb set ACL $acl_uuid action=allow-related
    +
    +wait_row_count ACL_ID 1
    +
    +dnl Delete the ACL and ensure the SBDB entry is deleted.
    +check ovn-nbctl --wait=sb acl-del sw from-lport 1000 1
    +
    +wait_row_count ACL_ID 0
    +
    +AT_CLEANUP
    +])
-- 2.45.2

    _______________________________________________
    dev mailing list
    [email protected] <mailto:[email protected]>
    https://mail.openvswitch.org/mailman/listinfo/ovs-dev
    <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>


Thanks,
Ales

_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to