just want to share some progress I added two more 1-wire masters DS2482-100 and DS2483 with RJ-12 connectors. The purpose is to compare the performance It's not finished yet but the placing is more or less final. I will have to straighten the paths but I think the board can be one sided with few wires on the top layer. I dont't know wich transistor to choose for DS2482-100. I don't know if it's some standard but I used a Z-80 case 83mm x 113 mm. It's a bit larger than Eagle freeware version allows but the wiring fits on 100x80. I was also wondering which standard of wiring RJ45 to use. I decided that I will use the same as RJ12 so the same flat 6/4 wire telephone cable can be put int rj45 plug and be compatible with RJ12.
I was also wondering about DS9503 protection diodes. Will they do their job if the other lines(I mean +5V and GND are not protected). Here's Eagle project. http://ubuntuone.com/2sUJLP2JhCS63IC3YEdHJ8 I also made a lib with the new DS2483 but it's my first lib so it's not finished but the package outline is right and that what's matter for now. http://ubuntuone.com/2xVbCWfotiP8bLSvruE3PD I welcome any suggestions. Bear in mind that I'm not an electronic engineer and may mad some obvious mistakes. -- p4trykx ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
