Hi Fabrice,I tried to do what you said me and i have this .The interface
configured for the device is fa 0/2Thanks
Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0
flushes, 0 overruns) Console logging: level debugging, 38 messages logged
Monitor logging: level debugging, 0 messages logged Buffer logging: level
debugging, 38 messages logged Exception Logging: size (4096 bytes) File
logging: disabled Trap logging: level informational, 42 message lines logged
Log Buffer (4096 bytes):
00:00:14: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type
vlan00:00:18: %SYS-5-RESTART: System restarted --Cisco Internetwork Operating
System SoftwareIOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA8,
RELEASE SOFTWARE (fc1)Copyright (c) 1986-2006 by cisco Systems, Inc.Compiled
Fri 12-May-06 17:19 by myl00:00:18: %SNMP-5-COLDSTART: SNMP agent on host
Switch is undergoing a cold start00:00:58: %LINK-5-CHANGED: Interface Vlan1,
changed state to administratively down00:03:11: %SYS-5-CONFIG_I: Configured
from console by console00:03:31: %LINK-3-UPDOWN: Interface Vlan10, changed
state to up00:03:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10,
changed state to down00:03:54: %SYS-5-CONFIG_I: Configured from console by
console00:04:36: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to
up00:04:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1,
changed state to up00:04:49: %SYS-5-CONFIG_I: Configured from console by
console00:05:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10,
changed state to up00:05:45: %SYS-5-CONFIG_I: Configured from console by
console00:19:55: %SYS-5-CONFIG_I: Configured from console by console00:21:34:
%SYS-5-CONFIG_I: Configured from console by console00:25:12: %SYS-5-CONFIG_I:
Configured from console by console00:51:51: %RADIUS-4-NOSERV: Warning: Server
192.168.1.1:1812,1813 is not defined.00:52:01: %SYS-5-CONFIG_I: Configured from
console by admin on console00:55:09: %SYS-5-CONFIG_I: Configured from console
by admin on console00:55:42: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed
state to up00:57:34: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state
to down00:57:38: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up00:57:43: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down00:57:51: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up01:00:01: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down01:00:06: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up01:01:01: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down01:01:04: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up01:02:40: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down01:02:43: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up01:05:09: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down01:05:12: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up01:07:57: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down01:08:01: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up01:08:54: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down01:08:58: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
up01:09:02: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to
down01:09:06: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to up
Le Jeudi 25 février 2016 0h29, Durand fabrice <[email protected]> a écrit :
Hi Amidou,
on the cisco switch do a "term mon" unplug and plug the device in the switch
port and check the log on the screen.
Regards
Fabrice
Le 2016-02-24 15:06, TOURE Amidou Florian a écrit :
Starting Radius in debug mode gives the screenshoot below. 192.168.10.1 is my
switch management ip interface
Le Mercredi 24 février 2016 20h36, TOURE Amidou Florian
<[email protected]> a écrit :
Now i have this (in the scrrenshoot below). Checking the sql.conf file
doesn't show me any errors. For my users i use an Active Directory in a cluster
Thanks
Le Mercredi 24 février 2016 16h39, Bebbet van Dinges <[email protected]>
a écrit :
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
When you do tcpdump, it wont give packets right away. Try running
tcpdump and then generate triggers (unplug/plug cable, reauthenticate
mac-based security...) the daemon seems to be listening, but with sql
errors.. Check the sql configuration.. in the radius directory the
sql.conf file (i believe)
Bebbet
On 24-2-2016 16:23, TOURE Amidou Florian wrote:
> Hi Ludovic i have this (In the screenshot below).I think that its
> works. But i don't understand why i cannot connect a host. testing
> with tcpdump gives the other screenshot below. I have always the
> same problem. I have nothing when i connect the switch. Thanks
>
>
> Le Mercredi 24 février 2016 16h00, Ludovic Zammit
> <[email protected]> a écrit :
>
>
> Hello Florian,
>
> Do you know why radius fails ?
