David, Unfortunately, you will have to set the vlan manually. Those are normally configured in :
/etc/sysconfig/network-script/ifcfg-ethX.Y ( where X = interface number: eth0, eth1, eth2... and Y is the vlan number... ) example of ifcfg-eth0 DESCRIPTION=MANAGEMENT_INTERAFCE DEVICE=eth0 BOOTPROTO=none ONBOOT=yes HWADDR=THE:MAC:ADD:OF:YOUR:NIC TYPE=Ethernet NETMASK=255.255.255.0 IPADDR=172.16.1.5 USERCTL=no IPV6INIT=no example of ifcfg-eth0.5 DESCRIPTION=REGISTRATION_INTERFACE VLAN=yes DEVICE=eth0.5 BOOTPROTO=static ONBOOT=yes TYPE=Ethernet IPADDR=172.16.5.5 NETMASK=255.255.255.0 Regards, M-A Le 11-03-30 11:10, Palmer, David W. a écrit : > Ok, > > So I went through and re-installed the system and to make sure that DHCP and > named were correctly pulled down with packetfence-complete package. > > Now the issue that I am running into when starting packetfence is DHCP is not > starting correctly. I believe that I need to setup 802.1Q interfaces on the > packetfence server. My question is does Packetfence do this for me or is this > something I need to create > > > Here is my networks.conf: > > [10.28.4.0] > type=registration > netmask=255.255.255.0 > gateway=10.28.4.2 > pf_gateway= > named=enabled > domain-name=registration.cazenovia.edu > dns=10.28.4.2 > dhcpd=enabled > dhcp_start=10.28.4.10 > dhcp_end=10.28.4.254 > dhcp_default_lease_time=300 > dhcp_max_lease_time=300 > > [10.28.5.0] > type=isolation > netmask=255.255.255.0 > gateway=10.24.5.2 > pf_gateway= > named=enabled > domain-name=isolation.cazenovia.edu > dns=10.24.5.2 > dhcpd=enabled > dhcp_start=10.28.5.10 > dhcp_end=10.28.5.254 > dhcp_default_lease_time=300 > dhcp_max_lease_time=300 > > > Thanks, > > David > > > > -----Original Message----- > From: Marc-André Jutras [mailto:mjut...@inverse.ca] > Sent: Tuesday, March 15, 2011 11:25 AM > To: packetfence-users@lists.sourceforge.net > Subject: Re: [Packetfence-users] DHCP Question > > Hello David, > > Ok, first thing to check is your ip definition in networks.conf ( under > /usr/local/pf/conf ) , PF will regenerate any dhcpd settings based on the > info included in this file every time you will restart PF daemon. > Then, adjust your ip in your named template to answers correctly your > dns request... ( /usr/local/pf/conf/template/ files: > named-isolation.ca and named-registration.ca, validate the ip there to > reflect yours... ) > > From that point, you should be good to restart PF and validate that the > DHCPD daemon is now listening on your isolation and registration network > interface correctly... ( /etc/init.d/packetfence restart or service > packetfence restart ) > > points to keep in mind: > - PF come with the latest stable version of dhcpd and named, no needs to > configure or install these daemons included in your Linux distribution... > - make it work before adding more security to it : disable iptables for > testing, re-enable it when you'll be ready for your final tests... > > Regards, > M-A > > Le 11-03-15 10:19, Palmer, David W. a écrit : >> Hello All, >> >> I am currently working on testing packetfence vs several commercial >> NAC solutions. However, I am having an issue getting DHCPD to start. I >> receive this error: >> >> **************************************************************** >> >> No subnet declaration for eth0 (172.28.4.74). >> >> ** Ignoring requests on eth0. If this is not what >> >> you want, please write a subnet declaration >> >> in your dhcpd.conf file for the network segment >> >> to which interface eth0 is attached. ** >> >> Not configured to listen on any interfaces! >> >> **************************************************************** >> >> What I have gathered is that I need to configure my registration >> (10.28.4.0) and isolation (10.28.5.0) subnets inside of my dhcpd.conf >> file. What I am wondering is if I do this inside of the >> /etc/dhcpd.conf or is there a template inside of the pf directory? >> What should the subnet configuration look like? >> >> Thank you, >> >> David >> >> >> ---------------------------------------------------------------------- >> -------- >> Colocation vs. Managed Hosting >> A question and answer guide to determining the best fit for your >> organization - today and in the future. >> http://p.sf.net/sfu/internap-sfd2d >> >> >> _______________________________________________ >> Packetfence-users mailing list >> Packetfence-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/packetfence-users > ------------------------------------------------------------------------------ Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf _______________________________________________ Packetfence-users mailing list Packetfence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
