On Sat, Mar 17, 2018 at 08:11:48PM -0400, Sh j wrote: > Hello everyone, > > I configured two OVSs as follows, > > OVS1(eth0) ------- (eth0)OVS2 > > ovs-vsctl add-br brx > ovs-vsctl add-port brx ethx > ip addr flush dev ethx > ip addr add 10.0.0.x/16 dev brx > ip link set brx up > > Then I set them to connect to a controller as follows, > ovs-vsctl set-controller brx tcp:.... > > > When I check the discovered topology in the controller, 10.0.0.X addresses > are recognized as hosts connected to OVSs and the MAC address of the OVSs > are considered as MAC address for hosts. > > However, in this case, I do not want to have any hosts, I just want to > configure OVSs to see how they can forward packets between themselves. > > Could you help me with this issue?
If you don't want the bridges to have IP addresses, then don't assign them any. _______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss