I meant switch config, i'm using a cisco catalyst 3560.
2015-05-27 17:18 GMT+02:00 Sohaib Afourid <[email protected]>:
> Again, thank you very much for your time and patience.
> In my router configuration i followed the device guide provided by
> packetfence.
> Once i plug my laptop in the specified port, the authentcation cloud pops
> up (since i configured my Windows 7 client for peap authentication, i also
> added the CA certificat, the one i created in pf/raddb/certs) I insert the
> username and password i created in the admin GUI, but it gets rejected and
> my laptop gets authenticated by MAB (which is not what i want) and the port
> gets redirected to the Registration VLAN.
> Is this how it is supposed to work ?
> here is the output from radiusd /etc/raddb -d /usr/local/pf/raddb -X
> main {
> user = "pf"
> group = "pf"
> allow_core_dumps = no
> }
> including dictionary file /usr/local/pf/raddb/dictionary
> main {
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/usr/local/pf/var"
> sbindir = "/usr/sbin"
> logdir = "/usr/local/pf/logs"
> run_dir = "/usr/local/pf/var/run"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/usr/local/pf/logs/radacct"
> hostname_lookups = no
> max_request_time = 10
> cleanup_delay = 5
> max_requests = 20000
> pidfile = "/usr/local/pf/var/run/radiusd.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = yes
> auth_badpass = no
> auth_goodpass = no
> }
> security {
> max_attributes = 200
> reject_delay = 1
> status_server = yes
> allow_vulnerable_openssl = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = "testing123"
> response_window = 20
> max_outstanding = 65536
> require_message_authenticator = yes
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> num_answers_to_alive = 3
> num_pings_to_alive = 3
> revive_interval = 120
> status_check_timeout = 4
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = "137846"
> nastype = "other"
> }
> client 172.16.202.0/24 {
> require_message_authenticator = no
> secret = "testing1234"
> shortname = "pf"
> }
> client 0.0.0.0/0 {
> require_message_authenticator = no
> dynamic_clients = "dynamic_client_server"
> lifetime = 600
> }
> radiusd: #### Instantiating modules ####
> instantiate {
> Module: Linked to module rlm_exec
> Module: Instantiating module "exec" from file
> /usr/local/pf/raddb/modules/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> }
> Module: Linked to module rlm_expr
> Module: Instantiating module "expr" from file
> /usr/local/pf/raddb/modules/expr
> Module: Linked to module rlm_expiration
> Module: Instantiating module "expiration" from file
> /usr/local/pf/raddb/modules/expiration
> expiration {
> reply-message = "Password Has Expired "
> }
> Module: Linked to module rlm_logintime
> Module: Instantiating module "logintime" from file
> /usr/local/pf/raddb/modules/logintime
> logintime {
> reply-message = "You are calling outside your allowed timespan "
> minimum-timeout = 60
> }
> Module: Linked to module rlm_sql
> Module: Instantiating module "sql" from file /usr/local/pf/raddb/sql.conf
> sql {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = "3306"
> login = "pf"
> password = "sdfghj"
> radius_db = "pf"
> read_groups = yes
> sqltrace = no
> sqltracefile = "/usr/local/pf/logs/sqltrace.sql"
> readclients = yes
> deletestalesessions = yes
> num_sql_socks = 5
> lifetime = 0
> max_queries = 0
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> nas_query = "SELECT nasname as id ,nasname, shortname, type, secret
> FROM radius_nas where INET_ATON(nasname) IS NOT NULL"
> authorize_check_query = "SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = '%{SQL-User-Name}'
> ORDER BY id"
> authorize_reply_query = "SELECT id, username, attribute, value, op
> FROM radreply WHERE username = '%{SQL-User-Name}'
> ORDER BY id"
> authorize_group_check_query = "SELECT id, groupname, attribute,
> Value, op FROM radgroupcheck WHERE groupname =
> '%{Sql-Group}' ORDER BY id"
> authorize_group_reply_query = "SELECT id, groupname, attribute,
> value, op FROM radgroupreply WHERE groupname =
> '%{Sql-Group}' ORDER BY id"
> accounting_onoff_query = " UPDATE radacct SET
