Hi Jan, Thanks sharing the information. For my use case, i cant run a secondary VM, so need to look for DPDK ring port option.
I didn't find much information on how to use a DPDK ring port to connect two Bridges. i have added a dpdkr0 to a dpdk bridge, but not sure how to connect it to another bridge. Can you please share light on how to connect two bridges using DPDK ring ports. On Wed, Feb 14, 2018 at 1:41 PM, Jan Scheurich <jan.scheur...@ericsson.com> wrote: > Hi Kapil, > > > > I am afraid there is no really efficient way today to connect a user-space > (netdev-dpdk) datapath in OVS to kernel interfaces (such as internal/tap > ports or veth pairs) today. Communication works but packet I/O is very > slow compared to DPDK interfaces (both ethernet and vhostuser). The PMD > threads polling the DPDK interfaces are heavily slowed down when sending > packets to kernel ports and in the other direction all kernel interfaces > are polled by the main ovs-vswitchd thread. > > > > If your other bridge also uses DPDK in user space, you can try with DPDK > ring ports as interface between the two bridges. DPDK ring ports should be > supported in OVS. > > > > Another almost as efficient solution for sending packets from the OVS DPDK > datapath to another DPDK vSwitch would be to run the other vSwitch in a VM > and connect it to OVS-DPDK on the host through a vhostuser port. The DPDK > vSwitch in the VM would then use the virtio PMD, I expect this to be > supported by all DPDK vSwitches. > > > > BR, Jan > > > > *From:* Kapil A [mailto:kapil20...@gmail.com] > *Sent:* Wednesday, 14 February, 2018 03:47 > *To:* Jan Scheurich <jan.scheur...@ericsson.com> > *Cc:* disc...@openvswitch.org; d...@openvswitch.org > *Subject:* Re: [ovs-dev] DPDK: How to send packets from one OVS bridge to > another OVS bridge while running in the same user space ? > > > > Hi Jan, > > Thanks for the clarification. I also came across patch port as the best > option between ovs Bridges. But, is it possible to use patch ports to an > external OpenFlow bridge? Like one bridge is OVS, other is Lagopus bridge > or LINC bridge? For my use case, I want to send packets from OVS Bridge to > another OpenFlow bridge(like a loopback port) as OVS doesn't support the > functionality I am looking for. > > > > On Tue, Feb 13, 2018, 21:22 Jan Scheurich <jan.scheur...@ericsson.com> > wrote: > > Hi Kapil, > > This is what patch ports are for. They are only traversed for the first > packet of a flow in the slow path. The resulting datapath flow entry > collapses the processing in both bridges into a single megaflow. So there > is no performance overhead compared to having a single bridge. > > Regards, Jan > > > -----Original Message----- > > From: ovs-dev-boun...@openvswitch.org [mailto:ovs-dev-bounces@ > openvswitch.org] On Behalf Of Kapil A > > Sent: Tuesday, 13 February, 2018 16:44 > > To: disc...@openvswitch.org; d...@openvswitch.org > > Subject: [ovs-dev] DPDK: How to send packets from one OVS bridge to > another OVS bridge while running in the same user space ? > > > > Hello, > > > > In my setup, i have two DPDK ports, where dpdk0 is part of br0 and and > > dpdk1 is part of br1. How can i send packets from br0 to br1 in an > > efficient way within userspace with good performance? > > I came across, veth pair as one option, but i couldn't find if it will > > provide good performance in userspace while running in dpdk mode ? > > > > My query might sound odd, but i have a use case where i need to send the > > packets across bridges within the same userspace, so appreciate some help > > on this. > > > > Regards > > Kapil > > _______________________________________________ > > dev mailing list > > d...@openvswitch.org > > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > > > -- > > Regards > Kapil >
_______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss