Yup thanks we are unblocked!
- Amar
On 12/6/17, 12:36 PM, "Ben Pfaff" <b...@ovn.org> wrote:
OK.
In the meantime, you can add "eth()" to the flows you're tracing to get
the expected results.
On Wed, Dec 06, 2017 at 07:02:42PM +0000, Amar Padmanabhan wrote:
> Thanks Ben for taking a look,
> Regards,
> - Amar
>
> On 12/6/17, 10:17 AM, "Ben Pfaff" <b...@ovn.org> wrote:
>
> On Wed, Dec 06, 2017 at 05:58:41AM +0000, Amar Padmanabhan wrote:
> > We are debugging a setup and are seeing something that we are
finding it hard to explain.
> >
> > 1 - Here is the ovs-dpctl dump-flows output.
> >
recirc_id(0),in_port(3),eth_type(0x0800),ipv4(dst=192.168.128.0/255.255.255.0,frag=no),
packets:550, bytes:53900, used:0.364s,
actions:userspace(pid=3276048382,slow_path(controller))
>
> OK, the above datapath flow just says that packets in this flow have
to
> be handled in the userspace slow path because
>
> > 2 - We are now trying to trace this flow and are not seeing the
output to controller flow getting hit in the trace.
> > sudo ovs-appctl ofproto/trace
"in_port(3),eth_type(0x0800),ipv4(dst=192.168.128.0/255.255.255.0,frag=no)"
> > Flow:
packet_type=(1,0x800),in_port=32770,nw_src=0.0.0.0,nw_dst=192.168.128.0,nw_proto=0,nw_tos=0,nw_ecn=0,nw_ttl=0
> > bridge("gtp_br0")
> > -----------------
> > 0. priority 0 resubmit(,1)
> > 1. in_port=32770, priority 10 set_field:0->metadata resubmit(,2)
> > 2. priority 0 resubmit(,3)
> > 3. No match. drop Final flow: unchanged Megaflow:
recirc_id=0,packet_type=(1,0x800),in_port=32770,nw_frag=no Datapath actions:
drop ---> Why isn’t the output to controller flow getting hit?
> >
> >
> > 3 - We are also seeing the flow counts go up for the output to
controller flow per the ofctl dump-flows output (pasting relevant flows)
> >
> > NXST_FLOW reply (xid=0x4): cookie=0x0, duration=1482.245s, table=0,
n_packets=1408, n_bytes=148464, idle_age=1, priority=0 actions=resubmit(,1)
> > cookie=0x0, duration=1482.244s, table=1, n_packets=1283,
n_bytes=123662, idle_age=1, priority=10,in_port=32770
actions=set_field:0->metadata,resubmit(,2)
> > cookie=0x0, duration=1482.244s, table=2, n_packets=1247,
n_bytes=122150, idle_age=1, priority=0 actions=resubmit(,3)
> > cookie=0x0, duration=1482.245s, table=3, n_packets=1245,
n_bytes=122010, idle_age=1, priority=0,ip,metadata=0,nw_dst=192.168.128.0/24
actions=CONTROLLER:65535 ---> Notice that this is getting hit as well
>
> OK, I spent a few minutes to mock up your environment (thanks for all
> the details!) and experiment. It looks like the problem is actually a
> mismatch between the formatting and parsing code for datapath flows.
If
> I run:
>
> ovs-appctl ofproto/trace
"in_port(3),eth(),eth_type(0x0800),ipv4(dst=192.168.128.0/255.255.255.0,frag=no)"
>
> that is, add "eth()" to the datapath flow, then I get the expected
> results:
>
> $ ovs-appctl ofproto/trace
"in_port(1),eth(),eth_type(0x0800),ipv4(dst=192.168.128.0/255.255.255.0,frag=no)"
> Flow:
ip,in_port=32770,vlan_tci=0x0000,dl_src=00:00:00:00:00:00,dl_dst=00:00:00:00:00:00,nw_src=0.0.0.0,nw_dst=192.168.128.0,nw_proto=0,nw_tos=0,nw_ecn=0,nw_ttl=0
>
> bridge("br0")
> -------------
> 0. priority 0
> resubmit(,1)
> 1. in_port=32770, priority 10
> load:0->OXM_OF_METADATA[]
> resubmit(,2)
> 2. priority 0
> resubmit(,3)
> 3. ip,metadata=0,nw_dst=192.168.128.0/24, priority 0
> CONTROLLER:65535
>
> Final flow: unchanged
> Megaflow:
recirc_id=0,eth,ip,in_port=32770,nw_dst=192.168.128.0/24,nw_frag=no
> Datapath actions: drop
> This flow is handled by the userspace slow path because it:
> - Sends "packet-in" messages to the OpenFlow controller.
>
> Clearly that's a bug. I'll see what I can do about it.
>
> > Also, Whoever improved the output of ofproto/trace thanks a ton!
>
> That was me :-) You're welcome.
>
>
_______________________________________________
discuss mailing list
disc...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