> acctstoptime = '%S', acctsessiontime =
> unix_timestamp('%S') -
> unix_timestamp(acctstarttime), acctterminatecause =
> '%{Acct-Terminate-Cause}', acctstopdelay =
> %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL
> AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime
> <= '%S'"
> accounting_update_query = " CALL acct_update ( '%S',
> '%{Acct-Session-Time}', '%{%{Acct-Input-Gigawords}:-0}' << 32 |
> '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}', '%{Acct-Session-Id}', '%{SQL-User-Name}',
> '%{NAS-IP-Address}', '%{Framed-IP-Address}', '%{Acct-Status-Type}')"
> accounting_update_query_alt = " INSERT INTO radacct
> (acctsessionid, acctuniqueid, username, realm,
> nasipaddress, nasportid, nasporttype,
> acctstarttime, acctsessiontime, acctauthentic,
> connectinfo_start, acctinputoctets, acctoutputoctets,
> calledstationid, callingstationid, servicetype,
> framedprotocol, framedipaddress, acctstartdelay,
> xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
> '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
> '%{NAS-Port-Type}', DATE_SUB('%S',
> INTERVAL (%{%{Acct-Session-Time}:-0} +
> %{%{Acct-Delay-Time}:-0}) SECOND),
> '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
> '%{%{Acct-Input-Gigawords}:-0}' << 32 |
> '%{%{Acct-Input-Octets}:-0}',
> '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}',
> REPLACE(REPLACE('%{Called-Station-Id}','-',''),':',''),
> REPLACE(REPLACE('%{Calling-Station-Id}','-',''),':',''),
> '%{Service-Type}', '%{Framed-Protocol}',
> '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
> accounting_start_query = " CALL acct_start (
> '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
> '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0',
> '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> REPLACE(REPLACE('%{Called-Station-Id}','-',''),':',''),
> REPLACE(REPLACE('%{Calling-Station-Id}','-',''),':',''), '',
> '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
> '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}',
> '%{Acct-Status-Type}')"
> accounting_start_query_alt = " UPDATE radacct SET
> acctstarttime = '%S', acctstartdelay =
> '%{%{Acct-Delay-Time}:-0}', connectinfo_start =
> '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
> AND username = '%{SQL-User-Name}' AND nasipaddress
> = '%{NAS-IP-Address}'"
> accounting_stop_query = " CALL acct_stop ( '%S',
> '%{Acct-Session-Time}', '%{%{Acct-Input-Gigawords}:-0}' << 32
> | '%{%{Acct-Input-Octets}:-0}',
> '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}',
> '%{Acct-Terminate-Cause}',
> '%{%{Acct-Delay-Time}:-0}', '%{Connect-Info}',
> '%{Acct-Session-Id}', '%{SQL-User-Name}',
> '%{NAS-IP-Address}', '%{Acct-Status-Type}')"
> accounting_stop_query_alt = " INSERT INTO radacct
> (acctsessionid, acctuniqueid, username, realm, nasipaddress,
> nasportid, nasporttype, acctstarttime, acctstoptime,
> acctsessiontime, acctauthentic, connectinfo_start,
> connectinfo_stop, acctinputoctets, acctoutputoctets,
> calledstationid, callingstationid, acctterminatecause,
> servicetype, framedprotocol, framedipaddress, acctstartdelay,
> acctstopdelay) VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
> '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
> '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL
> (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0})
> SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}',
> '', '%{Connect-Info}',
> '%{%{Acct-Input-Gigawords}:-0}' << 32 |
> '%{%{Acct-Input-Octets}:-0}',
> '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}',
> REPLACE(REPLACE('%{Called-Station-Id}','-',''),':',''),
> REPLACE(REPLACE('%{Calling-Station-Id}','-',''),':',''),
> '%{Acct-Terminate-Cause}', '%{Service-Type}',
> '%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
> '%{%{Acct-Delay-Time}:-0}')"
> group_membership_query = "SELECT groupname FROM radusergroup
> WHERE username = '%{SQL-User-Name}' ORDER BY priority"
> connect_failure_retry_delay = 60
> simul_count_query = ""
> simul_verify_query = "SELECT radacctid, acctsessionid, username,
> nasipaddress, nasportid, framedipaddress,
