Hi, I’m new to packetfence and very lost on how to set it up for guest wifi
captive portal. I’m trying to setup vlan enforcement so guest users go
through captive portal for term and conditions for internet.

I’m not using 802.1x or anything, I just want any wireless guest users to
be redirected to a basic captive portal for temporary internet access.

I set up 2 network interfaces in packetfence; 1 for management/captive
portal(10.5.225.0/24) and 1 for registration interface(172.17.67.0/24).
Null type authentication source is setup with

: condition equals = <testSSID> then set = role <guest> and duration <1
hour>.

I also setup Network device for Cisco wireless controllers with ACLs. Cisco
WLC side is all set up with ACLs, CoA, RADIUS, WPA2 security, etc.

When I connect to this test SSID through cisco WLC, test phones don’t get
redirected to captive portal, it just connects to SSID/Internet like there
is no packetfence at all.

I must be missing very fundamental step, but not sure what it is. Can
someone give me some high-level setup instructions or some pointers to
where to check?



Thank you
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to