Hi, It seem to be problem with network traffic.
Have you tried to sniff network traffic to be sure that udp traffic reaches from one node to another ?? Try on server1: tcpdump -i interface -p udp -s 192.168.100.112 on server2: tcpdump -i interface -p udp -s 192.168.100.111 if there will be no packet traffic, that means you have some network issue. BTW: Is SELinux enabled on nodes ?? -- Regards Andrew 2013/1/30 Hans Bert <dadeda2...@yahoo.de> > Hello, > > we had to move from Fedora 16 to Fedora 18 and wanted to set up Corosync > with Pacemaker and PCS as management tool. > With F16 our cluster was running pretty good, but with F18 after 5 days we > are reaching the point were we don't have > got ideas what might be the problem(s). > > > The cluster is build of two servers (server1=192.168.100.111; > server2=192.168.100.112) > > Based on the Howto for F18 with pcs we created the following corosync.conf: > > totem { > version: 2 > secauth: off > cluster_name: mcscluster > transport: udpu > } > > nodelist { > node { > ring0_addr: 192.168.100.111 > } > node { > ring0_addr: 192.168.100.112 > } > } > > quorum { > provider: corosync_votequorum > } > > logging { > fileline: off > to_stderr: no > to_logfile: yes > to_syslog: yes > logfile: /var/log/cluster/corosync.log > debug: on > timestamp: on > } > > > > After we started the server a status check shows us: > > > [root@server1 corosync]#pcs status corosync > > Membership information > ---------------------- > Nodeid Votes Name > 1868867776 1 server1 (local) > > [root@server1 ~]# pcs status > Last updated: Wed Jan 30 10:45:17 2013 > Last change: Wed Jan 30 10:18:56 2013 via cibadmin on server1 > Stack: corosync > Current DC: server1 (1868867776) - partition WITHOUT quorum > Version: 1.1.8-3.fc18-394e906 > 1 Nodes configured, unknown expected votes > 0 Resources configured. > > > Online: [ server1 ] > > Full list of resources: > > > > And on the other server: > > > [root@server2 corosync]# pcs status corosync > > Membership information > ---------------------- > Nodeid Votes Name > 1885644992 1 server2 (local) > > [root@server2 corosync]# pcs status > Last updated: Wed Jan 30 10:44:40 2013 > Last change: Wed Jan 30 10:19:36 2013 via cibadmin on server2 > Stack: corosync > Current DC: server2 (1885644992) - partition WITHOUT quorum > Version: 1.1.8-3.fc18-394e906 > 1 Nodes configured, unknown expected votes > 0 Resources configured. > > > Online: [ server2 ] > > > > > > > The only warnings and errors in the logfile are: > > [root@server1 ~]# cat /var/log/cluster/corosync.log | egrep > "warning|error" > Jan 30 10:25:59 [1608] server1 crmd: warning: do_log: FSA: Input > I_DC_TIMEOUT from crm_timer_popped() received in state S_PENDING > Jan 30 10:25:59 [1607] server1 pengine: warning: cluster_status: We > do not have quorum - fencing and resource management disabled > Jan 30 10:28:25 [1525] server1 corosync debug [QUORUM] getinfo response > error: 1 > Jan 30 10:40:59 [1607] server1 pengine: warning: cluster_status: We > do not have quorum - fencing and resource management disabled > > > root@server2 corosync]# cat /var/log/cluster/corosync.log | egrep > "warning|error" > Jan 30 10:27:18 [1458] server2 crmd: warning: do_log: FSA: Input > I_DC_TIMEOUT from crm_timer_popped() received in state S_PENDING > Jan 30 10:27:18 [1457] server2 pengine: warning: cluster_status: We > do not have quorum - fencing and resource management disabled > Jan 30 10:29:19 [1349] server2 corosync debug [QUORUM] getinfo response > error: 1 > Jan 30 10:42:18 [1457] server2 pengine: warning: cluster_status: We > do not have quorum - fencing and resource management disabled > Jan 30 10:44:36 [1349] server2 corosync debug [QUORUM] getinfo response > error: 1 > > > > > We have installed the following packages: > > corosync-2.2.0-1.fc18.i686 > corosynclib-2.2.0-1.fc18.i686 > drbd-bash-completion-8.3.13-1.fc18.i686 > drbd-pacemaker-8.3.13-1.fc18.i686 > drbd-utils-8.3.13-1.fc18.i686 > pacemaker-1.1.8-3.fc18.i686 > pacemaker-cli-1.1.8-3.fc18.i686 > pacemaker-cluster-libs-1.1.8-3.fc18.i686 > pacemaker-libs-1.1.8-3.fc18.i686 > pcs-0.9.27-3.fc18.i686 > > > > Firewalls are disabled, Pinging and SSH communication is working without > any problems. > > With best regards > > _______________________________________________ > Pacemaker mailing list: Pacemaker@oss.clusterlabs.org > http://oss.clusterlabs.org/mailman/listinfo/pacemaker > > Project Home: http://www.clusterlabs.org > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf > Bugs: http://bugs.clusterlabs.org >
_______________________________________________ Pacemaker mailing list: Pacemaker@oss.clusterlabs.org http://oss.clusterlabs.org/mailman/listinfo/pacemaker Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org