> callingstationid, framedprotocol
> FROM radacct WHERE username =
> '%{SQL-User-Name}' AND acctstoptime IS NULL"
> postauth_query = "INSERT INTO radpostauth
> (username, pass, reply, authdate) VALUES (
> '%{User-Name}',
> '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')"
> safe-characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> rlm_sql (sql): Attempting to connect to pf@localhost:3306/pf
> rlm_sql (sql): starting 0
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
> rlm_sql_mysql: Starting connect to MySQL server for #0
> rlm_sql (sql): Connected new DB handle, #0
> rlm_sql (sql): starting 1
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
> rlm_sql_mysql: Starting connect to MySQL server for #1
> rlm_sql (sql): Connected new DB handle, #1
> rlm_sql (sql): starting 2
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
> rlm_sql_mysql: Starting connect to MySQL server for #2
> rlm_sql (sql): Connected new DB handle, #2
> rlm_sql (sql): starting 3
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
> rlm_sql_mysql: Starting connect to MySQL server for #3
> rlm_sql (sql): Connected new DB handle, #3
> rlm_sql (sql): starting 4
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
> rlm_sql_mysql: Starting connect to MySQL server for #4
> rlm_sql (sql): Connected new DB handle, #4
> rlm_sql (sql): Processing generate_sql_clients
> rlm_sql (sql) in generate_sql_clients: query is SELECT nasname as id
> ,nasname, shortname, type, secret FROM radius_nas where INET_ATON(nasname)
> IS NOT NULL
> rlm_sql (sql): Reserving sql socket id: 4
> rlm_sql (sql): Read entry
> nasname=172.16.202.10,shortname=172.16.202.10,secret=hola
> rlm_sql (sql): Adding client 172.16.202.10 (172.16.202.10, server=<none>)
> to clients list
> rlm_sql (sql): Released sql socket id: 4
> Module: Linked to module rlm_raw
> Module: Instantiating module "raw" from file
> /usr/local/pf/raddb/modules/raw
> }
> radiusd: #### Loading Virtual Servers ####
> server { # from file
> modules {
> Module: Creating Auth-Type = digest
> Module: Creating Post-Auth-Type = REJECT
> Module: Checking authenticate {...} for more modules to load
> Module: Linked to module rlm_pap
> Module: Instantiating module "pap" from file
> /usr/local/pf/raddb/modules/pap
> pap {
> encryption_scheme = "auto"
> auto_header = no
> }
> Module: Linked to module rlm_chap
> Module: Instantiating module "chap" from file
> /usr/local/pf/raddb/modules/chap
> Module: Linked to module rlm_mschap
> Module: Instantiating module "mschap" from file
> /usr/local/pf/raddb/modules/mschap
> mschap {
> use_mppe = yes
> require_encryption = yes
> require_strong = yes
> with_ntdomain_hack = yes
> ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
> --challenge=%{%{mschap:Challenge}:-00}
> --nt-response=%{%{mschap:NT-Response}:-00}"
> ntlm_auth_timeout = 3
> allow_retry = yes
> }
> Module: Linked to module rlm_digest
> Module: Instantiating module "digest" from file
> /usr/local/pf/raddb/modules/digest
> Module: Linked to module rlm_unix
> Module: Instantiating module "unix" from file
> /usr/local/pf/raddb/modules/unix
> unix {
> radwtmp = "/usr/local/pf/logs/radwtmp"
> }
> Module: Linked to module rlm_eap
> Module: Instantiating module "eap" from file /usr/local/pf/raddb/eap.conf
> eap {
> default_eap_type = "peap"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 2048
> }
> Module: Linked to sub-module rlm_eap_md5
> Module: Instantiating eap-md5
> Module: Linked to sub-module rlm_eap_tls
> Module: Instantiating eap-tls
> tls {
> rsa_key_exchange = no
> dh_key_exchange = yes
> rsa_key_length = 512
> dh_key_length = 512
> verify_depth = 0
> pem_file_type = yes
> private_key_file = "/usr/local/pf/raddb/certs/server.pem"
> certificate_file = "/usr/local/pf/raddb/certs/server.pem"
> CA_file = "/usr/local/pf/raddb/certs/ca.pem"
> private_key_password = "letserverin"
> dh_file = "/usr/local/pf/raddb/certs/dh"
> random_file = "/usr/local/pf/raddb/certs/random"
> fragment_size = 1024
> include_length = yes
> check_crl = no
> cipher_list = "DEFAULT"
> make_cert_command = "/usr/local/pf/raddb/certs/bootstrap"
