PacketFence is behaving differently now.
I receive an IP from PacketFence. It still places me into the normal VLAN
though (not sure why). Then, I can only ping the devices in the normal
VLAN. Captive portal page does load by default. I must type the URL
manually, and can only access by IP. DNS is not allowed because the IP of
the DNS server is on the management network.
The switch, wireless controller and PacketFence are all aware of the
VLANs. Switch is x.x.x.1, wireless is x.x.x.2, and PacketFence is x.x.x.3
on each.
I know that my design must be flawed somewhere. Any thoughts?
On Tue, Dec 13, 2011 at 9:51 AM, lint <[email protected]> wrote:
> On 11-12-13 08:09AM, Francois Gaudreault wrote:
> >Ensure that the vlan assignments are properly configured in switches.conf.
>
> Thank you for the reply, I have configured them correctly, please see
> below. The wireless controller also has the same settings as the default
> profile:
>
> [default]
> vlans=95,96,97,98,99,100
> normalVlan=100
> registrationVlan=95
> isolationVlan=96
> macDetectionVlan=97
> guestVlan=98
>
> [default]
> vlans=95,96,97,98,99,100
> normalVlan=100
> registrationVlan=95
> isolationVlan=96
> macDetectionVlan=97
> guestVlan=98
> customVlan1=
> customVlan2=
> customVlan3=
> customVlan4=
> customVlan5=
> VoIPEnabled=no
> voiceVlan=
> mode=production
> macSearchesMaxNb=30
> macSearchesSleepInterval=2
> uplink=dynamic
>
>
------------------------------------------------------------------------------
Systems Optimization Self Assessment
Improve efficiency and utilization of IT resources. Drive out cost and
improve service delivery. Take 5 minutes to use this Systems Optimization
Self Assessment. http://www.accelacomm.com/jaw/sdnl/114/51450054/
_______________________________________________
Packetfence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
