0FAA0000000000013835373000010100EE46FFFFFFFFFFFFFFFFFFFFFFFFFFFF
091295CF1B0000003A004DA1FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Tmex format
First line has "directory" with "file" 8570 (3835373000)
Second line has other adapter (12.95CF1B0000003A)
I put in error messages if the line linghts (first byte) or CRC16 checksums don't match.
Paul Alfille
On 8/15/06, Paul Alfille <
[EMAIL PROTECTED]> wrote:
One thought on the barometer: I try to configure the barometer by parsing the EPROM data of the DS2406. With only one sample, it's possible that I didn't cover all configurations. Can you post the contents of your DS2406's EPROM ("memory" or " page.0 and page.1")
I should make that an open invitation to anyone with a TAI8570 barometer from AAG. Post your EPROM.
Thanks,
Paul AlfilleOn 8/15/06, David Torrey <[EMAIL PROTECTED]> wrote:Actually, with 1.0, I found reading the latch was more reliable. The
topology is also a bit more complicated -- there's a hub in the middle:
/tmp/1wire/uncached/1F.63CE02000000/aux/29.070800000000:
> cat sensed.ALL
1,1,1,1,1,1,1,1
> cat latch.ALL
0,0,0,0,0,0,0,0
That was under 2.4p8. And right now, none are actually on. The last 4
aren't even hooked up. Did the logic get reversed? I noticed when
writing the barometer script in Perl that I had to reverse 1's and 0's
for PIO on the write because of the way the circuit was designed.
I'll let this run under p8 for a while and see if it hangs again, then
look at the reported values. Thanks for the quick response.
Thanks,
Dave
On Tue, 2006-08-15 at 12:14 -0400, Paul Alfille wrote:
> Concerning the switches, perhaps syntax has changed since 1.0 (if so,
> I appologize).
>
> I assume you are reading uncached/29.xxxx/sensed.y (y=0-7,BYTE,ALL)
>
> Paul
>
> On 8/15/06, David Torrey < [EMAIL PROTECTED] > wrote:
> I downloaded 2.4p8, and it compiles just fine. However, I
> found a few
> issues:
>
> 1) The DS2408 I use to monitor zone valves doesn't read
> reliably any
> more. The behavior is that various inputs appear "stuck" on
> when they
> had really turned off. Going back to 1.0p0 (yes, that's what
> I had
> still been using) fixes it. Same behavior with 2.4p6. Other
> existing
> devices work properly.
>
> 2) Really what I was hoping to get working is the pressure
> sensor from
> AAG. The directory structure shows up, but none of the files
> in TAI8570
> read on either device. They all give errors. I looked at the
> debugging
> logs from owfs, but they weren't very detailed (even on
> error_level=4).
>
> I know the module works -- I wrote a Perl script that reads it
> correctly. However, pushing and pulling bits that way through
> OWFS and
> Fuse is terribly slow, and it takes nearly a minute to read
> temperature
> and pressure. Thankfully, I only had to read the calibration
> data once,
> and seem to be able to get away without resetting the MS5534
> each time.
>
> Thanks for any help you can provide, or tips on other things
> to try. I
> can provide more information if it helps. Worst case, I just
> read it
> less frequently than my other sensors.
>
> Thanks,
> Dave
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web
> services, security?
> Get stuff done quickly with pre-integrated technology to make
> your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on
> Apache Geronimo
> http://sel.as-us.falkag.net/sel?
> cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