> ecdh_curve = "prime256v1"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/";
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> Module: Linked to sub-module rlm_eap_ttls
> Module: Instantiating eap-ttls
> ttls {
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = yes
> use_tunneled_reply = yes
> virtual_server = "packetfence-tunnel"
> include_length = yes
> }
> Module: Linked to sub-module rlm_eap_peap
> Module: Instantiating eap-peap
> peap {
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = yes
> use_tunneled_reply = yes
> proxy_tunneled_request_as_eap = yes
> virtual_server = "packetfence-tunnel"
> soh = no
> }
> Module: Linked to sub-module rlm_eap_mschapv2
> Module: Instantiating eap-mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_preprocess
> Module: Instantiating module "preprocess" from file
> /usr/local/pf/raddb/modules/preprocess
> preprocess {
> huntgroups = "/usr/local/pf/raddb/huntgroups"
> hints = "/usr/local/pf/raddb/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> reading pairlist file /usr/local/pf/raddb/huntgroups
> reading pairlist file /usr/local/pf/raddb/hints
> Module: Linked to module rlm_realm
> Module: Instantiating module "suffix" from file
> /usr/local/pf/raddb/modules/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> Module: Linked to module rlm_files
> Module: Instantiating module "files" from file
> /usr/local/pf/raddb/modules/files
> files {
> usersfile = "/usr/local/pf/raddb/users"
> acctusersfile = "/usr/local/pf/raddb/acct_users"
> preproxy_usersfile = "/usr/local/pf/raddb/preproxy_users"
> compat = "no"
> }
> reading pairlist file /usr/local/pf/raddb/users
> reading pairlist file /usr/local/pf/raddb/acct_users
> reading pairlist file /usr/local/pf/raddb/preproxy_users
> Module: Checking preacct {...} for more modules to load
> Module: Linked to module rlm_acct_unique
> Module: Instantiating module "acct_unique" from file
> /usr/local/pf/raddb/modules/acct_unique
> acct_unique {
> key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
> NAS-Port"
> }
> Module: Checking accounting {...} for more modules to load
> Module: Linked to module rlm_detail
> Module: Instantiating module "detail" from file
> /usr/local/pf/raddb/modules/detail
> detail {
> detailfile =
> "/usr/local/pf/logs/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> detailperm = 384
> dirperm = 493
> locking = no
> log_packet_header = no
> }
> Module: Linked to module rlm_radutmp
> Module: Instantiating module "radutmp" from file
> /usr/local/pf/raddb/modules/radutmp
> radutmp {
> filename = "/usr/local/pf/logs/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> perm = 384
> callerid = yes
> }
> Module: Linked to module rlm_attr_filter
> Module: Instantiating module "attr_filter.accounting_response" from file
> /usr/local/pf/raddb/modules/attr_filter
> attr_filter attr_filter.accounting_response {
> attrsfile = "/usr/local/pf/raddb/attrs.accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /usr/local/pf/raddb/attrs.accounting_response
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> Module: Instantiating module "attr_filter.access_reject" from file
> /usr/local/pf/raddb/modules/attr_filter
> attr_filter attr_filter.access_reject {
> attrsfile = "/usr/local/pf/raddb/attrs.access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /usr/local/pf/raddb/attrs.access_reject
> } # modules
> } # server
> server soh-server { # from file
> /usr/local/pf/raddb/sites-enabled/packetfence-soh
> modules {
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_perl
> Module: Instantiating module "packetfence-soh" from file
> /usr/local/pf/raddb/modules/perl
> perl packetfence-soh {
> module = "/usr/local/pf/raddb/packetfence-soh.pm"
> func_authorize = "authorize"
> func_authenticate = "authenticate"
> func_accounting = "accounting"
> func_preacct = "preacct"
> func_checksimul = "checksimul"
> func_detach = "detach"
> func_xlat = "xlat"
> func_pre_proxy = "pre_proxy"
> func_post_proxy = "post_proxy"
> func_post_auth = "post_auth"
> func_recv_coa = "recv_coa"
> func_send_coa = "send_coa"
> }
> } # modules
> } # server
> server dynamic_client_server { # from file
