Hi Jake,
Didn`t start yet, What I understand is:
* Create the object in PF, i.e, configure a new switch with the type WLC.
* Define the IP in the controller field, I think should be the same as for
the object.
* Configure a stronsecretpassword for RADIUS section in the PF switch
definition.
* SNMP shouldn`t be necessary, (I think that not, but previously in MAB for
2960 I was wrong, so I will configure anyway)
In The side of the controller, I should.
* Define the SSID.
* Configure WPA + WPA2 for 802.1x Auth.
* Point RADIUS servers to PF box.
* Allow AAA override.
I think that's all, however like I said, I need to send the configuration
before testing, so that are the roots of my doubts.
Let me know if I`m in the rigth path, if there should be like trick in the
custom.pm or something additional to the WLC side.
On Wed, Sep 3, 2014 at 3:12 PM, Sallee, Jake <[email protected]> wrote:
> >> Actually I have a lot of experience with the 3.3.2 versión
>
> Excellent! That helps a lot.
>
> So where are you in getting your WLC hooked up to your PF server?
>
> Are you just starting or have you added it and are having issues?
>
> Jake Sallee
> Godfather of Bandwidth
> System Engineer
> University of Mary Hardin-Baylor
> WWW.UMHB.EDU
>
> 900 College St.
> Belton, Texas
> 76513
>
> Fone: 254-295-4658
> Phax: 254-295-4221
> ________________________________
> From: Juan Camilo Valencia [[email protected]]
> Sent: Wednesday, September 03, 2014 12:00 PM
> To: [email protected]
> Subject: Re: [PacketFence-users] WLC 5508 Conf
>
>
> Hi Jake,
>
> Actually I have a lot of experience with the 3.3.2 versión deployed for
> almost a couple of years with WDS and AP and a bunch of variety if cisco
> Switches. I jumped into the 4 branch 6 months ago into the lab environment,
> but rigth now is necessary to pass into production mode. I have deployed
> 4.3 version in a pilot with 2960 stack, and now the following is the
> wireless, so I think that I will understand the majority of things in PF
> language (I hope so). So I appreciate every single Help that you can
> provide me.
>
> Best Regards,
>
> El sep 3, 2014 10:45 AM, "Sallee, Jake" <[email protected]<mailto:
> [email protected]>> escribió:
> Wow, okay.
>
> I have been running PF in conjunction with my 5508 for about 3 years and
> it works well.
>
> Before you jump in with both feet, I need to ask something.
>
> Have you successfully setup and tested PF in a lab/test environment? If
> you have not I strongly urge you to do that first. PF is a very capable
> product and can do A LOT, but it can be daunting if you do not approach it
> with the correct mindset.
>
> If you have already successfully set up PF in a lab type of environment, I
> am happy to help as much as I can.
>
> Honestly, setting up the WLC to work with PF is going to be about 5% of
> the work involved in getting PF deployed.
>
> Where are you currently in your PF setup? Have you installed PF and
> configured it and are now stuck on the WLC?
>
> Jake Sallee
> Godfather of Bandwidth
> System Engineer
> University of Mary Hardin-Baylor
> WWW.UMHB.EDU<http://WWW.UMHB.EDU>
>
> 900 College St.
> Belton, Texas
> 76513
>
> Fone: 254-295-4658
> Phax: 254-295-4221
> ________________________________
> From: Juan Camilo Valencia [[email protected]<mailto:
> [email protected]>]
> Sent: Wednesday, September 03, 2014 7:02 AM
> To: [email protected]<mailto:
> [email protected]>
> Subject: [PacketFence-users] WLC 5508 Conf
>
> Hi Guys,
>
> We are going to configure packetfence with a WLC 5508 with IOS 7.6.100,
> this is my first time joining a WLC with packetfence. I have being reading
> the Network configuration devices and I'm a little confuse. I saw several
> threads of discussion about this particular device (Apparently this CISCO
> device is very popular), so I guess that there are several users that
> already did this configuration, can you help me to understand what are the
> steps that I need to follow in order to make this configuration to work?.
> We need an SSID secure with WPA2 enterprise security authenticating against
> an AD without the LDAP module, just using RADIUS. I'm confused because in
> the docs for the secure SSID the example is whit a WISM, is that part of
> the WLC 5508? (I have zero experience with that and I need to provide the
> steps to another provider that is who manage this device) Can I follow this
> steps and will be fine? or Do you have a steps summary or CLI commands to
> make it happen?
>
> Thanks a lot for your help, and let me know where can I start whit this.
>
> Best Regards from Colombia
>
> --
>
> “Choose a job you love, and you will never have to work a day in your life”
>
>
> ------------------------------------------------------------------------------
> Slashdot TV.
> Video for Nerds. Stuff that matters.
> http://tv.slashdot.org/
> _______________________________________________
> PacketFence-users mailing list
> [email protected]<mailto:
> [email protected]>
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
> ------------------------------------------------------------------------------
> Slashdot TV.
> Video for Nerds. Stuff that matters.
> http://tv.slashdot.org/
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
--
*“Choose a job you love, and you will never have to work a day in your
life”*
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
