Hallo again.
I found a possibly cause:
The polling frequency seems to be set incorrectly :
pi@raspberrypi /mnt/1wire/EF.2D6520150000/barometer $ cat polling_frequency
9
I tried to write to the polling_frequency file using:
pi@raspberrypi /mnt/1wire/EF.2D6520150000/barometer $ sudo nano
polling_frequency
...without success.
How can I change this using OWFS?
Best regards,
Eric
On Mon, Jun 22, 2015 at 2:04 PM, Eric Baumann <eric.mannb...@gmail.com>
wrote:
> Hallo
>
> I have trouble reading from the Hobby Boards Barometer board.
> It seems to be stuck at these values:
> pi@raspberrypi /mnt/1wire/EF.2D6520150000/barometer $ cat pressure
> 67920
> pi@raspberrypi /mnt/1wire/EF.2D6520150000/barometer $ cat temperature
> 36.9
>
> Even
> - when unplugging and plugging the board back in
> - when rebooting raspberrypi and OWFS
> - when reading from the uncached directory
> the values do not change.
>
> It seems to have recognized the dive correctly though:
>
> pi@raspberrypi /mnt/1wire/EF.2D6520150000 $ cat type
> HobbyBoards_EF
>
> pi@raspberrypi /mnt/1wire/EF.2D6520150000 $ cat type_number
> 6
>
> pi@raspberrypi /mnt/1wire/EF.2D6520150000 $ cat version
> 1.0
>
>
> Thanks for any suggestions on how to proceed for troubleshooting...
>
> Eric
>
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
