Hello, one question in that matter: >> >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/temperature12 >> // Switching to 12 bit resolution >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/lasttemp >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/lasttemp >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/lasttemp >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/lasttemp >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/temperature10 >> // Switching to 10 bit resolution >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/lasttemp >> owread -s 192.168.10.110:4304 /uncached/28.3F28AE060000/lasttemp >> >> Correct? >> > This should work with the debugpatch3.diff.
> .../latesttemp first reads data from the scratchpad, then looks into > data[4] to decide which resolution the data in data[0] and data[1] have. Did by the first startup (When never something was read from am sensor with different resulution) read in the value für the highest resolution (First read 12 bit and only when selected sometime the lower one the lower for the next time) or is first read in the 9bit resolution and only when selected sometimes the higher one the next times also the higher one? Best regards, Roland Franke ------------------------------------------------------------------------------ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
