Hi Matthias
Following up to https://sourceforge.net/p/owfs/mailman/message/35416454/ I
splitted
the 3 topics:
3. MoaT on
ATtiny, ATmega (Arduino Nano) - what would be the
most simple MoaT test setup with the chip mentioned?
Matthias' territory, sorry here.
;-)
For playing with the code, the "test" setup (or some modification of it)
would be ideal. That's for ATmega88 with external 16MHz crystal.
I'd recommend against using an ATtiny, or an ATmega with the internal
crystal, until you've got more familiar with the code ? for the simple
reason that they're slower / more resource-constrained, thus you'll have
a harder time debugging if something should go wrong.
Hmmm. So an Arduino Uno would not work? Would any board from the Arduino
product line
be (easily) usable?
I had a look into ATmega88 and found [1,2] but as I can see they both have an 8
MHz crystal
only. Can you recommend any commercial board? If not, do you have a reference
design for me
to start with?
[1] LC AVR ATmega88 core board:
http://www.wayengineer.com/index.php?main_page=product_info&products_id=174#.WAzjA81CTqA
[2] Atmega8 Atmega48 Atmega88 Development Board:
http://www.terapeak.com/worth/2pcs-atmega8-atmega48-atmega88-development-board-avr-no-chip-diy-kit-m81/302001929761
Thanks and Greetings
Dr. Trigon
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
