When I attempt to test FreeRadius with a test user in
/usr/local/pf/raddb/users I get a failure that states "CLI Access is not
permit on this switch". I have "cliAccess=Y" in switches.conf. Is there
somewhere else I need to enable CLI access?
Thanks
packetfence.log:
Dec 06 12:04:36 httpd.aaa(24559) WARN: [mac:[undef]] CLI Access is not permit
on this switch 192.168.14.60 (pf::radius::switch_access)
This occurs as a repsonse to:
radtest -t mschap -x test2 packet localhost:18120 12 testing123
radtest responds with:
Sent Access-Request Id 224 from 0.0.0.0:50101 to 127.0.0.1:18120 length 131
User-Name = "test2"
MS-CHAP-Password = "packet"
NAS-IP-Address = 192.168.14.60
NAS-Port = 12
Message-Authenticator = 0x00
Cleartext-Password = "packet"
MS-CHAP-Challenge = 0x7d970590bf9b3c20
MS-CHAP-Response =
0x00010000000000000000000000000000000000000000000000001d61ecc9a3fc6222a13bccde625540a3048270707271bf1c
Received Access-Reject Id 224 from 127.0.0.1:18120 to 0.0.0.0:0 length 20
(0) -: Expected Access-Accept got Access-Reject
I have the following entry in |/usr/local/pf/raddb/users
|||
test2 Cleartext-Password := "packet"
------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today.http://sdm.link/xeonphi
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
