Hello, I finally found the correct fuse software and installed it. Also PCRE and Swig. OWFS is now enabled after the install.
I have enabled port 8080 in the Enet 2 web interface and can do a telnet session from the terminal using expect-lite. When I run: /opt/owfs/bin/owserver --debug --enet the IP addresses for the two connected Enet 2 devices are listed but I still get the errors: DEFAULT: ow_server_enet.c:(201) Problem opening OW_SERVER_ENET on IP address=[172.16.1.21] port=[8080] -- is the "1-Wire Setup" enabled? Jeff On Nov 11, 2013, at 10:16 AM, Jeff Dean <[email protected]> wrote: > Hello, > > I am trying to get owserver and owhttpd working on a Mac computer with the > OW-Server Enet from EDS. > > I have downloaded owfs-2.9p1 and in the terminal run: > ./configure --enable-usb --enable-owfs --disable-zero --disable-owphp > --disable-owtcl > make > make install > > I have MacPorts installed but owfs is not enabled. I plan to use tcp so I > don't think this is a concern but I am new to learning about all of this so I > am not sure. > > I enabled port 8080 on the OW-Server webpage > When I try to connect I get errors about the tcp being closed and wonder what > to do: > > Jeffs-MacBook-Pro:~ jeffdean$ /opt/owfs/bin/owserver --debug > --enet=172.16.1.21 -p 8080 > DEBUG MODE > libow version: > 2.9p1 > DEBUG: ow_daemon.c:(166) main thread id = 140735100289408 > CALL: ow_parsename.c:(99) path=[] > DEBUG: owlib.c:(81) Globals temp limits 0C 100C (for simulated adapters) > DEBUG: ow_net_client.c:(85) IP address=[172.16.1.21] port=[8080] > DEBUG: ow_server_enet.c:(183) Add 2nd ENET2 port > DEBUG: ow_server_enet.c:(190) Add 3rd ENET2 port > DEBUG: ow_tcp_read.c:(64) attempt 3 bytes Time: 0.6000000 seconds > DATA: ow_tcp_read.c:(107) [Invalid argument] Select error > DEBUG: ow_read_telnet.c:(111) tcp seems closed > DEBUG: ow_server_enet.c:(228) Error reading inital telnet prompt > DEBUG: ow_server_enet.c:(228) Error reading inital telnet prompt > DEBUG: ow_tcp_read.c:(64) attempt 3 bytes Time: 0.6000000 seconds > DATA: ow_tcp_read.c:(107) [Invalid argument] Select error > DEBUG: ow_read_telnet.c:(111) tcp seems closed > DEBUG: ow_server_enet.c:(228) Error reading inital telnet prompt > DEBUG: ow_server_enet.c:(228) Error reading inital telnet prompt > DEFAULT: ow_server_enet.c:(201) Problem opening OW_SERVER_ENET on IP > address=[172.16.1.21] port=[8080] -- is the "1-Wire Setup" enabled? > CONNECT: owlib.c:(164) Cannot detect an OWServer_Enet on 172.16.1.21:8080 > DEFAULT: owlib.c:(56) No valid 1-wire buses found > DEBUG: ow_exit.c:(18) Exit code = 1 > CALL: ow_lib_close.c:(21) Starting Library cleanup > CALL: ow_lib_stop.c:(23) Clear Cache > DEBUG: ow_cache.c:(296) Flipping cache tree (purging timed-out data) > DEBUG: ow_cache.c:(314) flip cache. tdestroy() will be called. > DEBUG: ow_cache.c:(296) Flipping cache tree (purging timed-out data) > DEBUG: ow_cache.c:(314) flip cache. tdestroy() will be called. > CALL: ow_lib_stop.c:(25) Closing input devices > CALL: ow_lib_stop.c:(27) Closing output devices > DEBUG: ow_connect_out.c:(56) Freeing outbound (null) #0 > CALL: ow_lib_close.c:(35) Finished Library cleanup > DEBUG: ow_lib_close.c:(43) Libraries closed > > Any help and explanation would be greatly appreciated. > Thank you, > Jeff > ------------------------------------------------------------------------------ > November Webinars for C, C++, Fortran Developers > Accelerate application performance with scalable programming models. Explore > techniques for threading, error checking, porting, and tuning. Get the most > from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk > _______________________________________________ > Owfs-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ DreamFactory - Open Source REST & JSON Services for HTML5 & Native Apps OAuth, Users, Roles, SQL, NoSQL, BLOB Storage and External API Access Free app hosting. Or install the open source package on any LAMP server. Sign up and see examples for AngularJS, jQuery, Sencha Touch and Native! http://pubads.g.doubleclick.net/gampad/clk?id=63469471&iu=/4140/ostg.clktrk _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
