you can do a: radsniff -i any -f "port 5999" -x on the server and trigger a CoA and paste the output.
Le jeu. 26 juin 2025 à 15:24, Jeremy Yoke <jeremy.y...@trealitysvs.com> a écrit : > Hello Fabrice, > > > > Thank you for your response. Can you explain what you mean by this the > attributes and values? How I would get these? > > > > Kind Regards, > > > > *Jeremy Yoke* > > *IT Manager* > > *TREALITY**®** Simulation Visual Systems* > > > > *From:* Fabrice Durand <oeufd...@gmail.com> > *Sent:* Tuesday, June 24, 2025 9:24 PM > *To:* packetfence-users@lists.sourceforge.net > *Cc:* Jeremy Yoke <jeremy.y...@trealitysvs.com> > *Subject:* Re: [PacketFence-users] Aruba 505 and 515 V8.12 > > > > You don't often get email from oeufd...@gmail.com. Learn why this is > important <https://aka.ms/LearnAboutSenderIdentification> > > Hello Jeremy, > > > > Do you have the attributes and values sent in the CoA request ? > > > > Regards > > Fabrice > > > > > > Le mar. 24 juin 2025 à 17:44, Jeremy Yoke via PacketFence-users < > packetfence-users@lists.sourceforge.net> a écrit : > > Hello Community, > > > > Looking for some assistance with Aruba IAP group. Initially I had > everything working ok. Due to some issues with the APs themselves I had to > update the firmware to 8.12.05_92330 SSR > > Since then I am receiving Disconnect-NAK from the APs when a COA is issued. > > > > These are Aruba instants mostly model 505 and a couple 515 > > The 515 is the preferred master. > > > > The template I am using is Aruba Instant Access, also tried the Aruba > Instant with seemingly no change. > > I am doing Role Mapping by VLAN ID > > Use COA > > Use Connector For Deauth > > I also tried forcing the COA port to 5999 > > > > All was working prior to firmware update currently the only difference is > making the port 5999. > > Authorizations and VLAN assignment is still functioning. > > > > Here is the RADIUS log with a Disconnect-NAK > > > > RADIUS Reply > > NAS-IP-Address = 10.1.145.100 " > > Message-Authenticator = DD JJlB(??/0?`?e " > > NAS-Port-Type = Wireless-802.11 " > > Code = Disconnect-NAK " > > Error-Cause = Session-Context-Not-Found > > > > Does anyone have some ideas on how to resolve this? > > > > *Jeremy Yoke* > > *IT Manager* > > *TREALITY®** Simulation Visual Systems* > > 600 Bellbrook Ave. > > Xenia, Ohio 45385 > > Cell: +1 (937) 901 5684 > > jeremy.y...@trealitysvs.com > > www.TREALITYSVS.com <http://www.trealitysvs.com/> > > > ------------------------------ > > Confidentiality Notice: > > This e-mail message, including any attachments, is for the sole use of the > intended recipient(s) and may contain confidential or proprietary > information. Any unauthorized review, use, disclosure, or distribution is > prohibited. If you are not the intended recipient, immediately contact the > sender by reply e-mail and destroy all copies of the original message. > > *TREALITY SVS, LLC. <http://www.trealitysvs.com/>* > > _______________________________________________ > PacketFence-users mailing list > PacketFence-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/packetfence-users > >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
