Peter,
we used to make our splices ourselves, to adapt them to our special
needs and to avoid any connectors whatsoever.
In aggressive enviroment like seawater we would use stainless tubing to
encase the splicing as well as to house the sensor itself.
Then we did fill the tube with 2 component epoxy and for faster and
bubble-free curing we put this into an oven to cure for an hour or so at
100 Celsius - but that depents on the epoxy you use
Cheers,
Martin
On 11/07/2015 02:37 AM, Peter Hollenbeck wrote:
I'll do as you suggest on the splice.
Thank you for your input.
Peter
On Fri, Nov 6, 2015 at 1:21 PM, Colin Reese <[email protected]
<mailto:[email protected]>> wrote:
You're going to need a waterproof butt splice of some sort. I
would probably solder, heat shrink, and epoxy. Cable should be
fine. Might as well double up conductors, could even use four
conductors for ground if you wanted.
C
On Fri, Nov 6, 2015 at 1:11 PM, Peter Hollenbeck
<[email protected] <mailto:[email protected]>> wrote:
Ocean temperature at depth of about 5 feet.
On Fri, Nov 6, 2015 at 1:08 PM, Jan Kandziora <[email protected]
<mailto:[email protected]>> wrote:
Am 06.11.2015 um 21:24 schrieb Peter Hollenbeck:
> I ordered one of these:
> Waterproof DS18B20 Digital temperature sensor
>
> Where I want to measure is 170 feet
>
What do you want to measure? 170 feet seawater depth?
Kind regards
Jan
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
