Hi George, Thanks for providing me with a complete solution in the ZIP file. However, I am still having problems.
I unzipped the ZIP file that you provided into a directory. I then opened a new Oxygen project. I opened the Options => Preferences => XML Catalog and replaced mine with the gml3.2.0Catalog.xml file included in your ZIP. I then saved preferences, shut down Oxygen and opened it up again. I then opened up the GmlDictionaryMetadataLocal.xml file in your ZIP. I tried to validate this but ended up with 18099 errors. I have saved the errors. You can get them from http://asdd.ga.gov.au/asdd/work/GeorgesGmlDictMetLocalErrors. I checked the first of these errors and saw that they are referring to the GML etc. that was part of your ZIP. I get the same results using the GmlDictionaryMetadata.xml file that you provided with the same gml3.2.0Catalog.xml file. I then imported the gml3.2.0 folder to the project and validated the selection. Oxygen seemed to go through all the different XSDs and reported - via a java window - "validation successful". I am using Oxygen XML editor <oXygen/> XML Editor 10.0, build 2008102212. I don't know what file my Options => Preferences is stored in. Would that content be helpful? If so, tell me the file name and I will make it available on the above web site. Thanks. John > -----Original Message----- > From: George Cristian Bina [mailto:[email protected]] > Sent: Friday, 13 February 2009 7:51 PM > To: Hockaday John > Cc: [email protected] > Subject: Re: [oXygen-user] How do I switch off validation of > XSDs that are called by an XML document instance [SEC=UNCLASSIFIED] > > > Hi John, > > I created a catalog file and placed it in the same folder > that contains > the gml3.2.0 folder. The catalog refers to the schemas with relative > locations - and this is how I would recommend, instead of putting > absolute file URLs. In this way you can easily distribute the schemas > and the catalog to other machines or other users. The catalog > content is > below: > > gml3.2.0Catalog.xml > > <?xml version="1.0" encoding="UTF-8"?> > <!DOCTYPE catalog PUBLIC "-//OASIS//DTD XML Catalogs V1.1//EN" > "http://www.oasis-open.org/committees/entity/release/1.1/catalog.dtd";> > <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog"> > <!-- Schema for EPSG namespace --> > <system > systemId="urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset" > uri="gml3.2.0/EPSG.xsd"/> > <system > systemId="http://www.isotc211.org/2005/gml.3.2.1/gml.xsd"; > uri="gml3.2.0/gml/gml.xsd"/> > > <system > > systemId="http://www.isotc211.org/2005/gml.3.2.1/xlink/xlinks.xsd"; > uri="gml3.2.0/xlink/xlinks.xsd"/> > </catalog> > > The above catalog needs to be set in Options->Preferences -- XML / XML > Catalog in the Catalogs list. > In the same folder I have two files, one uses relative > locations and one > uses absolute locations. Both are reported valid with oXygen 10.0 and > with the 10.1 preview. > > The files contain the following schema locations: > > > xsi:schemaLocation="http://www.opengis.net/gml gml3.2.0/gml/gml.xsd > http://www.w3.org/1999/xlink gml3.2.0/xlink/xlinks.xsd > urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset gml3.2.0/EPSG.xsd" > > and > > xsi:schemaLocation="http://www.opengis.net/gml > http://www.isotc211.org/2005/gml.3.2.1/gml.xsd > http://www.w3.org/1999/xlink > http://www.isotc211.org/2005/gml.3.2.1/xlink/xlinks.xsd > urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset > urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset" > > I put all these in an archive that you can download from > http://www.oxygenxml.com/update/john.zip > Note that this URL is not permanent, the archive will be > deleted after a > week or so. > > If you still get errors please let us know what errors exactly do you > get and what version and build number of oXygen you are using (you > should be able to find these in the Help->About dialog). > > Best Regards, > George > -- > George Cristian Bina > <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger > http://www.oxygenxml.com > > [email protected] wrote: > > Hi George, > > > > Thanks for the reply. I have made comments to your's below: > > > >> -----Original Message----- > >> From: George Cristian Bina [mailto:[email protected]] > >> Sent: Thursday, 12 February 2009 6:52 PM > >> To: Hockaday John > >> Cc: [email protected] > >> Subject: Re: [oXygen-user] How do I switch off validation of > >> XSDs that are called by an XML document instance [SEC=UNCLASSIFIED] > >> > >> > >> Hi John, > >> > >> Putting the local schemas in the schema location attribute, > >> like below: > >> > >> xsi:schemaLocation="http://www.opengis.net/gml gml3.2.0/gml/gml.xsd > >> http://www.w3.org/1999/xlink gml3.2.0/xlink/xlinks.xsd > >> urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset gml3.2.0/EPSG.xsd"> > >> > >> I get the file reported valid without any errors. > >> > > > > I was trying to avoid using relative path names because > this means that my XML document instance will have to be in > the "EPSGschemas" directory. Not everyone will have this > structure and hence I used full URLs and OASIS Catalogue XML > files to point to the local copies of the XSDs. (See below.) > > > > > >> Now, a couple of observations: > >> > >> - your archive contains gml 3.2.0 while your instance refers to gml > >> 3.2.1, see the initial schemaLocation: > >> > >> xsi:schemaLocation="http://www.opengis.net/gml > >> http://www.isotc211.org/2005/gml.3.2.1/gml.xsd > >> http://www.w3.org/1999/xlink > >> http://www.isotc211.org/2005/gml.3.2.1/xlink/xlinks.xsd > >> urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset > >> urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset"> > >> > > > > Yes that is right. However, my OASIS Catalogue XML file has > the following content. > > > > <!