Got it. I'll try it. Ethan
Ben Pfaff <b...@ovn.org> 於 2017年4月19日 週三 上午2:08寫道: > I guess that if you know these kinds of specific properties of your > network, then perhaps you should disable in-band control and add your > own control flows. > > On Tue, Apr 18, 2017 at 05:31:37PM +0000, 蘇于倫 wrote: > > Thanks, Ben! > > > > In case of the last email content is hidden, I re-send the question again > > here: > > > > If I set the action of in-band hidden flows to be output: OFPP_PORT_X > with > > X being the port number: 1, 2 or 3, etc, > > which are defined in openflow-1.0.h. Does it make sense to direct all > > in-band packet through the specified port X ? > > > > Ethan > > > > 蘇于倫 <yulunsu.eed...@g2.nctu.edu.tw> 於 2017年4月19日 週三 上午1:02寫道: > > > > > Thanks Ben! > > > > > > Besides, if I set the action of in-band hidden flows to be > > > output:OFPP_PORT_X > > > with X is port number, 1, 2, 3, etc, which are defined in > openflow-1.0.h, > > > could it make sense to direct all control plane packets through the > > > specific port X ? > > > > > > Ethan > > > > > > Ben Pfaff <b...@ovn.org> 於 2017年4月19日 週三 上午12:55寫道: > > > > > >> It's the MAC learning table. > > >> > > >> On Wed, Apr 19, 2017 at 12:00:22AM +0800, 蘇于倫 wrote: > > >> > Hi Ben, > > >> > > > >> > I'd like to know what info does ovs-appctl fdb/show <bridge> > provide? > > >> > > > >> > Ethan > > >> > > > >> > 2017年4月18日 23:42,"Ben Pfaff" <b...@ovn.org>寫道: > > >> > > > >> > > Maybe you want to look at the in-band control flow rules via > > >> > > "bridge/dump-flows". See ovs-vswitchd(8). > > >> > > > > >> > > On Tue, Apr 18, 2017 at 03:34:24PM +0000, 蘇于倫 wrote: > > >> > > > Hi Ben, > > >> > > > > > >> > > > 1: eth0 addr:00:0c:29:15:f5:f6 > > >> > > > 2: eth1 addr:00:0c:29:15:f5:00 > > >> > > > > > >> > > > Ethan > > >> > > > > > >> > > > Ben Pfaff <b...@ovn.org> 於 2017年4月18日 週二 下午11:28寫道: > > >> > > > > > >> > > > > On Tue, Apr 18, 2017 at 03:21:23PM +0000, 蘇于倫 wrote: > > >> > > > > > I'd like to know if we can see which ports the OVS is using > to > > >> > > connect to > > >> > > > > > controller in "in-band" mode? > > >> > > > > > > >> > > > > Whatever ports you configured? > > >> > > > > > > >> > > > > >> > > > >
_______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss