I have digitemp installed, I used to use that but changed to owfs so that I can use i/o as well as temperature. Next time it happens I will try digitemp as well.
Thanks Mick On Mon, 2011-01-31 at 18:47 -0500, Paul Alfille wrote: > Some of the serial bus masters have an ascii mode that you that is > easy to test with a terminal emulator (LINK, HA5 HA7,...). The other > serial bus masters have a rather specific binary mode (DS9097U, DS9097 > passive). > > The two other ways to test the serial adapter not involving owfs are > digitemp and the 1-wire public domain kit. > > It's also possible to communicate with the serial adapters remotely > using telnet and the > rfc2217 in-band binary mode. > > Paul > > On Mon, Jan 31, 2011 at 6:24 PM, Roberto Spadim <[email protected]> wrote: > > kkkk i was asking "?" not affirming. > > there´s a echo command for serial-onewire converter? > > > > 2011/1/31 Mick Sulley <[email protected]>: > >> Hi Roberto, > >> > >> My 1-wire is currently working OK so I thought I would try out your > >> suggestion to see what I get. > >> > >> I open up a Putty session, set it to serial connection, serial > >> line /dev/ttyS2, speed 9600 > >> > >> There is no cursor in the window, if I type 'hello' and hit return the > >> cursor goes back to the start of the line. I expected it to echo back > >> on the next line, have I done something wrong here? > >> > >> Thanks > >> Mick > >> > >> > >> On Mon, 2011-01-31 at 12:47 -0200, Roberto Spadim wrote: > >>> there's a easy ping test for serial adapters? > >>> for example, if i plug my serial-onewire converter, could i open putty > >>> or another serial program and send "hello" and it will give me > >>> "hello"? > >>> it's just for easy test (without owfs) > >>> > >>> 2011/1/31 Mick Sulley <[email protected]>: > >>> > OK it just happened again. Started my python program and it failed > >>> > with > >>> > DEFAULT: ow_reconnect.c:TestConnection(52) Failed to reconnect DS9097 > >>> > bus master! > >>> > > >>> > In a terminal I ran > >>> > owhttpd -p 3001 -d /dev/ttyS2 --debug > >>> > > >>> > and this gave me > >>> > > >>> > CONNECT: ow_avahi_link.c:OW_Load_avahi_library(72) No Avahi support. > >>> > Library libavahi-client couldn't be loaded > >>> > CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is > >>> > disabled since dnssd library isn't found > >>> > CALL: ow_parsename.c:FS_ParsedName_anywhere(90) path=[] > >>> > DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C > >>> > (for simulated adapters) > >>> > DEBUG: ow_ds9097U.c:DS2480_initialize_repeatedly(259) Attempt #0 to > >>> > initialize the DS9097U > >>> > DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(337) Send the initial > >>> > reset to the bus master. > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_write(451) wrong response (CD > >>> > not 44) > >>> > DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(337) Send the initial > >>> > reset to the bus master. > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 > >>> > not 00) > >>> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt > >>> > at resetting baud rate of bus master /dev/ttyS2 > >>> > DEBUG: ow_ds9097U.c:DS2480_configuration_write(451) wrong response (CD > >>> > not 44) > >>> > > >>> > > >>> > I opened up a browser on http://localhost:3001/ and it says unable to > >>> > connect. > >>> > > >>> > The serial port looks OK > >>> > mick@mick-desktop:~$ dmesg | grep tty > >>> > [ 0.000000] console [tty0] enabled > >>> > [ 0.489257] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > >>> > [ 0.489554] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > >>> > [ 14.681524] 0000:03:07.0: ttyS1 at I/O 0xdf00 (irq = 17) is a 16550A > >>> > [ 14.681616] 0000:03:07.0: ttyS2 at I/O 0xde00 (irq = 17) is a 16550A > >>> > mick@mick-desktop:~$ > >>> > > >>> > > >>> > I then rebooted and it all works fine! > >>> > > >>> > Any idea what could cause this problem? > >>> > > >>> > Thanks > >>> > > >>> > Mick > >>> > > >>> > > >>> > > >>> > ------------------------------------------------------------------------------ > >>> > Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! > >>> > Finally, a world-class log management solution at an even better > >>> > price-free! > >>> > Download using promo code Free_Logger_4_Dev2Dev. Offer expires > >>> > February 28th, so secure your free ArcSight Logger TODAY! > >>> > http://p.sf.net/sfu/arcsight-sfd2d > >>> > _______________________________________________ > >>> > Owfs-developers mailing list > >>> > [email protected] > >>> > https://lists.sourceforge.net/lists/listinfo/owfs-developers > >>> > > >>> > > >>> > >>> > >>> > >> > >> > >> > >> ------------------------------------------------------------------------------ > >> Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! > >> Finally, a world-class log management solution at an even better > >> price-free! > >> Download using promo code Free_Logger_4_Dev2Dev. Offer expires > >> February 28th, so secure your free ArcSight Logger TODAY! > >> http://p.sf.net/sfu/arcsight-sfd2d > >> _______________________________________________ > >> Owfs-developers mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/owfs-developers > >> > >> > > > > > > > > -- > > Roberto Spadim > > Spadim Technology / SPAEmpresarial > > > > ------------------------------------------------------------------------------ > > Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! > > Finally, a world-class log management solution at an even better price-free! > > Download using promo code Free_Logger_4_Dev2Dev. Offer expires > > February 28th, so secure your free ArcSight Logger TODAY! > > http://p.sf.net/sfu/arcsight-sfd2d > > _______________________________________________ > > Owfs-developers mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > > > ------------------------------------------------------------------------------ > Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! > Finally, a world-class log management solution at an even better price-free! > Download using promo code Free_Logger_4_Dev2Dev. Offer expires > February 28th, so secure your free ArcSight Logger TODAY! > http://p.sf.net/sfu/arcsight-sfd2d > _______________________________________________ > Owfs-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
