Aug 29 12:06:34 localhost kernel: usb 3-2: PL-2303 converter now attached to ttyUSB0
right and I can ls /dev/ttyUSB0 and it is there. However when I run /opt/owfs/bin/owfs /dev/ttyUSB0 /mnt/1wire
I can ls it for like a few seconds and then it reads :
ls: /mnt/1wire: Transport endpoint is not connected
Currently I have a DS9097U attached to the PL-2302 and a thermometer attached to the DS. How would I mount the DS by itself without the usb->serial adapter. Do I have to reboot to get it to recognize the serial port?
To give you an idea:
[EMAIL PROTECTED] /]# ls /mnt/1wire/
10.0B3540000000 bus.0 simultaneous structure uncached
alarm settings statistics system
[EMAIL PROTECTED] /]# ls /mnt/1wire/
ls: reading directory /mnt/1wire/: Software caused connection abort
[EMAIL PROTECTED] /]# ls /mnt/1wire/
ls: /mnt/1wire/: Transport endpoint is not connected
On 8/29/05, Alfille, Paul H.,M.D. <[EMAIL PROTECTED]> wrote:
Ok, the serial-to-usb is outside the scope of OWFS -- the operating ssytem creates a "serial" device over USB and assigns it the correct major/minor device numbers. Usally the assignment is something like /dev/ttyUSB0 or whatever. I usually figure it out by plugging and unplugging the usb/serial adapter and looking at the /var/log/messages output.More information at http://owfs.sourceforge.net/adapters.htmlDoes this answer the question?Paul-----Original Message-----OK where is this stuff on the website? because it has eluded me thus far.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Phil Strong
Sent: Monday, August 29, 2005 11:34 AM
To: [email protected]
Subject: Re: Re[2]: [Owfs-developers] trouble with library file libfuse.so.2
On 8/27/05, Alfille, Paul H.,M.D. < [EMAIL PROTECTED]> wrote:Since you are running a serial adapter, shouldn't it be
/opt/owfs/bin/owfs /dev/ttyUSB0 /1wire
i.e. OWFS sees a serial adapter, the usb phase is transparent.
This at least works with the keyspan usb/serial adapters. The ECLO adapter has a
builtin serial conversion, but needs a kernel module patch to be recognized. The
details are on the website and I've submitted the change upstream.
Paul
-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Phil Strong
Sent: Sat 8/27/2005 1:18 PM
To: [email protected]
Subject: Re: Re[2]: [Owfs-developers] trouble with library file libfuse.so.2
Ok so the issue was I needed to run ldconfig to update my library stuffs. I
also made a symlink for libfuse.so.2 in /usr/lib and /usr/local/lib.
Now my issue is I need to mount a usb to serial adapter model no. GUC232A
Also when I try to mount DS9097U-S09 which is a maxim dallas serial 1wire
adapter with a 1wire thermostat attached it says:
[EMAIL PROTECTED] bin]# ./owfs -u /home/mythtv/1wire
fusermount: failed to access mountpoint /home/mythtv/1wire: Transport
endpoint is not connected
On 8/26/05, Petr <[EMAIL PROTECTED]> wrote:
>
> For me the way was to install all FUSE versions 1.9 - 2.3 first to get
> all libraries. I am just a newbie and this was the only way for me,
> how to get OWFS working.
> Petr
> PS> I re downloaded the src for fuse (2.3) and reinstalled. I
> PS> reinstalled owfs after that per instructions on the web. I still
> PS> get this error message.
>
> PS> [EMAIL PROTECTED] bin]$ ./owfs -u /home/mythtv/1wire
> PS> ./owfs: error while loading shared libraries: libfuse.so.2:
> PS> cannot open shared object file: No such file or directory
>
> PS> On 8/25/05, Alfille, Paul H.,M.D. <[EMAIL PROTECTED]> wrote:
>
> PS> Did you run "make install" from fuse directory?
>
> PS>
>
> PS> Simplest test: try owhttpd.
>
> PS>
>
> PS> Which version of fuse did you install? 2.3 works (I think it is the
> latest release).
>
> PS>
>
> PS> In what sense do you mean "mounting"? Physical connections? Software?
>
> PS>
>
> PS> For the later:
>
> PS>
>
> PS> mkdir /home/user/1wire (or whereever)
>
> PS> /opt/owfs/bin/owfs -u /home/user/1wire
>
> PS> ls /home/user/1wire
>
> PS>
>
> PS> Paul
>
> PS>
>
>
> PS> -----Original Message-----
> PS> From: [EMAIL PROTECTED]
> PS> [mailto:[EMAIL PROTECTED] ]On Behalf Of
> PS> Phil Strong
> PS> Sent: Thursday, August 25, 2005 1:54 PM
> PS> To: [email protected]
> PS> Subject: [Owfs-developers] trouble with library file libfuse.so.2
>
> PS> I installed fuse and it seems to be working
>
> PS> I installed owfs and ran the usual install commands.
>
> PS> when I try to run owfs it tells me it is missing libfuse.so.2
> PS> which I have found to be in <fuse>/lib/.libs/ directory.I
> PS> tried altering the classpath and creating a symlink but to no
> PS> avail.Have any run into and fixed this issue.
>
> PS> Also if any has a link to a quick tutorial on mounting
> PS> 1wire devices that will be helpful providing I get past this
> PS> current issue.FYI: I am running Fedora core 3 and installed
> PS> with the rpm package.
>
> PS> --
> PS> Phil Strong
> PS> Synergetic Data Systems
> PS> (w) 240 793 6565
> PS> [EMAIL PROTECTED]
>
>
>
>
>
>
>
>
>
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle
> Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
--
Phil Strong
Synergetic Data Systems
(w) 240 793 6565
[EMAIL PROTECTED]
--
Phil Strong
Synergetic Data Systems
(w) 240 793 6565
[EMAIL PROTECTED]
--
Phil Strong
Synergetic Data Systems
(w) 240 793 6565
[EMAIL PROTECTED]