> /usr/local/pf/raddb/sites-enabled/dynamic-clients
> modules {
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_dynamic_clients
> Module: Instantiating module "dynamic_clients" from file
> /usr/local/pf/raddb/modules/dynamic_clients
> Module: Linked to module rlm_always
> Module: Instantiating module "ok" from file
> /usr/local/pf/raddb/modules/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> } # modules
> } # server
> server packetfence { # from file
> /usr/local/pf/raddb/sites-enabled/packetfence
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Checking authorize {...} for more modules to load
> Module: Instantiating module "packetfence" from file
> /usr/local/pf/raddb/modules/perl
> perl packetfence {
> module = "/usr/local/pf/raddb/packetfence.pm"
> func_authorize = "authorize"
> func_authenticate = "authenticate"
> func_accounting = "accounting"
> func_preacct = "preacct"
> func_checksimul = "checksimul"
> func_detach = "detach"
> func_xlat = "xlat"
> func_pre_proxy = "pre_proxy"
> func_post_proxy = "post_proxy"
> func_post_auth = "post_auth"
> func_recv_coa = "recv_coa"
> func_send_coa = "send_coa"
> }
> } # modules
> } # server
> server dynamic_client_server { # from file
> /usr/local/pf/raddb/sites-enabled/dynamic-clients
> modules {
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_dynamic_clients
> Module: Instantiating module "dynamic_clients" from file
> /usr/local/pf/raddb/modules/dynamic_clients
> Module: Linked to module rlm_always
> Module: Instantiating module "ok" from file
> /usr/local/pf/raddb/modules/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> } # modules
> } # server
> server packetfence { # from file
> /usr/local/pf/raddb/sites-enabled/packetfence
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Checking authorize {...} for more modules to load
> Module: Instantiating module "packetfence" from file
> /usr/local/pf/raddb/modules/perl
> perl packetfence {
> module = "/usr/local/pf/raddb/packetfence.pm"
> func_authorize = "authorize"
> func_authenticate = "authenticate"
> func_accounting = "accounting"
> func_preacct = "preacct"
> func_checksimul = "checksimul"
> func_detach = "detach"
> func_xlat = "xlat"
> func_pre_proxy = "pre_proxy"
> func_post_proxy = "post_proxy"
> func_post_auth = "post_auth"
> func_recv_coa = "recv_coa"
> func_send_coa = "send_coa"
> }
> Module: Checking preacct {...} for more modules to load
> Module: Checking accounting {...} for more modules to load
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> } # modules
> } # server
> server packetfence-tunnel { # from file
> /usr/local/pf/raddb/sites-enabled/packetfence-tunnel
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Checking authorize {...} for more modules to load
> Module: Instantiating module "ntdomain" from file
> /usr/local/pf/raddb/modules/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\"
> ignore_default = no
> ignore_null = no
> }
> Module: Instantiating module "pflocal" from file
> /usr/local/pf/raddb/sql.conf
> sql pflocal {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = "3306"
> login = "pf"
> password = "sdfghj"
> radius_db = "pf"
> read_groups = yes
> sqltrace = no
> sqltracefile = "/usr/local/pf/logs/sqltrace.sql"
> readclients = no
> deletestalesessions = yes
> num_sql_socks = 5
> lifetime = 0
> max_queries = 0
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> nas_query = "SELECT id,nasname,shortname,type,secret FROM nas"
> authorize_check_query = "SELECT 1, pid, "Cleartext-Password", password,
> ":=" FROM password WHERE pid = '%{SQL-User-Name}'
> AND NOT EXISTS (SELECT pid FROM activation WHERE pid =
> '%{SQL-User-Name}') "
> authorize_reply_query = ""
> authorize_group_check_query = ""
> authorize_group_reply_query = ""
> accounting_onoff_query = ""
> accounting_update_query = ""
> accounting_update_query_alt = ""
> accounting_start_query = ""
> accounting_start_query_alt = ""
> accounting_stop_query = ""
> accounting_stop_query_alt = ""
> group_membership_query = ""
> connect_failure_retry_delay = 60
> simul_count_query = ""
> simul_verify_query = ""
> postauth_query = ""
