Hi Devendra Could you please respond to Kevin’s query just to be sure ?
Were you able to confirm those addresses by running ./dpdk-devbind.py -s in your <dpdk_src>/tools dir? Thanks Darrell On 9/7/17, 11:54 AM, "Kevin Traynor" <ktray...@redhat.com> wrote: On 09/07/2017 06:47 PM, Darrell Ball wrote: > Adding disc...@openvswitch.org > > The related changes went into 2.7 > > > > On 9/7/17, 3:51 AM, "ovs-dev-boun...@openvswitch.org on behalf of devendra rawat" <ovs-dev-boun...@openvswitch.org on behalf of devendra.rawat.si...@gmail.com> wrote: > > Hi, > > I have compiled and built ovs-dpdk using DPDK v17.08 and OVS v2.8.0. The > NIC that I am using is Mellanox ConnectX-3 Pro, which is a dual port 10G > NIC. The problem with this NIC is that it provides only one PCI address for > both the 10G ports. > > So when I am trying to add the two DPDK ports to my br0 bridge > > # ovs-vsctl --no-wait add-port br0 dpdk0 -- set Interface dpdk0 type=dpdk > options:dpdk-devargs=0002:01:00.0 > > # ovs-vsctl --no-wait add-port br0 dpdk1 -- set Interface dpdk1 type=dpdk > options:dpdk-devargs=0002:01:00.0 > Were you able to confirm those addresses by running ./dpdk-devbind.py -s in your <dpdk_src>/tools dir? > The port dpdk1 is added successfully and able to transfer data, but adding > dpdk0 to br0 fails: > > 2017-09-06T14:19:20Z|00045|netdev_dpdk|INFO|Port 0: e4:1d:2d:4f:78:60 > 2017-09-06T14:19:20Z|00046|bridge|INFO|bridge br0: added interface dpdk1 on > port 1 > 2017-09-06T14:19:20Z|00047|bridge|INFO|bridge br0: added interface br0 on > port 65534 > 2017-09-06T14:19:20Z|00048|dpif_netlink|WARN|Generic Netlink family > 'ovs_datapath' does not exist. The Open vSwitch kernel module is probably > not loaded. > 2017-09-06T14:19:20Z|00049|netdev_dpdk|WARN|'dpdk0' is trying to use device > '0002:01:00.0' which is already in use by 'dpdk1' > 2017-09-06T14:19:20Z|00050|netdev|WARN|dpdk0: could not set configuration > (Address already in use) > 2017-09-06T14:19:20Z|00051|bridge|INFO|bridge br0: using datapath ID > 0000e41d2d4f7860 > > > With OVS v2.6.1 I never had this problem as dpdk-devargs was not mandatory > and just specifying port name was enough to add that port to bridge. > > Is there a way to add port both ports to bridge ? > > Thanks, > Devendra > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://urldefense.proofpoint.com/v2/url?u=https-3A__mail.openvswitch.org_mailman_listinfo_ovs-2Ddev&d=DwICAg&c=uilaK90D4TOVoH58JNXRgQ&r=BVhFA09CGX7JQ5Ih-uZnsw&m=qO7NdgrrorJhievOguQLmsfEFuBcPfz9NfQX7UME1-8&s=ZKHbYlaTjm8VFj6Rggmcb2gw6s3xW4PxEtUy4YFG1VA&e= > > > _______________________________________________ > dev mailing list > d...@openvswitch.org > https://urldefense.proofpoint.com/v2/url?u=https-3A__mail.openvswitch.org_mailman_listinfo_ovs-2Ddev&d=DwIC-g&c=uilaK90D4TOVoH58JNXRgQ&r=BVhFA09CGX7JQ5Ih-uZnsw&m=SP7c06xdDYsw8FYR-HyGtqE-hTmP0KUKiWhLr-NeyyI&s=2XcodWmzbMnU56fFummQJpM1PtAlwKe-TrNfrtmomH4&e= > _______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss