In that case, I can use set-connection to set one row.
Thanks! Tony > -----Original Message----- > From: Han Zhou <hz...@ovn.org> > Sent: Tuesday, August 4, 2020 4:44 PM > To: Tony Liu <tonyliu0...@hotmail.com> > Cc: Numan Siddique <num...@ovn.org>; Han Zhou <hz...@ovn.org>; ovs- > discuss <ovs-discuss@openvswitch.org>; ovs-dev <ovs-...@openvswitch.org> > Subject: Re: [ovs-discuss] [OVN] no response to inactivity probe > > > > On Tue, Aug 4, 2020 at 2:50 PM Tony Liu <tonyliu0...@hotmail.com > <mailto:tonyliu0...@hotmail.com> > wrote: > > > Hi, > > Since I have 3 OVN DB nodes, should I add 3 rows in connection > table > for the inactivity_probe? Or put 3 addresses into one row? > > "set-connection" set one row only, and there is no "add-connection". > How should I add 3 rows into the table connection? > > > > > You only need to set one row. Try this command: > > ovn-nbctl -- --id=@conn_uuid create Connection > target="ptcp\:6641\:0.0.0.0" inactivity_probe=0 -- set NB_Global . > connections=@conn_uuid > > > > Thanks! > > Tony > > > -----Original Message----- > > From: Numan Siddique <num...@ovn.org <mailto:num...@ovn.org> > > > Sent: Tuesday, August 4, 2020 12:36 AM > > To: Tony Liu <tonyliu0...@hotmail.com > <mailto:tonyliu0...@hotmail.com> > > > Cc: ovs-discuss <ovs-discuss@openvswitch.org <mailto:ovs- > disc...@openvswitch.org> >; ovs-dev <ovs- > > d...@openvswitch.org <mailto:d...@openvswitch.org> > > > Subject: Re: [ovs-discuss] [OVN] no response to inactivity probe > > > > > > > > On Tue, Aug 4, 2020 at 9:12 AM Tony Liu <tonyliu0...@hotmail.com > <mailto:tonyliu0...@hotmail.com> > > <mailto:tonyliu0...@hotmail.com > <mailto:tonyliu0...@hotmail.com> > > wrote: > > > > > > In my deployment, on each Neutron server, there are 13 > Neutron > > server processes. > > I see 12 of them (monitor, maintenance, RPC, API) connect > to both > > ovn-nb-db > > and ovn-sb-db. With 3 Neutron server nodes, that's 36 OVSDB > clients. > > Is so many clients OK? > > > > Any suggestions how to figure out which side doesn't > respond the > > probe, > > if it's bi-directional? I don't see any activities from > logging, > > other than > > connect/drop and reconnect... > > > > BTW, please let me know if this is not the right place to > discuss > > Neutron OVN > > ML2 driver. > > > > > > Thanks! > > > > Tony > > > > > -----Original Message----- > > > From: dev <ovs-dev-boun...@openvswitch.org <mailto:ovs- > dev-boun...@openvswitch.org> <mailto:ovs-dev- <mailto:ovs-dev-> > > boun...@openvswitch.org <mailto:boun...@openvswitch.org> > > On > Behalf Of Tony Liu > > > Sent: Monday, August 3, 2020 7:45 PM > > > To: ovs-discuss <ovs-discuss@openvswitch.org <mailto:ovs- > disc...@openvswitch.org> <mailto:ovs- <mailto:ovs-> > > disc...@openvswitch.org <mailto:disc...@openvswitch.org> > >; > ovs-dev <ovs- > > > d...@openvswitch.org <mailto:d...@openvswitch.org> > <mailto:d...@openvswitch.org <mailto:d...@openvswitch.org> > > > > > Subject: [ovs-dev] [OVN] no response to inactivity probe > > > > > > Hi, > > > > > > Neutron OVN ML2 driver was disconnected by ovn-nb-db. > There are > > many > > > error messages from ovn-nb-db leader. > > > ======== > > > 2020-08- > 04T02:31:39.751Z|03138|reconnect|ERR|tcp:10.6.20.81:58620 > <http://10.6.20.81:58620> > > <http://10.6.20.81:58620> : no > > > response to inactivity probe after 5 seconds, > disconnecting > > > 2020-08- > 04T02:31:42.484Z|03139|reconnect|ERR|tcp:10.6.20.81:58300 > <http://10.6.20.81:58300> > > <http://10.6.20.81:58300> : no > > > response to inactivity probe after 5 seconds, > disconnecting > > > 2020-08- > 04T02:31:49.858Z|03140|reconnect|ERR|tcp:10.6.20.81:59582 > <http://10.6.20.81:59582> > > <http://10.6.20.81:59582> : no > > > response to inactivity probe after 5 seconds, > disconnecting > > > 2020-08- > 04T02:31:53.057Z|03141|reconnect|ERR|tcp:10.6.20.83:42626 > <http://10.6.20.83:42626> > > <http://10.6.20.83:42626> : no > > > response to inactivity probe after 5 seconds, > disconnecting > > > 2020-08- > 04T02:31:53.058Z|03142|reconnect|ERR|tcp:10.6.20.82:45412 > <http://10.6.20.82:45412> > > <http://10.6.20.82:45412> : no > > > response to inactivity probe after 5 seconds, > disconnecting > > > 2020-08- > 04T02:31:54.067Z|03143|reconnect|ERR|tcp:10.6.20.81:59416 > <http://10.6.20.81:59416> > > <http://10.6.20.81:59416> : no > > > response to inactivity probe after 5 seconds, > disconnecting > > > 2020-08- > 04T02:31:54.809Z|03144|reconnect|ERR|tcp:10.6.20.81:60004 > <http://10.6.20.81:60004> > > <http://10.6.20.81:60004> : no > > > response to inactivity probe after 5 seconds, > disconnecting > > ======== > > > > > > Could anyone share a bit details how this inactivity > probe works? > > > > > > > > The inactivity probe is sent by both the server and clients > > independently. > > Meaning ovsdb-server will send an inactivity probe every 'x' > configured > > seconds to all its connected clients and if it doesn't get a > reply from > > the client within some time, it disconnects the connection. > > > > The inactivity probe from the server side can be configured. Run > "ovn- > > nbctl list connection" > > and you will see inactivity_probe column. You can set this column > to > > desired value like - ovn-nbctl set connection . > inactivity_probe=30000 > > (for 30 seconds) > > > > The same thing for SB ovsdb-server. > > > > Similarly each client (ovn-northd, ovn-controller, neutron server) > sends > > inactivity probe every 'y' seconds and if the client doesn't get > any > > reply from ovsdb-server it will disconnect the connection and > reconnect > > again. > > > > For ovn-northd you can configured this as - ovn-nbctl set > NB_Global . > > options:northd_probe_interval=30000 > > > > For ovn-controllers - ovs-vsctl set open . external_ids:ovn- > remote- > > probe-interval=30000 > > > > There is also a probe interval for openflow connection from ovn- > > controller to ovs-vswitchd which you can configure as ovs-vsctl > set > > open . external_ids:ovn-openflow-probe-interval=30 (this is in > seconds) > > > > > > Regarding the neutron server I think it is set to 60 seconds. > Please see > > this - > > > https://github.com/openstack/neutron/blob/master/neutron/conf/plugins/ml > > 2/drivers/ovn/ovn_conf.py#L80 > > > > From the logs you shared, it looks like ovsdb-server is not > getting the > > probe reply from neutron server after 5 seconds and hence it is > > disconnecting. Not sure what's happening though. > > > > You can try increasing the inactivity probe interval on the > ovsdb-server > > side with the first command I shared. > > Note: If "ovn-nbctl list connection" returns empty, you need to > create a > > connection row like - ovn-nbctl set-connection ptcp:6641:<IP> > > > > > > Thanks > > Numan > > > > > > > > > > > From OVN ML2 driver log, I see it connected to the leader, > then > > the > > > connection was closed by leader after 5 or 6 seconds. Is > this > > probe one- > > > way or two-ways? > > > Both sides are not busy, not taking much CPU cycles. Not > sure how > > this > > > could happen. Any thoughts? > > > > > > > > > Thanks! > > > > > > Tony > > > > > > > > > > > > _______________________________________________ > > > dev mailing list > > > d...@openvswitch.org <mailto:d...@openvswitch.org> > <mailto:d...@openvswitch.org <mailto:d...@openvswitch.org> > > > > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > _______________________________________________ > > discuss mailing list > > disc...@openvswitch.org <mailto:disc...@openvswitch.org> > <mailto:disc...@openvswitch.org <mailto:disc...@openvswitch.org> > > > https://mail.openvswitch.org/mailman/listinfo/ovs-discuss > > > > > > _______________________________________________ discuss mailing list disc...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-discuss