Out of curiosity, why did you not use one of the supported avr 1Wire slave implementations?
> On May 3, 2017, at 9:55 AM, Péter Zsembery <zsemberype...@gmail.com> wrote: > > Dear Members, > I have implemented a TX-20 anemometer in my home made 1-wire weather station. > Since TX-20 does not have 1-wire interface I had to develop my own 1-wire > slave unit (based on a PIC16F877A MCU) which is a bridge between the > anemometer and the 1-wire network. The 1-wire network is managed by a home > developed 1-wire master (also based on a PIC16F877A MCU) which can handle > the home made 1-wire slave. > Now I want to attach the weather station to a Raspberry Pi. I plan to use > OWFS and a DS2482 as 1-wire master. > Is it possible to configure the OWFS to recognize and communicate with my > custom 1-wire slave device? If yes please advise where to find the > documentation. > Thank you > Peter > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