> safe-characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> rlm_sql Creating new attribute pflocal-SQL-Group
> rlm_sql (pflocal): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> rlm_sql (pflocal): Attempting to connect to pf@localhost:3306/pf
> rlm_sql (pflocal): starting 0
> rlm_sql (pflocal): Attempting to connect rlm_sql_mysql #0
> rlm_sql_mysql: Starting connect to MySQL server for #0
> rlm_sql (pflocal): Connected new DB handle, #0
> rlm_sql (pflocal): starting 1
> rlm_sql (pflocal): Attempting to connect rlm_sql_mysql #1
> rlm_sql_mysql: Starting connect to MySQL server for #1
> rlm_sql (pflocal): Connected new DB handle, #1
> rlm_sql (pflocal): starting 2
> rlm_sql (pflocal): Attempting to connect rlm_sql_mysql #2
> rlm_sql_mysql: Starting connect to MySQL server for #2
> rlm_sql (pflocal): Connected new DB handle, #2
> rlm_sql (pflocal): starting 3
> rlm_sql (pflocal): Attempting to connect rlm_sql_mysql #3
> rlm_sql_mysql: Starting connect to MySQL server for #3
> rlm_sql (pflocal): Connected new DB handle, #3
> rlm_sql (pflocal): starting 4
> rlm_sql (pflocal): Attempting to connect rlm_sql_mysql #4
> rlm_sql_mysql: Starting connect to MySQL server for #4
> rlm_sql (pflocal): Connected new DB handle, #4
> Module: Instantiating module "pfguest" from file
> /usr/local/pf/raddb/sql.conf
> sql pfguest {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = "3306"
> login = "pf"
> password = "sdfghj"
> radius_db = "pf"
> read_groups = yes
> sqltrace = no
> sqltracefile = "/usr/local/pf/logs/sqltrace.sql"
> readclients = no
> deletestalesessions = yes
> num_sql_socks = 5
> lifetime = 0
> max_queries = 0
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> nas_query = "SELECT id,nasname,shortname,type,secret FROM nas"
> authorize_check_query = "SELECT 1, pid, "Cleartext-Password", password,
> ":=" FROM password JOIN activation using (pid)
> WHERE pid = '%{SQL-User-Name}' AND (SELECT type from
> activation WHERE pid='%{SQL-User-Name}' ORDER BY code_id DESC LIMIT 1) =
> "guest" AND now() <= password.unregdate LIMIT 1 "
> authorize_reply_query = ""
> authorize_group_check_query = ""
> authorize_group_reply_query = ""
> accounting_onoff_query = ""
> accounting_update_query = ""
> accounting_update_query_alt = ""
> accounting_start_query = ""
> accounting_start_query_alt = ""
> accounting_stop_query = ""
> accounting_stop_query_alt = ""
> group_membership_query = ""
> connect_failure_retry_delay = 60
> simul_count_query = ""
> simul_verify_query = ""
> postauth_query = ""
> safe-characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> rlm_sql Creating new attribute pfguest-SQL-Group
> rlm_sql (pfguest): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> rlm_sql (pfguest): Attempting to connect to pf@localhost:3306/pf
> rlm_sql (pfguest): starting 0
> rlm_sql (pfguest): Attempting to connect rlm_sql_mysql #0
> rlm_sql_mysql: Starting connect to MySQL server for #0
> rlm_sql (pfguest): Connected new DB handle, #0
> rlm_sql (pfguest): starting 1
> rlm_sql (pfguest): Attempting to connect rlm_sql_mysql #1
> rlm_sql_mysql: Starting connect to MySQL server for #1
> rlm_sql (pfguest): Connected new DB handle, #1
> rlm_sql (pfguest): starting 2
> rlm_sql (pfguest): Attempting to connect rlm_sql_mysql #2
> rlm_sql_mysql: Starting connect to MySQL server for #2
> rlm_sql (pfguest): Connected new DB handle, #2
> rlm_sql (pfguest): starting 3
> rlm_sql (pfguest): Attempting to connect rlm_sql_mysql #3
> rlm_sql_mysql: Starting connect to MySQL server for #3
> rlm_sql (pfguest): Connected new DB handle, #3
> rlm_sql (pfguest): starting 4
> rlm_sql (pfguest): Attempting to connect rlm_sql_mysql #4
> rlm_sql_mysql: Starting connect to MySQL server for #4
> rlm_sql (pfguest): Connected new DB handle, #4
> Module: Instantiating module "pfsponsor" from file
> /usr/local/pf/raddb/sql.conf
> sql pfsponsor {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = "3306"
> login = "pf"
> password = "sdfghj"
> radius_db = "pf"
> read_groups = yes
> sqltrace = no
> sqltracefile = "/usr/local/pf/logs/sqltrace.sql"
> readclients = no
> deletestalesessions = yes
