Hello Frank,
Please see some answers below:
If the pushed content is not shown in the Oxygen Editor, then the
feature is not really useful for me. I need to see it to have control
over what I am doing.
As I said, Oxygen does not show the push in place where the content is
pushed.
The conref-push content does not appear in CHM output either. Perhaps
this has to do with the fact that I still use oXygen V21.1 to generate
CHM output. (I made some XSL customizations which are not easy for me
to apply to V25, a bit difficult and lengthy to explain...).
I do not know about that, if plain DITA to HTML5 in Oxygen 25.1 output
shows the push, then the publishing works. If not, probably the way in
which you attempt to push might be incorrect, if you send us a sample
project we can look into this further.
It appears much simpler for me to filter the contents out. But owing
to the way my process is set up, I would need to apply a second
ditaval file.
Can I specify two ditaval files for the "args.filter" argument? This
would be the best.
Yes:
https://www.dita-ot.org/dev/parameters/parameters-base.html#base__args.filter
I heard of ditvalref branch filtering and I tested this. It does not
create the desired result as duplicates of every reused topic are
created. This is not what I want and it messes up many topic
references. Can I set up branch filtering differently so that no topic
duplicates are created? Probably not...
Once you choose using branch filtering you need to use also key scopes,
use only keyrefs and conkeyrefs. So yes you should probably avoid this
if you have other choices.
Regards,
Radu
Radu Coravu
Oxygen XML Editor
On 3/28/23 15:18, Frank Dissinger wrote:
Hi Radu,
Thank you for the link. Hm...
If the pushed content is not shown in the Oxygen Editor, then the
feature is not really useful for me. I need to see it to have control
over what I am doing.
The conref-push content does not appear in CHM output either. Perhaps
this has to do with the fact that I still use oXygen V21.1 to generate
CHM output. (I made some XSL customizations which are not easy for me
to apply to V25, a bit difficult and lengthy to explain...).
It appears much simpler for me to filter the contents out. But owing
to the way my process is set up, I would need to apply a second
ditaval file.
Can I specify two ditaval files for the "args.filter" argument? This
would be the best.
And I would need a second attribute in addition to "product",
otherwise I would have to edit each and every element that uses a
"product" attribute. There are not so many attributes available.
Perhaps I could (mis)use "platform"... (for indicating the project).
I heard of ditvalref branch filtering and I tested this. It does not
create the desired result as duplicates of every reused topic are
created. This is not what I want and it messes up many topic
references. Can I set up branch filtering differently so that no topic
duplicates are created? Probably not...
The reason is that my ditaval files contain conditions for creating
variants (oem1, oem2, etc. -- no condition stands for the base
product) of a product group (project1, project 2). The same ditaval
conditions (oem1, oem2, etc.) are used across different product
groups. It never occurred to me to filter on product groups (projects)
because I use root ditamaps stored in different folders to create
output for different product groups.
Regards,
Frank
------------------------------------------------------------------------
Am 27.03.2023 um 18:50 schrieb Oxygen XML Editor Support (Radu Coravu):
Hi Frank,
Maybe this will help:
https://blog.oxygenxml.com/presentation-reuse/conref_push.html
One remark, Oxygen will not show the pushed content in place but
publishing should work.
Regards,
Radu
Radu Coravu
Oxygen XML Editor
On 3/27/23 18:05, Frank Dissinger wrote:
Hi all,
I have tested the "DITA > Push Current element" feature, but cannot
get it to work.
I want to inject a <dlentry> element into a shared topic which is
used in two projects. The element to be injected is stored in a
warehouse topic for project 1. What I want is to inject this element
only when project 1 is built. When project 2 is built, the key to
the warehouse topic resolves to a different file which doese not
include the element. So what I hope is that the element is only
injected when I build project 1 and that it is left out when I build
project 2 -- without any error or warning generated in the log file
or in Oxygen's editor window.
However, the element does not appear in project 1 and in Oxygen it
is shown as an empty <dt><p> struture. In a previous attempt the
element was shown in the editor window, but not in output either. I
can't remember what I did differently...
I may not have undestood this feature correctly. Can someone
enlighten me? Thank you.
Regards,
Frank
The dita code:
*
*
*file.dita*
<dlentry conaction="mark" conkeyref="lib_ref/my_id">
<dt/>
<dd>
<p/>
</dd>
</dlentry>
<dlentry conaction="pushafter">
<dt>A term. The term in lib_ref.dita should be injected
after that.</dt>
<dd>
<p>Explanation</p>
</dd>
</dlentry>
*lib_ref.dita
*
<dl>
<dlentry id="my_id">
<dt>The term to inject after the term in file.dita</dt>
<dd>
<p>Explanation</p>
</dd>
</dlentry>
</dl>
*variables.ditamap*
<keydef href="reuse/lib_ref.dita" keys="lib_ref"/>
Appearance in oXygen.
--
*Frank Dissinger*
Documentation Manager
....................................................................
*CGS Publishing Technologies International GmbH*
*Email *frank.dissin...@cgs-oris.com | *Web* www.cgs-oris.com
<http://www.cgs-oris.com/>
*Address* Kettelerstr. 24 | D-63512 Hainburg | Germany
*Phone* +49 6182 9626-27 | *Fax* +49 6182 9626-99
*Commercial register* Offenbach, HRB no. 21495
*Managing directors* Bernd Rückert, Christoph Thommessen
https://www.cgs-oris.com/Signatur.png
<https://www.cgs-oris.com/signatur>
_______________________________________________
oXygen-user mailing list
oXygen-user@oxygenxml.com
https://www.oxygenxml.com/mailman/listinfo/oxygen-user
_______________________________________________
oXygen-user mailing list
oXygen-user@oxygenxml.com
https://www.oxygenxml.com/mailman/listinfo/oxygen-user
--
*Frank Dissinger*
Documentation Manager
....................................................................
*CGS Publishing Technologies International GmbH*
*Email *frank.dissin...@cgs-oris.com | *Web* www.cgs-oris.com
<http://www.cgs-oris.com/>
*Address* Kettelerstr. 24 | D-63512 Hainburg | Germany
*Phone* +49 6182 9626-27 | *Fax* +49 6182 9626-99
*Commercial register* Offenbach, HRB no. 21495
*Managing directors* Bernd Rückert, Christoph Thommessen
https://www.cgs-oris.com/Signatur.png <https://www.cgs-oris.com/signatur>
_______________________________________________
oXygen-user mailing list
oXygen-user@oxygenxml.com
https://www.oxygenxml.com/mailman/listinfo/oxygen-user
