hi
we have tried on that. e.g. if we set to 0x22, we still only able to
see 2 cpu is in 100%, why?
# ovs-vsctl get Open_vSwitch . other_config
{dpdk-init="true", n-dpdk-rxqs="2", pmd-cpu-mask="0x22"}
Sep 22 22:54:29 host1 ovs-vswitchd[3504]:
ovs|00196|netdev_dpdk|WARN|Failed to enable flow control on device 0
Sep 22 22:54:29 host1 ovs-vswitchd[3504]:
ovs|00197|dpif_netdev|INFO|PMD thread on numa_id: 0, core id: 2
destroyed.
Sep 22 22:54:29 host1 ovs-vswitchd[3504]:
ovs|00198|dpif_netdev|INFO|PMD thread on numa_id: 0, core id: 5
created.
Sep 22 22:54:29 host1 ovs-vswitchd[3504]:
ovs|00199|dpif_netdev|INFO|There are 2 pmd threads on numa node 0
On Wed, Sep 20, 2017 at 8:59 PM, Flavio Leitner <f...@sysclose.org> wrote:
> On Wed, 20 Sep 2017 09:13:55 +0800
> Sun Paul <paul...@gmail.com> wrote:
>
>> sorry about that
>>
>> # ovs-vsctl get Open_vSwitch . other_config
>> {dpdk-init="true", n-dpdk-rxqs="2", pmd-cpu-mask="0x6"}
>
> Have you tried to change pmd-cpu-mask? Because that is mask of bits
> representing the CPUs you allow PMDs to be created. In this case,
> you are saying '0x6' (binary mask: 0110), so only two CPUs.
>
> Also check ovs-vswitchd.conf.db(5) man-page:
>
> other_config : pmd-cpu-mask: optional string
> Specifies CPU mask for setting the cpu affinity of PMD (Poll
> Mode
> Driver) threads. Value should be in the form of hex string,
> similar
> to the dpdk EAL ’-c COREMASK’ option input or the ’taskset’
> mask
> input.
>
> The lowest order bit corresponds to the first CPU core. A set
> bit
> means the corresponding core is available and a pmd thread
> will be
> created and pinned to it. If the input does not cover all
> cores,
> those uncovered cores are considered not set.
>
> If not specified, one pmd thread will be created for each numa
> node
> and pinned to any available core on the numa node by default.
>
> fbl
>
>>
>> On Tue, Sep 19, 2017 at 8:02 PM, Flavio Leitner <f...@sysclose.org> wrote:
>> > On Tue, 19 Sep 2017 13:43:25 +0800
>> > Sun Paul <paul...@gmail.com> wrote:
>> >
>> >> Hi
>> >>
>> >> below is the output. currently, I am only able to set to use two CPU for
>> >> PMD.
>> >
>> >
>> > I was referring to the output of
>> > ovs-vsctl get Open_vSwitch . other_config
>> >
>> > fbl
>> >
>> >>
>> >> # ovs-vsctl show
>> >> ea7f2b40-b7b3-4f11-a81f-cf25a56f8172
>> >> Bridge "gtp1"
>> >> Port "dpdk0"
>> >> Interface "dpdk0"
>> >> type: dpdk
>> >> options: {dpdk-devargs="0000:04:00.2", n_rxq="4"}
>> >> Port "gtp1"
>> >> Interface "gtp1"
>> >> type: internal
>> >> Port "dpdk1"
>> >> Interface "dpdk1"
>> >> type: dpdk
>> >> options: {dpdk-devargs="0000:04:00.3", n_rxq="4"}
>> >>
>> >>
>> >>
>> >> On Tue, Sep 19, 2017 at 4:09 AM, Flavio Leitner <f...@sysclose.org> wrote:
>> >> > On Mon, 18 Sep 2017 16:51:33 +0800
>> >> > Sun Paul <paul...@gmail.com> wrote:
>> >> >
>> >> >> Hi
>> >> >>
>> >> >> I have two interfaces mapped to DPDK, and run the OVS on top of it. I
>> >> >> tried to set the cpu mask, but I cannot only allocate more than 2 CPU
>> >> >> for pmd thread. any idea?
>> >> >>
>> >> >> # /usr/local/bin/ovs-appctl dpif-netdev/pmd-rxq-show
>> >> >> pmd thread numa_id 0 core_id 1:
>> >> >> isolated : false
>> >> >> port: dpdk0 queue-id: 0
>> >> >> pmd thread numa_id 0 core_id 2:
>> >> >> isolated : false
>> >> >> port: dpdk1 queue-id: 0
>> >> >
>> >> > Could you post the DPDK configuration and what do you want?
>> >> >
>> >> > Thanks,
>> >> > --
>> >> > Flavio
>> >> >
>> >
>> >
>> >
>> > --
>> > Flavio
>> >
>
>
>
> --
> Flavio
>
_______________________________________________
discuss mailing list
disc...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
