Hi everyone. I'm new to PF and use it in my project. I've already configured my PF in inline mode. However, when I tested the inline interface by connecting to another computer, the computer was able to get IP from DHCP but unable to open the captive portal. Does anybody know the possible errors occurred during configuring the PF...?
The current config are shown below. I use 127.0.0.1 as DHCP and DNS server IP. [database] # database.pass # Password for the mysql database used by PacketFence. pass=P******* [interface eth0] ip=10.0.2.15 type=management,high-availability mask=255.255.255.0 [interface eth2] enforcement=inlinel2 ip=192.168.10.1 type=internal mask=255.255.255.0 ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
