Paul,
Thank you very much! That was the problem. I have a lot of experience
with Linux, and with software development, but not so much hardware
knowledge, and I naively assumed that since my LinkUSB has "USB" in its
name, and connects to the computer (the RPi in my case) with a USB
connector, that it must be a USB device. When I changed my owfs.conf file
to say "server: device = /dev/ttyUSB0" instead of "server: usb = all",
everything started working beautifully!
--Mark
On Sat, Jun 15, 2013 at 9:03 PM, Paul Alfille <[email protected]>wrote:
> You have it set up for a USB bus master, but that really means the DS9490R
> USB one made by Maxim. I think you really have a serial type (Link or
> DS9097U) connected to a USB->serial connector (the FTDI chip)
>
> Depending on which actual bus master you are using, it should be
> owserver -d /dev/ttyUSB0
> or
> owserver --link=/dev/ttyUSB0
>
>
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
