Le 2018-05-20 à 07:35, 권혁일 via PacketFence-users a écrit :
firstly, I installed PacketFence in VMware, and opened this ip.
192.168.232.128 is my PacketFence IP. then, I selected VLAN
enforcement. In two step, I set eth0 as management, and added two VLANs as
Virtual LAN ID : 20 IP Address : 192.168.20.1 Netmask : 255.255.255.0
Type : Registration
Virtual LAN ID : 30 IP Address : 192.168.30.1 Netmask : 255.255.255.0
Type : Isolation
also Default Gateway is 192.168.232.1
I completed final step, and set IP of Windows 7 and Windows XP as
192.168.20.10, 192.168.30.10
The packetfence's DHCP manage the vlan 20 and 30 , so plug something in
this vlan and you will receive an ip from packetfence.
after that when I went into nodes tab, the Windows 7 was registered by
192.168.232.1
It mean that your device has been registered and packetfence changed the
vlan (production vlan)
how can I set(or change) the IP of Windows 7 as 192.168.20.10?
If the ip changed it mean that packetfence got a dhcp traffic with this
new ip.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