>
> You can check into the /usr/local/pf/logs/radius.log
>
> Thanks,
>
> Ludovic Zammit [email protected] :: +1.514.447.4918 (x145) ::
> www.inverse.ca Inverse inc. :: Leaders behind SOGo
> (http://www.sogo.nu) and PacketFence (http://packetfence.org)
>
>
>
>
>
>
>> Le 24 févr. 2016 à 09:43, TOURE Amidou Florian
>> <[email protected]> a écrit :
>>
>> Hi Ludovic i also remarqued that when i want to start radius
>> with service radiusd start it fails.Can you help me to solve the
>> problem? Thank you
>>
>>
>> Le Lundi 22 février 2016 22h40, TOURE Amidou Florian
>> <[email protected]> a écrit :
>>
>>
>> Sorry i wanted to say radius doesn't running
>>
>> Envoyé depuis Yahoo Mail pour Android
>>
>> Le lun. j févr. PM à 21:31, TOURE Amidou Florian
>> <[email protected]> a écrit : Hi Ludovic.Yes i can ping
>> the server with my switch.But when I verify the radius requests I
>> have the message on the screenshot below.I think that the radius
>> request dont't coming.How can I solve it? Thank you
>>
>>
>>
>>
>> Le Lundi 22 février 2016 16h22, Ludovic Zammit
>> <[email protected]> a écrit :
>>
>>
>> Hello Florian,
>>
>> Can you ping your switch from the PacketFence management
>> interface ?
>>
>> Do you see the radius request coming in with tcpdump ?
>>
>> https://github.com/inverse-inc/packetfence/blob/devel/docs/PacketFenc
e_Network_Devices_Configuration_Guide.asciidoc
>>
>>
>>
Look for 2950.
>>
>> Thanks,
>>
>> Ludovic Zammit [email protected] :: +1.514.447.4918 (x145) ::
>> www.inverse.ca Inverse inc. :: Leaders behind SOGo
>> (http://www.sogo.nu) and PacketFence (http://packetfence.org)
>>
>>
>>
>>
>>
>>
>>> Le 20 févr. 2016 à 12:28, TOURE Amidou Florian
>>> <[email protected]> a écrit :
>>>
>>> Hi, I have configured my Cisco 2950 to work with packetfence
>>> but when i plug an user on one port of the switch nothing
>>> happens Packetfence address : 192.168.1.1 Switch ip address :
>>> 192.168.1.5 My first configuration had errors so i done an
>>> other configuration but : If someone can help me it would be a
>>> pleasure for me because i tried and found nothing : Thank you :
>>> This is my configuration file
>>>
>>> Building configuration...
>>>
>>> Current configuration : 2292 bytes ! version 12.1 no service
>>> pad service timestamps debug uptime service timestamps log
>>> uptime no service password-encryption ! hostname Switch ! aaa
>>> new-model aaa group server radius packetfence server
>>> 192.168.1.1 auth-port 1812 acct-port 1813 ! aaa authentication
>>> login default local aaa authentication dot1x default group
>>> packetfence aaa authorization network default group
>>> packetfence ! username admin secret 5
>>> $1$/MxH$k5kiGxIQuPa3fBM/zCO5D1 ip subnet-zero ! ! spanning-tree
>>> mode pvst no spanning-tree optimize bpdu transmission
>>> spanning-tree extend system-id dot1x system-auth-control ! ! !
