On Thu, Mar 01, 2018 at 02:16:39PM +0000, Soliman Awad Alshra´a Abdullah TU Ilmenau wrote: > Hello everyone, > > > I am trying to build my topology with In-band controller, So I started > running some available script > > On the one hand, I have no problem when I use these instructions on > > > http://tocai.dia.uniroma3.it/compunet-wiki/index.php/In-band_control_with_Open_vSwitch > > (sudo mn --topo linear,5 --switch ovsk,inband=True, > --controller=remote,ip=10.0.0.3) > > when I check the disable-in-band="true" by > ( sudo ovs-vsctl --columns=other_config list bridge | grep "disable-in-band") > > I get nothing as it is expected, and I can run the topology well. (pingall) > ________________________________________ > > On the other hand, when I use the other topologies in (for example) > > https://techandtrains.com/2013/10/05/in-band-controller-with-mininet-p art-2/ > or > https://github.com/hmd1st/mn_test/blob/master/inband_delay_link.py > > I check the disable-in-band="true" > I get --> other_config : {datapath-id="0000000000000001", > disable-in-band="true"} > > OVS switches does not seem to try to connect to Ryu's host and I can't do > ping betwwen all hosts. > my ovs is 2.0.2 which support Of 1.0 as default so I uses simple_switch.py > as a controller as well sa I upgraded my ovs and tried to use the suitable > controller( simple_switch_13.py ), but nothing happens. > > > I know my problem might be simple, but I have no idea why I cannot start up > the controller well. > > please, Could you guide me to my problem !
Well, in general, you can't expect an in-band controller to work if you disable in-band controllers. But OVS 2.0 is over 4 years old and you can't really expect us to support it anyway. _______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss