Hi Christian,
when i use "ps" i see no processes from owfs. With "dmesg" is see fuse was
started.When i start it with "run-owfs" all processes are running (at least 9
pid).
Holger
> From: [EMAIL PROTECTED]> To: [email protected]> Date:
> Thu, 13 Dec 2007 09:33:33 +0100> Subject: Re: [Owfs-developers] owfs will not
> start automatically on openwrt (WRT54GL V1.1)> > > I haven't seen this
> problem before...> > Does any of the ow-processes start when you restart your
> WL-500GP? Or is it> only the process owfs which doesn't start completely?>
> Also... Can you look if the module "fuse" is loaded just after starting up>
> your router? This should be done in the startup-script just before owfs is>
> started.> > /Christian> > > -----Original Message-----> From: [EMAIL
> PROTECTED]> [mailto:[EMAIL PROTECTED] On Behalf Of Holger> Rose> Sent: den 12
> december 2007 17:51> To: [email protected]> Subject:
> [Owfs-developers] owfs will not start automatically on openwrt> (WRT54GL
> V1.1)> > Hi,> > i use ofws with a WL-500GP without problems (freifunk
> firmware).> > Now i have installed owfs on a WRT54GL V1.1 (also freifunk
> firmware > (http://download.berlin.freifunk.net/ipkg/_g+gl/) - owfs packages
> from > http://home.mag.cx/openwrt/0.9/packages/) and when i start it with >
> "run-owfs" all is o.k., i can walk through the bus in /tmp/1wire and the >
> sensors. (fuse init (API version 7.2), fuse distribution version: 2.4.2).>
> BUT i see it only when i start "run-owfs" manually. When i will start it >
> automatically (ENABLESTARTUP="1" in /etc/default/owfs, owftpd, owhttpd, >
> owserver (0644)) i will see the /tmp/1wire directory, but nothing in it. I >
> see no error. When i start it with "run-owfs" manually again, all is o.k.. >
> The path /usr/bin/run-owfs (0755) is o.k. and the path to >
> /etc/init.d/S70owserver, S80owfs, S80owhttpd, S80owftpd (0755) [start force]>
> > is also without a problem.> > Is this a authorizations-problem (under
> openwrt?)? Do you know this problem?> > What can i do?> > I use
> owfs_2.6p6-6_mipsel.ipk owlib_2.6p6-6_mipsel.ipk from >
> http://home.mag.cx/openwrt/0.9/packages/, the owfs_2.6p6-7_mipsel.ipk >
> owlib_2.6p6-7_mipsel.ipk will have problems with my LCD, any other newer >
> version did not work for me under openwrt, because i also never see >
> sensor-contents in my /tmp/1wire directory (not the same error as above, >
> here (newer versions) i see the directories, not the sensors; in my "premium>
> > problem" i see nothing in the 1wire directory).> > Thanks for your help!> >
> Holger
_________________________________________________________________
Importieren Sie ganz einfach Ihre E-Mail Adressen in den Messenger!
http://messenger.live.de/community/neuekontakte_adressimport.html
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
