Your best option may well be to use inline for this use case. Or get some supported gear, sometimes you can get free examples for attending webinars from Aerohive or Meraki
Bebbet On 5-9-2017 12:49, Spencer Hazell via PacketFence-users wrote: > Hi, > > > > I spent a long time but have finally configured my HP 1920 (using > H3C::S5120) and it is working well for port connected devices. However > I have VigorAP902 access point, which appears to not be supported. I > should mention I’m using out of band vlan enforcement with my HP switch. > > > > Is it possible that the Access Point that connects to my working switch > can be configured in a way that uses the configuration from my switch > and the AP can act as a dumb/transparent device? I.E vlan > assignment/deauthentication is done by the HP switch and not the AP. > > > > If not, what are my options? > > > > Thanks > > Spencer > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > > _______________________________________________ > PacketFence-users mailing list > PacketFence-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/packetfence-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
