Hi Steven, Could you please dump the “ip route” table of kernel on the host ? I am suspecting if gateway configuration (10.80.180.1) on kitbr0 is causing an issue. Can you try removing the gateway configuration and verify again ?
Warm Regards, Vishal Ajmera From: ovs-discuss-boun...@openvswitch.org [mailto:ovs-discuss-boun...@openvswitch.org] On Behalf Of Steven Pollock Sent: Thursday, January 04, 2018 11:21 AM To: ovs-discuss@openvswitch.org Subject: [ovs-discuss] Bridge not working.. Hopefully this is the correct mailing list, there is no description on the admin page. Running on Ubuntu 16.04 on top of vmware. ens192 is connect to the 10.80.180.0/24<http://10.80.180.0/24> network ens224 is connected to a standard vswitch4, and a windows machine is also connected to vswitch4 I expected packets from the windows machine 10.80.180.222 to pass through kitbr0 to any devices on the 10.80.180.0/24<http://10.80.180.0/24> network connected on ens192 Here is the /etc/network/interfaces auto ens192 iface ens192 inet manual auto ens224 iface ens224 inet manual auto kitbr0 allow-ovs kitbr0 iface kitbr0 inet static address 10.80.180.223 netmask 255.255.255.0 gateway 10.80.180.1 ovs_type OVSBridge ovs_ports ens192 ens224 I also note that the mac address on the bridge and ens224 are the same. The windows machine off ens224 can ping the bridge at 10.80.180.223 The devices off ens192 (the rest of the 10.80.180.x network) cannot ping 10.80.180.223 however ens192 Link encap:Ethernet HWaddr 00:50:56:ab:e2:5b inet6 addr: fe80::250:56ff:feab:e25b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:74 errors:0 dropped:0 overruns:0 frame:0 TX packets:369 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4964 (4.9 KB) TX bytes:35695 (35.6 KB) ens224 Link encap:Ethernet HWaddr 00:50:56:ab:46:85 inet6 addr: fe80::250:56ff:feab:4685/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:289 errors:0 dropped:0 overruns:0 frame:0 TX packets:166 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26138 (26.1 KB) TX bytes:15431 (15.4 KB) kitbr0 Link encap:Ethernet HWaddr 00:50:56:ab:46:85 inet addr:10.80.180.223 Bcast:10.80.180.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:feab:4685/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:349 errors:0 dropped:37 overruns:0 frame:0 TX packets:96 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:25386 (25.3 KB) TX bytes:10749 (10.7 KB) root@ovs:/etc/network# ovs-vsctl show 3a6b26a7-6e7a-44fd-8893-65f2c8fac4f2 Bridge "kitbr0" Port "kitbr0" Interface "kitbr0" type: internal Port "ens192" Interface "ens192" Port "ens224" Interface "ens224" ovs_version: "2.5.2" Any clues about what is going are much appreciated. (I do not have a controller at this time) thanks, -Steve
_______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss