Hi All,
What might be a way to set up both a cluster for redundancy and also enable
Inline mode?
I have a need for both, but am unsure that I should try to add it to the
clustered machines.
Should I have a separate PF installation for the inline?
To clarify my intentions a bit:
What we wanted to try to do is to put any unregistered machine into our guest
network after accepting the terms in the aup-text via the captive portal, to
protect our wired connections within the office.
Easy enough, and already achieved using a PF 7 cluster. But I see that Inline
mode is not supported on the clustered machines.
We had originally planned on using Inline mode for wireless connections. Right
now, our policy is not to allow any wireless connections to our internal
network, so our wireless is really just guest access, but we want to make
wireless users accept the same aup-text terms before granting access. So we
were supposing we could use packetfence as a hotspot to present the terms and
conditions and to control the wireless access. And have an easy route to our
internal network should the emergency need arise, or policies change.
Should I use a WLAN controller instead? (But then the controller is a single
point of failure.)
Has anyone set up anything similar? Looking for ideas on how this could be
achieved.
Thanks
________________________________
>>> CONFIDENTIALITY NOTICE <<<
This electronic mail (e-mail) message, including any and/or all attachments, is
for the sole use of the intended recipient(s), and may contain confidential
and/or privileged information, pertaining to business conducted under the
direction and supervision of EarthColor, Inc. All e-mail messages, which may
have been established as expressed views and/or opinions (stated either within
the e-mail message or any of its attachments), are left to the sole
responsibility of that of the sender, and are not necessarily attributed to
EarthColor, Inc. Unauthorized interception, review, use, disclosure or
distribution of any such information contained within this e-mail message
and/or its attachment(s), is(are) strictly prohibited. If you are not the
intended recipient, please contact the sender by replying to this e-mail
message, along with the destruction of all copies of the original e-mail
message (along with any attachments).
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