> num_sql_socks = 5
> lifetime = 0
> max_queries = 0
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> nas_query = "SELECT id,nasname,shortname,type,secret FROM nas"
> authorize_check_query = "SELECT 1, pid, "Cleartext-Password", password,
> ":=" FROM password JOIN activation using (pid)
> WHERE pid = '%{SQL-User-Name}' AND (SELECT type from
> activation WHERE pid='%{SQL-User-Name}' ORDER BY code_id DESC LIMIT 1) =
> "sponsor" AND now() <= password.unregdate LIMIT 1 "
> authorize_reply_query = ""
> authorize_group_check_query = ""
> authorize_group_reply_query = ""
> accounting_onoff_query = ""
> accounting_update_query = ""
> accounting_update_query_alt = ""
> accounting_start_query = ""
> accounting_start_query_alt = ""
> accounting_stop_query = ""
> accounting_stop_query_alt = ""
> group_membership_query = ""
> connect_failure_retry_delay = 60
> simul_count_query = ""
> simul_verify_query = ""
> postauth_query = ""
> safe-characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> rlm_sql Creating new attribute pfsponsor-SQL-Group
> rlm_sql (pfsponsor): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded
> and linked
> rlm_sql (pfsponsor): Attempting to connect to pf@localhost:3306/pf
> rlm_sql (pfsponsor): starting 0
> rlm_sql (pfsponsor): Attempting to connect rlm_sql_mysql #0
> rlm_sql_mysql: Starting connect to MySQL server for #0
> rlm_sql (pfsponsor): Connected new DB handle, #0
> rlm_sql (pfsponsor): starting 1
> rlm_sql (pfsponsor): Attempting to connect rlm_sql_mysql #1
> rlm_sql_mysql: Starting connect to MySQL server for #1
> rlm_sql (pfsponsor): Connected new DB handle, #1
> rlm_sql (pfsponsor): starting 2
> rlm_sql (pfsponsor): Attempting to connect rlm_sql_mysql #2
> rlm_sql_mysql: Starting connect to MySQL server for #2
> rlm_sql (pfsponsor): Connected new DB handle, #2
> rlm_sql (pfsponsor): starting 3
> rlm_sql (pfsponsor): Attempting to connect rlm_sql_mysql #3
> rlm_sql_mysql: Starting connect to MySQL server for #3
> rlm_sql (pfsponsor): Connected new DB handle, #3
> rlm_sql (pfsponsor): starting 4
> rlm_sql (pfsponsor): Attempting to connect rlm_sql_mysql #4
> rlm_sql_mysql: Starting connect to MySQL server for #4
> rlm_sql (pfsponsor): Connected new DB handle, #4
> Module: Instantiating module "pfsms" from file
> /usr/local/pf/raddb/sql.conf
> sql pfsms {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = "3306"
> login = "pf"
> password = "sdfghj"
> radius_db = "pf"
> read_groups = yes
> sqltrace = no
> sqltracefile = "/usr/local/pf/logs/sqltrace.sql"
> readclients = no
> deletestalesessions = yes
> num_sql_socks = 5
> lifetime = 0
> max_queries = 0
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> nas_query = "SELECT id,nasname,shortname,type,secret FROM nas"
> authorize_check_query = "SELECT 1, pid, "Cleartext-Password", password,
> ":=" FROM password JOIN activation using (pid)
> WHERE pid = '%{SQL-User-Name}' AND (SELECT type from
> activation WHERE pid='%{SQL-User-Name}' ORDER BY code_id DESC LIMIT 1) =
> "sms" AND now() <= password.unregdate LIMIT 1 "
> authorize_reply_query = ""
> authorize_group_check_query = ""
> authorize_group_reply_query = ""
> accounting_onoff_query = ""
> accounting_update_query = ""
> accounting_update_query_alt = ""
> accounting_start_query = ""
> accounting_start_query_alt = ""
> accounting_stop_query = ""
> accounting_stop_query_alt = ""
> group_membership_query = ""
> connect_failure_retry_delay = 60
> simul_count_query = ""
> simul_verify_query = ""
> postauth_query = ""
> safe-characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> rlm_sql Creating new attribute pfsms-SQL-Group
> rlm_sql (pfsms): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> rlm_sql (pfsms): Attempting to connect to pf@localhost:3306/pf
> rlm_sql (pfsms): starting 0
> rlm_sql (pfsms): Attempting to connect rlm_sql_mysql #0
> rlm_sql_mysql: Starting connect to MySQL server for #0
> rlm_sql (pfsms): Connected new DB handle, #0
> rlm_sql (pfsms): starting 1
> rlm_sql (pfsms): Attempting to connect rlm_sql_mysql #1
> rlm_sql_mysql: Starting connect to MySQL server for #1
> rlm_sql (pfsms): Connected new DB handle, #1
