Hello, i just got two DS2483 samples (because SOT23 seem to be the most amateur friendly package of the I2C bus-masters). I want to connect this device to my Raspberry Pi now.
Looking at the schematic in the datasheet I have two questions: * I need two pullup resistors to 3.3V, while the chip has to be powered by 5V, right? What size should the resistors have? * Raspberry Pi does not have a SLPZ connector so in order to enable the DS2483 would I need to connect this pin to VCC or Ground? Regards Sven -- Das Internet ist kein rechtsfreier Raum, das Internet ist aber auch kein bürgerrechtsfreier Raum. (Wolfgang Wieland Bündnis 90/Die Grünen) /me is giggls@ircnet, http://sven.gegg.us/ on the Web ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
