I don't have Steve Morgan's address, so could you forward it Paul?
I think the problem with FTDI serial adapter could be solved my starting
owserver with parameter "-8bit". The FTDI adapter doesn't seem to like the
6-bit communication.
# owserver -8bit -d /dev/usb/tts/0 -p 3002
Could you try that and tell us if it works?
/Christian
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Alfille
Sent: den 20 september 2007 23:19
To: [email protected]
Subject: [Owfs-developers] Fwd: Project to connect WGT634U to 1-wire
---------- Forwarded message ----------
From: Morgan, Steve H
Date: Sep 20, 2007 4:39 PM
Subject: Project to connect WGT634U to 1-wire
I'm interested in using your library to connect a Netgear WGT634U to a
1-wire temp sensor. I have OPENWRT working fine but have issues with getting
the 1-wire connected to the box.
Do you recommend using the DS9097 or do you recommend using a DS9490 USB
adapter.
I have tried to connect a FTDI serial adapter to the Netgear WGT634U and
then the DS9097 and just can't seem to get data over the 1-wire interface.
I was hoping to get this working and put a how-to out there for others.
Is it possible to get some help?
Stephen Morgan
Enterprise Systems
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
