Dnia 19.05.2012 o 01:37 Guy COLIN <[email protected]> Guy COLIN <[email protected]> napisał(a):
> Patryk <p4trykx <at> o2.pl> writes: > >> >> before writing to the LCD do >> printf "1" > "/mnt/owfs/29.BABC08000000/strobe" >> >> and If you want to fiddle with 3 IO >> >> printf "0" > "/mnt/owfs/29.BABC08000000/strobe" >> > > Patryk you are The Man. You got it, your workaround is perfectly working. > I don't need anymore. This was several weeks I was struggling with that. > Now I can write to lcd AND use the 3 PIO (3 push buttons in my > application) > > Thank you very very much The strobe is related with RSTZ PIN it pokes LCD that the state of PIOs has changed. If you are more interest in this it on page 5 of datasheet http://datasheets.maxim-ic.com/en/ds/DS2408.pdf and here is a part from owfs manual strobe read-write, yes-no RSTZ Pin Mode Control. Configures RSTZ as either RST input or STRB output: configured as RST input (default) configured as STRB output -- p4trykx ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