-- Schema for EPSG namespace --> > > > > <system > > systemId="urn:x-ogp:spec:schema-xsd:EPSG:0.1:dataset" > > uri="file:///O:/downloads/EPSGschemas/gml3.2.0/EPSG.xsd"/> > > <system > > systemId="http://www.isotc211.org/2005/gml.3.2.1/gml.xsd"; > > > uri="file:///O:/downloads/EPSGschemas/gml3.2.0/gml/gml.xsd"/> > > > > <system > > > systemId="http://www.isotc211.org/2005/gml.3.2.1/xlink/xlinks.xsd"; > > > uri="file:///O:/downloads/EPSGschemas/gml3.2.0/xlink/xlinks.xsd"/> > > > > I thought that Oxygen would always use the local files > (file:///O:/downloads/EPSGschemas/gml3.2.0/) whenever it saw > the schemaLocation value. Is this true or have I > misinterpreted how Oxygen uses OASIS Catalogue XML files? > > > > Today I replaced the schemaLocation values with the three > "uri" file values as shown in the content of the catalogue > file above. IE file:///O:/downloads/EPSGschemas/.... The > validation still gave me the same errors. > > > > I have now temporarily moved the huge XML file into the > EPSGschemas directory and changed the schemaLocation to what > you have mentioned above. IE gml3.2.0/... The validation > still gives me the same errors. Shouldn't this work? > > > >> - the remote schemas at the locations in your original file do not > >> exist, or at least I cannot access them, I get a 404 not > >> found HTTP error. > >> > > > > Yes. That is correct. The schemas have not yet been made > public. I have been given a ZIP file containing the XSDs. I > unzipped them on my local system. This was part of what I > made available to you via the URL below. Because there were > no official web site holding this information I used a bogus > full URL that I know doesn't exist. I expected Oxygen to get > the local XSDs using the OASIS Catalogue XML file as mentioned above. > > > >> - you do not have a location specified for the last schema, > >> so I assume > >> you also have a catalog that maps that to a location? > >> > > > > Yes as mentioned above. > > > > I don't know why you can validate the file and I can't. It > seems to me that I am using the OASIS catalogue file > correctly but there must be some setting that gives me errors > and you none. Could that be right? > > > > Thanks. > > > > > > John > > > >> Best Regards, > >> George > >> -- > >> George Cristian Bina > >> <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger > >> http://www.oxygenxml.com > >> > >> [email protected] wrote: > >>> Hi Sorin, > >>> > >>> Thanks for your prompt reply. > >>> > >>> A long time ago I asked how to validate a whole set of > >> XSDs. The response indicated that I should: open a project, > >> import folders (containing the XSDs) into the project, right > >> click on the folder (holding the XSDs) and validate selection. > >>> This is what I did with the XSDs that I am using to > >> validate the huge XML document instance. The validation > >> errors from above only relate to readme files in the > >> directories. Therefore, I assume that the XSDs are valid. I > >> even removed the readme files and the validation still works. > >>> I have tarred and gzipped the XSDs that I am dealing with. > >> You can download them from: > >> http://asdd.ga.gov.au/asdd/work/epsgSchemas.tar.gz > >>> I then validate the huge XML document instance that is > >> supposed to be valid according to the above mentioned XSDs. > >> When I do this there are thousands of errors related to the > >> XSDs mentioned above and within the document. > >>> The huge file that I am trying to validate is available at > >> http://asdd.ga.gov.au/asdd/work/GmlDictionaryMetadata.xml > >>> Thanks. > >>> > >>> > >>> John > >>> > >>>> -----Original Message----- > >>>> From: [email protected] > >>>> [mailto:[email protected]] On Behalf Of > >> Sorin Ristache > >>>> Sent: Wednesday, 11 February 2009 7:03 PM > >>>> To: [email protected] > >>>> Subject: Re: [oXygen-user] How do I switch off validation of > >>>> XSDs that are called by an XML document instance > [SEC=UNCLASSIFIED] > >>>> > >>>> > >>>> Hello, > >>>> > >>>> The XML Schema is validated implicitly when an XML file is > >> validated > >>>> against that schema. You cannot disable that with a > >> preference. If the > >>>> XML Schema is valid then the validation errors are in > the XML file. > >>>> Please send some sample files to see if the schema or the > >> XML file is > >>>> not valid. > >>>> > >>>> > >>>> Regards, > >>>> Sorin > >>>> > >>>> > >>>> [email protected] wrote: > >>>>> Hi, > >>>>> > >>>>> I have an XML document instance and when I validate it > >>>> against and XSD, Oxygen 10.0 validates the XSD? I have been > >>>> told by so called experts that the XSDs are valid but I keep > >>>> on getting the errors. What preferences do I set to validate > >>>> the XML document instance and not the relevant XSDs? > >>>>> Thanks. > >>>> _______________________________________________ > >>>> oXygen-user mailing list > >>>> [email protected] > >>>> http://www.oxygenxml.com/mailman/listinfo/oxygen-user > >>>> > >>> _______________________________________________ > >>> oXygen-user mailing list > >>> [email protected] > >>> http://www.oxygenxml.com/mailman/listinfo/oxygen-user > _______________________________________________ oXygen-user mailing list [email protected] http://www.oxygenxml.com/mailman/listinfo/oxygen-user