> rlm_sql (pfsms): starting 2
> rlm_sql (pfsms): Attempting to connect rlm_sql_mysql #2
> rlm_sql_mysql: Starting connect to MySQL server for #2
> rlm_sql (pfsms): Connected new DB handle, #2
> rlm_sql (pfsms): starting 3
> rlm_sql (pfsms): Attempting to connect rlm_sql_mysql #3
> rlm_sql_mysql: Starting connect to MySQL server for #3
> rlm_sql (pfsms): Connected new DB handle, #3
> rlm_sql (pfsms): starting 4
> rlm_sql (pfsms): Attempting to connect rlm_sql_mysql #4
> rlm_sql_mysql: Starting connect to MySQL server for #4
> rlm_sql (pfsms): Connected new DB handle, #4
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> } # modules
> } # server
> server inner-tunnel { # from file
> /usr/local/pf/raddb/sites-enabled/inner-tunnel
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Checking authorize {...} for more modules to load
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> } # modules
> } # server
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> virtual_server = "packetfence"
> ipaddr = 172.16.202.5
> port = 1812
> }
> listen {
> type = "acct"
> virtual_server = "packetfence"
> ipaddr = 172.16.202.5
> port = 1813
> }
> listen {
> type = "control"
> listen {
> socket = "/usr/local/pf/var/run/radiusd.sock"
> mode = "rw"
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18140
> }
> ... adding new socket proxy address * port 60261
> Listening on authentication address 172.16.202.5 port 1812 as server
> packetfence
> Listening on accounting address 172.16.202.5 port 1813 as server
> packetfence
> Listening on command file /usr/local/pf/var/run/radiusd.sock
> Listening on authentication address 127.0.0.1 port 18140 as server
> inner-tunnel
> Listening on proxy address 172.16.202.5 port 1814
> Ready to process requests.
>
>
>
> 2015-05-27 16:40 GMT+02:00 Sohaib Afourid <[email protected]>:
>
>> I know, and I'm gratefull for that, but still, nobody has answered my
>> question, and my case is not explained in the documentation. the only think
>> i changed in etc/raddb is the eap type, i set it to PEAP because i don't
>> want to use a client certificate.
>> What i need right now is for someone to explain to me a SCENARIO for
>> packetfence with 802.1x.
>> And thank for everyone who has taken time to answer my question.
>>
>> 2015-05-27 16:23 GMT+02:00 Sohaib Afourid <[email protected]>:
>>
>>> well there are two radius instances, the one in /etc/raddb and the one
>>> in /usr/local/pf
>>> i changed the ports for the first one 1645 for auth and 1646 for acct
>>> and 1812/1813 for the pf radius.
>>> the first instance is stopped while the pf radiusd is launched.
>>>
>>> 2015-05-27 15:28 GMT+02:00 Sohaib Afourid <[email protected]>:
>>>
>>>> Hello, i've been trying to set up Packetfence as part of a three month
>>>> internship. i'm using a Cisco Catalyst 3560 switch and Centos 6.6 on a
>>>> virtualbox as a host for Packetfence, and my own personal laptop as a
>>>> client.
>>>> at first I set up freeradius (independently) succefully using PEAP. It
>>>> worked properly and I got my laptop to be succefully authenticated (using
>>>> self signed certificate etc...).
>>>> The problem is i can't make it work with packetfence, or maybe i don't
>>>> know how to correctly
>>>> i followed the steps on the device guide, the dot1x authentication
>>>> fails and goes right to MAB and my laptop gets redirected to the
>>>> registration vlan, but it is not what is required of me.
>>>> I need to configure Packetfence to use 802.1x authentication with MySQL
>>>> and a captive portal.
>>>>
>>>> Would someone please explain to me a scenario where a new user can
>>>> login to the network using 802.1x via packetfence
>>>> is it by using the captive portal ? or the window that pops up on
>>>> Windows where i insert my username and password ?
>>>> which username and password am i supposed to use ? the ones in the
>>>> users GUI or in the usr/local/pf/raddb/users file ? i'm stuck and i need
>>>> help.
>>>>
>>>> If you need me to post the content of any configuration file let me
>>>> know.
>>>>
>>>>
>>>>
>>>
>>
>
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