>>> ! interface FastEthernet0/1 switchport trunk native vlan 10
>>> switchport trunk allowed vlan 10,20,30,40,60,100 switchport
>>> mode trunk ! interface FastEthernet0/2 switchport access vlan
>>> 10 switchport mode access dot1x port-control auto dot1x
>>> host-mode multi-host dot1x reauthentication spanning-tree
>>> portfast ! interface FastEthernet0/3 switchport access vlan 20
>>> switchport mode access switchport port-security switchport
>>> port-security violation restrict switchport port-security
>>> mac-address sticky switchport port-security mac-address sticky
>>> 0040.d067.d0b1 ! interface FastEthernet0/4 ! interface
>>> FastEthernet0/5 ! interface FastEthernet0/6 ! interface
>>> FastEthernet0/7 ! interface FastEthernet0/8 ! interface
>>> FastEthernet0/9 ! interface FastEthernet0/10 ! interface
>>> FastEthernet0/11 ! interface FastEthernet0/12 ! interface
>>> FastEthernet0/13 ! interface FastEthernet0/14 ! interface
>>> FastEthernet0/15 ! interface FastEthernet0/16 ! interface
>>> FastEthernet0/17 ! interface FastEthernet0/18 ! interface
>>> FastEthernet0/19 ! interface FastEthernet0/20 ! interface
>>> FastEthernet0/21 ! interface FastEthernet0/22 ! interface
>>> FastEthernet0/23 ! interface FastEthernet0/24 ! interface
>>> Vlan1 no ip address no ip route-cache shutdown ! interface
>>> Vlan10 ip address 192.168.1.5 255.255.255.0 ip helper-address
>>> 192.168.10.1 no ip route-cache ! ip http server snmp-server
>>> enable traps port-security snmp-server enable traps
>>> port-security trap-rate 1 snmp-server host 192.168.1.1 version
>>> 2c public port-security radius-server host 192.168.1.1
>>> auth-port 1812 acct-port 1813 timeout 2 key thegame
>>> radius-server retransmit 3 radius-server vsa send
>>> authentication ! line con 0 line vty 5 15 ! ! end
>>>
>>> --------------------------------------------------------------------
- ----------
>>>
>>>
Site24x7 APM Insight: Get Deep Visibility into Application
>>> Performance APM + Mobile APM + RUM: Monitor 3 App instances at
>>> just $35/Month Monitor end-to-end web transactions and take
>>> corrective actions now Troubleshoot faster and improve end-user
>>> experience. Signup Now!
>>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140____
___________________________________________
>>>
>>>
PacketFence-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>>
>> ---------------------------------------------------------------------
- ---------
>>
>>
Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> APM + Mobile APM + RUM: Monitor 3 App instances at just
>> $35/Month Monitor end-to-end web transactions and take corrective
>> actions now Troubleshoot faster and improve end-user experience.
>> Signup Now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>>
>> _______________________________________________ PacketFence-users
>> mailing list [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>>
>> ---------------------------------------------------------------------
- ---------
>>
>>
Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> APM + Mobile APM + RUM: Monitor 3 App instances at just
>> $35/Month Monitor end-to-end web transactions and take corrective
>> actions now Troubleshoot faster and improve end-user experience.
>> Signup Now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>> _______________________________________________ PacketFence-users
>> mailing list [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>>
>> ---------------------------------------------------------------------
- ---------
>>
>>
Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> APM + Mobile APM + RUM: Monitor 3 App instances at just
>> $35/Month Monitor end-to-end web transactions and take corrective
>> actions now Troubleshoot faster and improve end-user experience.
>> Signup Now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>>
>> _______________________________________________ PacketFence-users
>> mailing list [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>>
>> ---------------------------------------------------------------------
- ---------
>>
>>
Site24x7 APM Insight: Get Deep Visibility into Application Performance
>> APM + Mobile APM + RUM: Monitor 3 App instances at just
>> $35/Month Monitor end-to-end web transactions and take corrective
>> actions now Troubleshoot faster and improve end-user experience.
>> Signup Now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140_____
__________________________________________
>>
>>
PacketFence-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
> ----------------------------------------------------------------------
- --------
>
>
Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions
> now Troubleshoot faster and improve end-user experience. Signup
> Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>
> _______________________________________________ PacketFence-users
> mailing list [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
>
> ----------------------------------------------------------------------
- --------
>
>
Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions
> now Troubleshoot faster and improve end-user experience. Signup
> Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
>
>
>
> _______________________________________________ PacketFence-users
> mailing list [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HA7V
-----END PGP SIGNATURE-----
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
