I have successfully built owfs for WL-500W with Kamikaze-7.09 and
2.4.34-kernel. I haven't copied these packages to any accessible repository
yet though.
I got stuck with the incomplete perl-packages in Kamikaze, and then I
re-wrote all Makefiles to get a full perl-installation on an external
memory-stick.
However. my older packages built for Kamikaze 7.07 located at
http://owfs.sourceforge.net/openwrt/kamikaze/packages/ should work for you.
They are compiled against kernel-2.4.34 and use the same libc as
Kamikaze-7.09.
/Christian
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Alfille
Sent: den 16 februari 2008 13:00
To: [email protected]
Subject: [Owfs-developers] Fwd: 1wire hardware
---------- Forwarded message ----------
From: Marco Tozzini <[EMAIL PROTECTED]>
Date: Feb 16, 2008 4:16 AM
Subject: Re: 1wire hardware
To: Paul Alfille <[EMAIL PROTECTED]>
Cc: Marco Tozzini <[EMAIL PROTECTED]>
Hi Paul
Sorry for delay in reply
I found some problem running OWFS under Openwrt kamikaze 7.09 and ASUS
WL500gP
packages for 7.07 works also for 7.09 but only for kernel 2.6
I need kernel 2.4 to make wifi working too (there is still nod driver
for broadcom wifi on asus and kernel 2.6)
I try to compile OWFS for 7.09 but OWFS has a strange (FOR ME)
configuration way and I'm not able to figure out how to do a complete
compilation
I wonder if you can address me to how to compile the owfs also for
kamikaze 7.09 (I think the same way you did for 7.07 is enough good)
Thanks
Ciao
Marco
P.S.
I'm using OWFS on ASUS WL500gP and it works good also with internal
serial port (2.4 = /dev/tts/1 or 2.6 = /dev/ttyS1)
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
